lkml.org 
[lkml]   [2018]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/boot] x86/kconfig: Remove residual "no-hlt" boot parameter reference
Commit-ID:  9e7a0bc0a315f3c2a6902e04b60a86edd78c1164
Gitweb: https://git.kernel.org/tip/9e7a0bc0a315f3c2a6902e04b60a86edd78c1164
Author: zhenwei.pi <zhenwei.pi@youruncloud.com>
AuthorDate: Mon, 25 Dec 2017 10:56:31 +0800
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Mon, 8 Jan 2018 20:09:25 +0100

x86/kconfig: Remove residual "no-hlt" boot parameter reference

The "no-hlt" boot parameter has been removed ~5 years ago:

27be45700021 ("x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag")

Remove a stale reference from the documentation as well.

Signed-off-by: zhenwei.pi <zhenwei.pi@youruncloud.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1514170591-25120-1-git-send-email-zhenwei.pi@youruncloud.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/Kconfig | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8eed3f9..cf49280 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2425,19 +2425,18 @@ menuconfig APM

1) make sure that you have enough swap space and that it is
enabled.
- 2) pass the "no-hlt" option to the kernel
- 3) switch on floating point emulation in the kernel and pass
+ 2) switch on floating point emulation in the kernel and pass
the "no387" option to the kernel
- 4) pass the "floppy=nodma" option to the kernel
- 5) pass the "mem=4M" option to the kernel (thereby disabling
+ 3) pass the "floppy=nodma" option to the kernel
+ 4) pass the "mem=4M" option to the kernel (thereby disabling
all but the first 4 MB of RAM)
- 6) make sure that the CPU is not over clocked.
- 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
- 8) disable the cache from your BIOS settings
- 9) install a fan for the video card or exchange video RAM
- 10) install a better fan for the CPU
- 11) exchange RAM chips
- 12) exchange the motherboard.
+ 5) make sure that the CPU is not over clocked.
+ 6) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
+ 7) disable the cache from your BIOS settings
+ 8) install a fan for the video card or exchange video RAM
+ 9) install a better fan for the CPU
+ 10) exchange RAM chips
+ 11) exchange the motherboard.

To compile this driver as a module, choose M here: the
module will be called apm.
\
 
 \ /
  Last update: 2018-01-14 23:18    [W:0.441 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site