lkml.org 
[lkml]   [2018]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] usb: gadget: uvc: allow ioctl to send response in status stage
Date
We now have a mechanism to signal the UDC driver to reply to a control
OUT request with STALL or ACK, and we have packaged the setup stage data
and the data stage data of a control OUT request into a single
UVC_EVENT_DATA for userspace to consume. The ioctl UVCIOC_SEND_RESPONSE
in the case of a control OUT request sends a response to the data stage,
and so the ioctl now notifies the UDC driver to reply with STALL or ACK.
In the case of a control IN request, the ioctl sends the UVC data as
before.

Also tell the UDC to delay the status stage for this to work.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
---
drivers/usb/gadget/function/f_uvc.c | 5 +++--
drivers/usb/gadget/function/uvc_v4l2.c | 20 +++++++++++++++++---
drivers/usb/gadget/udc/core.c | 5 +++++
3 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 9df3eac440ea..ff89a76a7417 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -209,14 +209,15 @@ uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req)
struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;

if (uvc->event_setup_out) {
- uvc->event_setup_out = 0;
-
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_DATA;
uvc_event->data.length = req->actual;
memcpy(&uvc_event->data.data, req->buf, req->actual);
memcpy(&uvc_event->data.setup, &uvc->control_setup,
sizeof(uvc_event->data.setup));
+
+ usb_ep_delay_status(ep);
+
v4l2_event_queue(&uvc->vdev, &v4l2_event);
}
}
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index 2e2251bdef03..caa6412c0bda 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -37,10 +37,24 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)

/*
* For control OUT transfers the request has been enqueued synchronously
- * by the setup handler, there's nothing to be done here.
+ * by the setup handler, we just need to tell the UDC whether to ACK or
+ * STALL the control transfer.
*/
- if (uvc->event_setup_out)
- return 0;
+ if (uvc->event_setup_out) {
+ struct usb_ep *ep = cdev->gadget->ep0;
+ bool stall = data->length < 0;
+
+ /*
+ * The length field carries the control request status.
+ * Negative values signal a STALL and zero values an ACK.
+ * Positive values are not valid as there is no data to send
+ * back in the status stage.
+ */
+ if (data->length > 0)
+ return -EINVAL;
+
+ return usb_ep_send_response(ep, stall);
+ }

if (data->length < 0)
return usb_ep_set_halt(cdev->gadget->ep0);
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 1ec5ce6b43cd..0f62a3f1aa29 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1369,6 +1369,11 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
driver->function);

+ if (!udc->gadget->ep0->ops->send_response) {
+ dev_warn(&udc->dev, "UDC doesn't implement send_response\n");
+ dev_warn(&udc->dev, "Proper operation can't be guaranteed\n");
+ }
+
udc->driver = driver;
udc->dev.driver = &driver->driver;
udc->gadget->dev.driver = &driver->driver;
--
2.18.0
\
 
 \ /
  Last update: 2018-10-10 04:50    [W:0.144 / U:4.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site