lkml.org 
[lkml]   [2018]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/9] PCI: Add support to the Cadence PCIe controller
From
Date
Hi Kishon,

Le 03/01/2018 à 10:14, Kishon Vijay Abraham I a écrit :
> Hi,
>
> On Saturday 30 December 2017 02:23 AM, Cyrille Pitchen wrote:
>> Hi Kishon,
>>
>> Le 28/12/2017 à 14:00, Kishon Vijay Abraham I a écrit :
>>> Hi Cyrille,
>>>
>>> On Monday 18 December 2017 11:46 PM, Cyrille Pitchen wrote:
>>>> Hi all,
>>>>
>>>> this series of patches adds support to the Cadence PCIe controller.
>>>> It was tested on a ARM64 platform emulated by a Palladium running the
>>>> pci-next kernel.
>>>>
>>>> The host mode was tested with some PCIe devices connected to the Palladium
>>>> through a speed-bridge. Some of those devices were a USB host controller
>>>> and a SATA controller. The PCIe host controller was also tested with a
>>>> second controller configured in endpoint mode and connected back to back
>>>> to the first controller.
>>>>
>>>> The EndPoint Controller (EPC) driver of this series was tested with the
>>>> pci-epf-test.c EndPoint Function (EPF) driver and the pcitest userspace
>>>> program.
>>>
>>> Did you get to test multi function EP?
>>>
>>
>> No I didn't: I tested only with a single function to check for regression
>> but currently I'm not able to test with multiple functions.
>>
>> With devmem, I've tried to read then write the Physical Function Configuration
>> Register (offset 0x2c0 in the Local Management registers) to enable
>> functions other than function 0.
>>
>> This is the CDNS_PCIE_LM_EP_FUNC_CFG register that the pcie-cadence_ep.c
>> driver updates in cdns_pcie_ep_write_header() since v2 of the series.
>>
>> As written in the datasheet, BIT(0) is actually hard-wired to 1, hence
>> function 0 can't be disabled: that makes sense. However other function
>> enable bits were read as 0 whereas the datasheet claims they should be set
>> at power up. Besides, I can't set any of them with devmem.
>>
>> Actually, I have 2 slightly different datasheets, in the first one I should
>> have 4 functions but only 2 based on the second datasheet.
>>
>> Then I guess it's a design parameter used when synthesizing the controller.
>>
>> So I've asked Cadence whether I've missed or misunderstood something in the
>> datasheets or whether the IP they provided me with has a single function
>> for now. I'm waiting for their answers.
>
> hmm.. It would be nice to have multi function tested since it would both
> validate multi function support of PCI EP core and the cadence multi-function
> itself.
>

I will work with Cadence so we try to make it work.

Best regards,

Cyrille


> Thanks
> Kishon
>


--
Cyrille Pitchen, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2018-01-03 22:23    [W:0.134 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site