lkml.org 
[lkml]   [2018]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/15] Add support for OLPC XO 1.75 Embedded Controller
From
Date
On Wed, 2018-10-10 at 14:26 -0500, Rob Herring wrote:
> On Wed, Oct 10, 2018 at 12:23 PM Lubomir Rintel <lkundrak@v3.sk> wrote:
> > Hi.
> >
> > This patchset adds support for the Embedded Controller on an OLPC XO
> > 1.75 machine. OLPC XO 1.75 is a MMP2 based ARM laptop. It plugs into
> > the existing OLPC platform infrastructure, currently used by the x86
> > based models.
> >
> > The EC operates in SPI master mode, meaning the SOC is the SPI slave. It
> > uses extra handshake signal to signal readiness of SOC to accept data
> > from EC and to initiate a transaction if SOC wishes to submit data.
> >
> > The SPI slave support for MMP2 was submitted separately:
> > https://lore.kernel.org/lkml/20181010170936.316862-1-lkundrak@v3.sk/T/#t
> >
> > THe "power: supply: olpc_battery: correct the temperature" patch was
> > already sent out separately, but I'm including it because the last
> > commit of the set depends on it.
> >
> > Tested to work on an OLPC XO 1.75 and also tested not to break x86
> > support with an OLPC XO 1 machine. I don't have a XO 1.5, but it's
> > unlikely this breaks it when XO 1 works.
>
> I asked this on the OLPC devel list recently, but I don't think my
> message ever got past the moderator. Could you generate a DT dump from
> /proc/device-tree of an XO 1 and send to me? I have some DT changes
> planned and need to see if they'd be okay for x86 OLPC.

The /proc/device-tree tarball: http://v3.sk/~lkundrak/olpc/xo1.tar
(Mirror: https://people.freedesktop.org/~lkundrak/olpc/xo1.tar)

My distro's dtc crashes with this (could be related to your recent dtc
fixes), the git tip needs -f to work around some funny property names.
I figure a raw data as opposed to a dts/dtb dump would be a better
idea.

Also, there's no phandles, so it's of rather limited use. If you need
those, then I can share a dump directly from ofw instead or patch the
kernel to fabricate and expose the phandle properties.

This is with the latest firmware. I guess the exact version is
somewhere within the device tree.

>
> Rob

Cheers
Lubo

\
 
 \ /
  Last update: 2018-10-11 12:43    [W:0.371 / U:1.872 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site