lkml.org 
[lkml]   [2018]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 9/9] ASoC: Intel: kconfig: add some comments for if symbols
From
Date


On 01/03/2018 01:25 PM, Randy Dunlap wrote:
> On 01/03/2018 08:50 AM, Pierre-Louis Bossart wrote:
>> From: Vinod Koul <vinod.koul@intel.com>
>>
>> Helps in finding if endings
> That partial sentence is confusing. I couldn't decode it without
> reading the entire patch. That shouldn't be necessary.
>
> How about:
>
> Help in finding (matching) if/endif pairs.
> or
> Help in finding matching "if" endings by commenting the "endif".
yes indeed, i'll use the second suggestion.
I also screwed-up and squashed two patches from Vinod so the commit
message isn't fully aligned with the contents of the patch. Gah.

>
>> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
>> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
>> ---
>> sound/soc/intel/Kconfig | 10 ++++----
>> sound/soc/intel/boards/Kconfig | 52 +++++++++++++++++++++---------------------
>> 2 files changed, 31 insertions(+), 31 deletions(-)
>>
>> diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
>> index b75fa5f59b96..801b205662df 100644
>> --- a/sound/soc/intel/Kconfig
>> +++ b/sound/soc/intel/Kconfig
>> @@ -47,7 +47,7 @@ config SND_SOC_INTEL_SST_FIRMWARE
>> # when these platforms are enabled
>>
>> config SND_SOC_INTEL_HASWELL
>> - tristate "Intel ASoC SST driver for Haswell/Broadwell"
>> + tristate "Haswell/Broadwell Platforms"
>> depends on SND_DMA_SGBUF
>> depends on DMADEVICES && ACPI
>> select SND_SOC_INTEL_SST
>> @@ -60,7 +60,7 @@ config SND_SOC_INTEL_HASWELL
>> typically used for Chromebooks. This is a recommended option.
>>
>> config SND_SOC_INTEL_BAYTRAIL
>> - tristate "Intel ASoC SST driver for Baytrail (legacy)"
>> + tristate "Baytrail (legacy) Platforms"
>> depends on DMADEVICES && ACPI
>> select SND_SOC_INTEL_SST
>> select SND_SOC_INTEL_SST_ACPI
>> @@ -73,7 +73,7 @@ config SND_SOC_INTEL_BAYTRAIL
>> not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
>>
>> config SND_SST_ATOM_HIFI2_PLATFORM_PCI
>> - tristate "Intel ASoC SST driver for PCI HiFi2 platforms (Medfield, Merrifield)"
>> + tristate "PCI HiFi2 platforms (Medfield, Merrifield) platforms"
>> depends on X86 && PCI
>> select SND_SST_IPC_PCI
>> select SND_SOC_COMPRESS
>> @@ -87,7 +87,7 @@ config SND_SST_ATOM_HIFI2_PLATFORM_PCI
>> is not in the standard firmware tree
>>
>> config SND_SST_ATOM_HIFI2_PLATFORM
>> - tristate "Intel ASoC SST driver for ACPI HiFi2 platforms (Baytrail, Cherrytrail)"
>> + tristate "ACPI HiFi2 platforms (Baytrail, Cherrytrail) Platforms"
>> depends on X86 && ACPI
>> select SND_SST_IPC_ACPI
>> select IOSF_MBI
>> @@ -99,7 +99,7 @@ config SND_SST_ATOM_HIFI2_PLATFORM
>> recommended option
>>
>> config SND_SOC_INTEL_SKYLAKE
>> - tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL"
>> + tristate "SKL/BXT/KBL/GLK/CNL... Platforms"
>> depends on PCI && ACPI
>> select SND_HDA_EXT_CORE
>> select SND_HDA_DSP_LOADER
>> diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
>> index 6a10df882a88..89a73e3d9d2d 100644
>> --- a/sound/soc/intel/boards/Kconfig
>> +++ b/sound/soc/intel/boards/Kconfig
>> @@ -15,7 +15,7 @@ if SND_SOC_INTEL_MACH
>> if SND_SST_ATOM_HIFI2_PLATFORM_PCI
>>
>> config SND_MFLD_MACHINE
>> - tristate "SOC Machine Audio driver for Intel Medfield MID platform"
>> + tristate "Intel Medfield MID"
>> depends on INTEL_SCU_IPC
>> select SND_SOC_SN95031
>> help
>> @@ -24,12 +24,12 @@ config SND_MFLD_MACHINE
>> Say Y if you have such a device.
>> If unsure select "N".
