lkml.org 
[lkml]   [2018]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V8 18/21] dt-bindings: csky CPU Bindings
Date
This patch adds the documentation to describe that how to add cpu nodes in
dts for SMP.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/csky/cpus.txt | 70 +++++++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/csky/cpus.txt

diff --git a/Documentation/devicetree/bindings/csky/cpus.txt b/Documentation/devicetree/bindings/csky/cpus.txt
new file mode 100644
index 0000000..ee3901d
--- /dev/null
+++ b/Documentation/devicetree/bindings/csky/cpus.txt
@@ -0,0 +1,70 @@
+==================
+C-SKY CPU Bindings
+==================
+
+The device tree allows to describe the layout of CPUs in a system through
+the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+defining properties for every cpu.
+
+Only SMP system need to care about the cpus node and single processor
+needn't define cpus node at all.
+
+=====================================
+cpus and cpu node bindings definition
+=====================================
+
+- cpus node
+
+ Description: Container of cpu nodes
+
+ The node name must be "cpus".
+
+ A cpus node must define the following properties:
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: must be set to 1
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: must be set to 0
+
+- cpu node
+
+ Description: Describes one of SMP cores
+
+ PROPERTIES
+
+ - device_type
+ Usage: required
+ Value type: <string>
+ Definition: must be "cpu"
+ - reg
+ Usage: required
+ Value type: <u32>
+ Definition: CPU index
+ - status:
+ Usage: required
+ Value type: <string>
+ Definition: "ok" means enable the cpu-core
+ "disabled" means disable the cpu-core
+
+Example:
+--------
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ status = "ok";
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ status = "ok";
+ };
+ };
--
2.7.4
\
 
 \ /
  Last update: 2018-10-12 12:05    [W:0.085 / U:0.704 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site