lkml.org 
[lkml]   [2018]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] phy: work around 'phys' references to usb-phy devices
From
Date
Hi Arnd,

On Monday 08 January 2018 06:31 PM, Arnd Bergmann wrote:
> Stefan Wahren reports a problem with a warning fix that was merged
> for v4.15: we had lots of device nodes with a 'phys' property pointing
> to a device node that is not compliant with the binding documented in
> Documentation/devicetree/bindings/phy/phy-bindings.txt
>
> This generally works because USB HCD drivers that support both the generic
> phy subsystem and the older usb-phy subsystem ignore most errors from
> phy_get() and related calls and then use the usb-phy driver instead.
>
> However, usb_add_hcd() (along with the respective functions in dwc2 and
> dwc3) propagate the EPROBE_DEFER return code so we can try again whenever
> the driver gets loaded. In case the driver is written for the usb-phy
> subsystem (like usb-generic-phy aka usb-nop-xceiv), we will never load
> a generic-phy driver for it, and keep failing here.
>
> There is only a small number of remaining usb-phy drivers that support
> device tree, so this adds a workaround by providing a full list of the
> potentially affected drivers, and always failing the probe with -ENODEV
> here, which is the same behavior that we used to get with incorrect
> device tree files. Since we generally want older kernels to also want
> to work with the fixed devicetree files, it would be good to backport
> the patch into stable kernels as well (3.13+ are possibly affected).
> Reverting back to the DTS sources that work would in theory fix USB
> support for now, but in the long run we'd run into the same problem
> again when the drivers get ported from usb-phy to generic-phy.
>
> Fixes: 014d6da6cb25 ("ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells")
> Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2
> Cc: stable@vger.kernel.org
> Cc: Stefan Wahren <stefan.wahren@i2se.com>
> Cc: Felipe Balbi <balbi@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> This obviously needs to be tested, I wrote this up as a reply to
> Stefan's bug report. I'm fairly sure that I covered all usb-phy
> driver strings here. My goal is to have a fix merged into 4.15
> rather than reverting all the DT fixes.

Shouldn't the fix be in phy consumer drivers to not return error if it's able
to find the phy either using usb-phy or generic phy?
> ---
> drivers/phy/phy-core.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index b4964b067aec..bb4dd2a2de2d 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -387,6 +387,24 @@ int phy_calibrate(struct phy *phy)
> }
> EXPORT_SYMBOL_GPL(phy_calibrate);
>
> +static struct of_device_id __maybe_unused legacy_usbphy[] = {
> + { .compatible = "fsl,imx23-usbphy" },
> + { .compatible = "fsl,imx6q-usbphy" },
> + { .compatible = "fsl,imx6sl-usbphy" },
> + { .compatible = "fsl,imx6sx-usbphy" },
> + { .compatible = "fsl,imx6ul-usbphy" },
> + { .compatible = "fsl,vf610-usbphy" },
> + { .compatible = "nvidia,tegra20-usb-phy" },
> + { .compatible = "nvidia,tegra30-usb-phy" },
> + { .compatible = "nxp,isp1301" },
> + { .compatible = "ti,am335x-usb-ctrl-module" },
> + { .compatible = "ti,am335x-usb-phy" },
> + { .compatible = "ti,keystone-usbphy" },
> + { .compatible = "ti,twl6030-usb" },
> + { .compatible = "usb-nop-xceiv" },
> + {},

"ti,am335x-usb-ctrl-module" and "ti,twl6030-usb" are not phys.

Thanks
Kishon

\
 
 \ /
  Last update: 2018-01-14 23:18    [W:0.154 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site