lkml.org 
[lkml]   [2018]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 5/5] RISC-V: Implement sparsemem
From
On Fri, 05 Oct 2018 09:16:42 PDT (-0700), logang@deltatee.com wrote:
> This patch implements sparsemem support for risc-v which helps pave the
> way for memory hotplug and eventually P2P support.
>
> We introduce Kconfig options for virtual and physical address bits which
> are used to calculate the size of the vmemmap and set the
> MAX_PHYSMEM_BITS.
>
> The vmemmap is located directly before the VMALLOC region and sized
> such that we can allocate enough pages to populate all the virtual
> address space in the system (similar to the way it's done in arm64).
>
> During initialization, call memblocks_present() and sparse_init(),
> and provide a stub for vmemmap_populate() (all of which is similar to
> arm64).
>
> Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
> Cc: Palmer Dabbelt <palmer@sifive.com>
> Cc: Albert Ou <aou@eecs.berkeley.edu>
> Cc: Andrew Waterman <andrew@sifive.com>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Michael Clark <michaeljclark@mac.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Zong Li <zong@andestech.com>
> ---
> arch/riscv/Kconfig | 23 +++++++++++++++++++++++
> arch/riscv/include/asm/pgtable.h | 24 ++++++++++++++++++++----
> arch/riscv/include/asm/sparsemem.h | 11 +++++++++++
> arch/riscv/kernel/setup.c | 4 +++-
> arch/riscv/mm/init.c | 8 ++++++++
> 5 files changed, 65 insertions(+), 5 deletions(-)
> create mode 100644 arch/riscv/include/asm/sparsemem.h

I don't really know anything about this, but you're welcome to add a

Reviewed-by: Palmer Dabbelt <palmer@sifive.com>

if you think it'll help. I'm assuming you're targeting a different tree for
the patch set, in which case it's probably best to keep this together with the
rest of it.

Thanks for porting your stuff to RISC-V!

> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index a344980287a5..a1b5d758a542 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -52,12 +52,32 @@ config ZONE_DMA32
> bool
> default y if 64BIT
>
> +config VA_BITS
> + int
> + default 32 if 32BIT
> + default 39 if 64BIT
> +
> +config PA_BITS
> + int
> + default 34 if 32BIT
> + default 56 if 64BIT
> +
> config PAGE_OFFSET
> hex
> default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
> default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
> default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
>
> +config ARCH_FLATMEM_ENABLE
> + def_bool y
> +
> +config ARCH_SPARSEMEM_ENABLE
> + def_bool y
> + select SPARSEMEM_VMEMMAP_ENABLE
> +
> +config ARCH_SELECT_MEMORY_MODEL
> + def_bool ARCH_SPARSEMEM_ENABLE
> +
> config STACKTRACE_SUPPORT
> def_bool y
>
> @@ -92,6 +112,9 @@ config PGTABLE_LEVELS
> config HAVE_KPROBES
> def_bool n
>
> +config HAVE_ARCH_PFN_VALID
> + def_bool y
> +
> menu "Platform type"
>
> choice
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index 16301966d65b..20c49cded686 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -89,6 +89,26 @@ extern pgd_t swapper_pg_dir[];
> #define __S110 PAGE_SHARED_EXEC
> #define __S111 PAGE_SHARED_EXEC
>
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +/*
> + * Log2 of the upper bound of the size of a struct page. Used for sizing
> + * the vmemmap region only, does not affect actual memory footprint.
> + * We don't use sizeof(struct page) directly since taking its size here
> + * requires its definition to be available at this point in the inclusion
> + * chain, and it may not be a power of 2 in the first place.
> + */
> +#define STRUCT_PAGE_MAX_SHIFT 6
> +
> +#define VMEMMAP_SIZE (UL(1) << (CONFIG_VA_BITS - PAGE_SHIFT - 1 + \
> + STRUCT_PAGE_MAX_SHIFT))
> +#define VMEMMAP_END (VMALLOC_START - 1)
> +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> +
> +#define vmemmap ((struct page *)VMEMMAP_START)
> +
> /*
> * ZERO_PAGE is a global shared page that is always zero,
> * used for zero-mapped memory areas, etc.
> @@ -411,10 +431,6 @@ static inline void pgtable_cache_init(void)
> /* No page table caches to initialize */
> }
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> -
> /*
> * Task size is 0x40000000000 for RV64 or 0xb800000 for RV32.
> * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
> diff --git a/arch/riscv/include/asm/sparsemem.h b/arch/riscv/include/asm/sparsemem.h
> new file mode 100644
> index 000000000000..4563e806c788
> --- /dev/null
> +++ b/arch/riscv/include/asm/sparsemem.h
> @@ -0,0 +1,11 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __ASM_SPARSEMEM_H
> +#define __ASM_SPARSEMEM_H
> +
> +#ifdef CONFIG_SPARSEMEM
> +#define MAX_PHYSMEM_BITS CONFIG_PA_BITS
> +#define SECTION_SIZE_BITS 30
> +#endif
> +
> +#endif
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index aee603123030..89fa781a9bf8 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -205,6 +205,9 @@ static void __init setup_bootmem(void)
> PFN_PHYS(end_pfn - start_pfn),
> &memblock.memory, 0);
> }
> +
> + memblocks_present();
> + sparse_init();
> }
>
> void __init setup_arch(char **cmdline_p)
> @@ -239,4 +242,3 @@ void __init setup_arch(char **cmdline_p)
>
> riscv_fill_hwcap();
> }
> -
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 58a522f9bcc3..5d529878667c 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -70,3 +70,11 @@ void free_initrd_mem(unsigned long start, unsigned long end)
> {
> }
> #endif /* CONFIG_BLK_DEV_INITRD */
> +
> +#ifdef CONFIG_SPARSEMEM
> +int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
> + struct vmem_altmap *altmap)
> +{
> + return vmemmap_populate_basepages(start, end, node);
> +}
> +#endif

\
 
 \ /
  Last update: 2018-10-11 02:27    [W:0.149 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site