lkml.org 
[lkml]   [2018]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:timers/core] clocksource/drivers/stm32: Start the timer's counter sooner
Commit-ID:  103bb56a2831bfc7f2d442da9e47f89f37d34952
Gitweb: https://git.kernel.org/tip/103bb56a2831bfc7f2d442da9e47f89f37d34952
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
AuthorDate: Mon, 8 Jan 2018 14:28:59 +0100
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Mon, 8 Jan 2018 17:57:26 +0100

clocksource/drivers/stm32: Start the timer's counter sooner

As we have a lot of timers on this platform, we can have potentially all the
timers enabled in the DT, so we don't want to start the timer for every probe
otherwise they will be running for nothing as only one will be used.

Start the timer only when setting the mode or when the clocksource is
enabled.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-20-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
drivers/clocksource/timer-stm32.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index c7d1dae..e5cdc3a 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -101,7 +101,15 @@ static void stm32_clock_event_disable(struct timer_of *to)
writel_relaxed(0, timer_of_base(to) + TIM_DIER);
}

-static void stm32_clock_event_enable(struct timer_of *to)
+/**
+ * stm32_timer_start - Start the counter without event
+ * @to: a timer_of structure pointer
+ *
+ * Start the timer in order to have the counter reset and start
+ * incrementing but disable interrupt event when there is a counter
+ * overflow. By default, the counter direction is used as upcounter.
+ */
+static void stm32_timer_start(struct timer_of *to)
{
writel_relaxed(TIM_CR1_UDIS | TIM_CR1_CEN, timer_of_base(to) + TIM_CR1);
}
@@ -137,7 +145,7 @@ static int stm32_clock_event_set_periodic(struct clock_event_device *clkevt)
{
struct timer_of *to = to_timer_of(clkevt);

- stm32_clock_event_enable(to);
+ stm32_timer_start(to);

return stm32_clock_event_set_next_event(timer_of_period(to), clkevt);
}
@@ -146,7 +154,7 @@ static int stm32_clock_event_set_oneshot(struct clock_event_device *clkevt)
{
struct timer_of *to = to_timer_of(clkevt);

- stm32_clock_event_enable(to);
+ stm32_timer_start(to);

return 0;
}
@@ -235,6 +243,13 @@ static int __init stm32_clocksource_init(struct timer_of *to)
* sched_clock.
*/
if (bits == 32 && !stm32_timer_cnt) {
+
+ /*
+ * Start immediately the counter as we will be using
+ * it right after.
+ */
+ stm32_timer_start(to);
+
stm32_timer_cnt = timer_of_base(to) + TIM_CNT;
sched_clock_register(stm32_read_sched_clock, bits, timer_of_rate(to));
pr_info("%s: STM32 sched_clock registered\n", name);
\
 
 \ /
  Last update: 2018-01-14 23:18    [W:1.718 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site