lkml.org 
[lkml]   [2018]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: r8169 take too long to complete driver initialization
On Wed, Dec 20, 2017 at 4:41 PM, Chris Chiu <chiu@endlessm.com> wrote:
> Hi,
> We've hit a suspend/resume issue on a Acer desktop caused by r8169
> driver. The dmseg
> https://gist.github.com/mschiu77/b741849b5070281daaead8dfee312d1a
> shows it's still in msleep() within a mutex lock.
> After looking into the code, it's caused by the
> rtl8168ep_stop_cmac() which is waiting 100 seconds for
> rtl_ocp_tx_cond. The following dmesg states that the r8169 driver is
> loaded.
>
> [ 20.270526] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>
> But it takes > 100 seconds to get the following messages
>
> [ 140.400223] r8169 0000:02:00.0 (unnamed net_device)
> (uninitialized): rtl_ocp_tx_cond == 1 (loop: 2000, delay: 50).
> [ 140.413294] r8169 0000:02:00.0 eth0: RTL8168ep/8111ep at
> 0xffffb16c80db1000, f8:0f:41:ea:74:0d, XID 10200800 IRQ 46
> [ 140.413297] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200
> bytes, tx checksumming: ko]
>
> So any trial to suspend the machine during this period would always
> get device/resource busy message then abort. Is this rtl_ocp_tx_cond
> necessary? Because the ethernet is still working and I don't see any
> problem. I don't know it should be considered normal or not. Please
> let me know if any more information required. Thanks
>
> Chris

gentle ping,

cheers.

\
 
 \ /
  Last update: 2018-01-05 03:18    [W:0.062 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site