lkml.org 
[lkml]   [2018]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] cxgb4: fix thermal configuration dependencies
Date
With CONFIG_THERMAL=m, we get a build error:

drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c: In function 'cxgb4_thermal_get_trip_type':
drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c:48:11: error: 'struct adapter' has no member named 'ch_thermal'

Once that is fixed by using IS_ENABLED() checks, we get a link error
against the thermal subsystem when cxgb4 is built-in:

drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_init':
cxgb4_thermal.c:(.text+0x180): undefined reference to `thermal_zone_device_register'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_remove':
cxgb4_thermal.c:(.text+0x1e0): undefined reference to `thermal_zone_device_unregister'

Finally, since CONFIG_THERMAL can be =m, the Makefile fails to pick up the
extra file into built-in.a, and we get another link failure against the
cxgb4_thermal_init/cxgb4_thermal_remove files, so the Makefile has to
be adapted as well to work for both CONFIG_THERMAL=y and =m.

Fixes: b18719157762 ("cxgb4: Add thermal zone support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/ethernet/chelsio/Kconfig | 1 +
drivers/net/ethernet/chelsio/cxgb4/Makefile | 4 +++-
drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 6 ++----
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 10 ++++------
4 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
index e2cdfa75673f..75c1c5ed2387 100644
--- a/drivers/net/ethernet/chelsio/Kconfig
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -67,6 +67,7 @@ config CHELSIO_T3
config CHELSIO_T4
tristate "Chelsio Communications T4/T5/T6 Ethernet support"
depends on PCI && (IPV6 || IPV6=n)
+ depends on THERMAL || !THERMAL
select FW_LOADER
select MDIO
select ZLIB_DEFLATE
diff --git a/drivers/net/ethernet/chelsio/cxgb4/Makefile b/drivers/net/ethernet/chelsio/cxgb4/Makefile
index 91d8a885deba..78e5d17a1d5f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/Makefile
+++ b/drivers/net/ethernet/chelsio/cxgb4/Makefile
@@ -12,4 +12,6 @@ cxgb4-objs := cxgb4_main.o l2t.o smt.o t4_hw.o sge.o clip_tbl.o cxgb4_ethtool.o
cxgb4-$(CONFIG_CHELSIO_T4_DCB) += cxgb4_dcb.o
cxgb4-$(CONFIG_CHELSIO_T4_FCOE) += cxgb4_fcoe.o
cxgb4-$(CONFIG_DEBUG_FS) += cxgb4_debugfs.o
-cxgb4-$(CONFIG_THERMAL) += cxgb4_thermal.o
+ifdef CONFIG_THERMAL
+cxgb4-objs += cxgb4_thermal.o
+endif
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 95909f0686b1..b16f4b3ef4c5 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -891,7 +891,7 @@ struct mps_encap_entry {
atomic_t refcnt;
};

-#ifdef CONFIG_THERMAL
+#if IS_ENABLED(CONFIG_THERMAL)
struct ch_thermal {
struct thermal_zone_device *tzdev;
int trip_temp;
@@ -1017,7 +1017,7 @@ struct adapter {

/* Dump buffer for collecting logs in kdump kernel */
struct vmcoredd_data vmcoredd;
-#ifdef CONFIG_THERMAL
+#if IS_ENABLED(CONFIG_THERMAL)
struct ch_thermal ch_thermal;
#endif
};
@@ -1875,9 +1875,7 @@ int t4_set_vlan_acl(struct adapter *adap, unsigned int mbox, unsigned int vf,
u16 vlan);
int cxgb4_dcb_enabled(const struct net_device *dev);

-#ifdef CONFIG_THERMAL
int cxgb4_thermal_init(struct adapter *adap);
int cxgb4_thermal_remove(struct adapter *adap);
-#endif /* CONFIG_THERMAL */

#endif /* __CXGB4_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 309f8c2226a5..05a46926016a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5863,10 +5863,9 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!is_t4(adapter->params.chip))
cxgb4_ptp_init(adapter);

-#ifdef CONFIG_THERMAL
- if (!is_t4(adapter->params.chip) && (adapter->flags & FW_OK))
+ if (IS_ENABLED(CONFIG_THERMAL) &&
+ !is_t4(adapter->params.chip) && (adapter->flags & FW_OK))
cxgb4_thermal_init(adapter);
-#endif /* CONFIG_THERMAL */

print_adapter_info(adapter);
return 0;
@@ -5933,9 +5932,8 @@ static void remove_one(struct pci_dev *pdev)

if (!is_t4(adapter->params.chip))
cxgb4_ptp_stop(adapter);
-#ifdef CONFIG_THERMAL
- cxgb4_thermal_remove(adapter);
-#endif
+ if (IS_ENABLED(CONFIG_THERMAL))
+ cxgb4_thermal_remove(adapter);

/* If we allocated filters, free up state associated with any
* valid filters ...
--
2.18.0
\
 
 \ /
  Last update: 2018-10-11 10:59    [W:0.059 / U:3.164 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site