lkml.org 
[lkml]   [2018]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] net/ncsi: Add NCSI Broadcom OEM command
From
Date
On Tue, 2018-10-09 at 10:48 -0700, Vijay Khemka wrote:
> This patch adds OEM Broadcom commands and response handling. It also
> defines OEM Get MAC Address handler to get and configure the device.
>
> ncsi_oem_gma_handler_bcm: This handler send NCSI broadcom command for
> getting mac address.
> ncsi_rsp_handler_oem_bcm: This handles response received for all
> broadcom OEM commands.
> ncsi_rsp_handler_oem_bcm_gma: This handles get mac address response and
> set it to device.
>
> Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
> ---
> net/ncsi/Kconfig | 6 ++++
> net/ncsi/internal.h | 8 +++++
> net/ncsi/ncsi-manage.c | 70 +++++++++++++++++++++++++++++++++++++++++-
> net/ncsi/ncsi-pkt.h | 8 +++++
> net/ncsi/ncsi-rsp.c | 40 +++++++++++++++++++++++-
> 5 files changed, 130 insertions(+), 2 deletions(-)
>

<snip>

> static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
> {
> struct ncsi_dev *nd = &ndp->ndev;
> @@ -643,9 +676,10 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
> struct ncsi_channel *nc = ndp->active_channel;
> struct ncsi_channel *hot_nc = NULL;
> struct ncsi_cmd_arg nca;
> + struct ncsi_oem_gma_handler *nch = NULL;
> unsigned char index;
> unsigned long flags;
> - int ret;
> + int ret, i;
>

I just noticed that if CONFIG_NCSI_OEM_CMD_GET_MAC is not set then this
generates unused variable warnings for i and nch. Otherwise all looking good!

Regards,
Sam


\
 
 \ /
  Last update: 2018-10-10 06:40    [W:0.087 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site