>>
>> -endif
>> +endif ## SND_SST_ATOM_HIFI2_PLATFORM_PCI
>>
>> if SND_SOC_INTEL_HASWELL
>>
>> config SND_SOC_INTEL_HASWELL_MACH
>> - tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
>> + tristate "Haswell Lynxpoint"
>> depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
>> select SND_SOC_RT5640
>> help
>> @@ -39,7 +39,7 @@ config SND_SOC_INTEL_HASWELL_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BDW_RT5677_MACH
>> - tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
>> + tristate "Broadwell with RT5677 codec"
>> depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB
>> select SND_SOC_RT5677
>> help
>> @@ -49,7 +49,7 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BROADWELL_MACH
>> - tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
>> + tristate "Intel Broadwell Wildcatpoint"
>> depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
>> select SND_SOC_RT286
>> help
>> @@ -57,12 +57,12 @@ config SND_SOC_INTEL_BROADWELL_MACH
>> Ultrabook platforms.
>> Say Y or m if you have such a device. This is a recommended option.
>> If unsure select "N".
>> -endif
>> +endif ## SND_SOC_INTEL_HASWELL
>>
>> if SND_SOC_INTEL_BAYTRAIL
>>
>> config SND_SOC_INTEL_BYT_MAX98090_MACH
>> - tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
>> + tristate "Baytrail with MAX98090 codec"
>> depends on X86_INTEL_LPSS && I2C
>> select SND_SOC_MAX98090
>> help
>> @@ -72,7 +72,7 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
>> functionality.
>>
>> config SND_SOC_INTEL_BYT_RT5640_MACH
>> - tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
>> + tristate "Baytrail with RT5640 codec"
>> depends on X86_INTEL_LPSS && I2C
>> select SND_SOC_RT5640
>> help
>> @@ -80,12 +80,12 @@ config SND_SOC_INTEL_BYT_RT5640_MACH
>> with the RT5640 audio codec. This driver is deprecated, use
>> SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality.
>>
>> -endif
>> +endif ## SND_SOC_INTEL_BAYTRAIL
>>
>> if SND_SST_ATOM_HIFI2_PLATFORM
>>
>> config SND_SOC_INTEL_BYTCR_RT5640_MACH
>> - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec"
>> + tristate "Baytrail and Baytrail-CR with RT5640 codec"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_ACPI
>> select SND_SOC_RT5640
>> @@ -96,7 +96,7 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BYTCR_RT5651_MACH
>> - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
>> + tristate "Baytrail and Baytrail-CR with RT5651 codec"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_ACPI
>> select SND_SOC_RT5651
>> @@ -107,7 +107,7 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
>> - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
>> + tristate "Cherrytrail & Braswell with RT5672 codec"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_ACPI
>> select SND_SOC_RT5670
>> @@ -118,7 +118,7 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
>> - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec"
>> + tristate "Cherrytrail & Braswell with RT5645/5650 codec"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_ACPI
>> select SND_SOC_RT5645
>> @@ -129,7 +129,7 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
>> - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec"
>> + tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_MAX98090
>> select SND_SOC_TS3A227E
>> @@ -140,7 +140,7 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
>> - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec"
>> + tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_ACPI
>> select SND_SOC_DA7213
>> @@ -151,7 +151,7 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
>> - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec"
>> + tristate "Baytrail & Cherrytrail with ES8316 codec"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_ES8316
>> help
>> @@ -161,7 +161,7 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
>> - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
>> + tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
>> depends on X86_INTEL_LPSS && I2C && ACPI
>> help
>> This adds support for ASoC machine driver for the MinnowBoard Max or
>> @@ -172,12 +172,12 @@ config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
>>
>> If unsure select "N".
>>
>> -endif
>> +endif ## SND_SST_ATOM_HIFI2_PLATFORM
>>
>> if SND_SOC_INTEL_SKYLAKE
>>
>> config SND_SOC_INTEL_SKL_RT286_MACH
>> - tristate "ASoC Audio driver for SKL with RT286 I2S mode"
>> + tristate "SKL with RT286 I2S mode"
>> depends on MFD_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_RT286
>> select SND_SOC_DMIC
>> @@ -189,7 +189,7 @@ config SND_SOC_INTEL_SKL_RT286_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
>> - tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode"
>> + tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
>> depends on MFD_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_NAU8825
>> select SND_SOC_SSM4567
>> @@ -202,7 +202,7 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
>> - tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode"
>> + tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
>> depends on MFD_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_NAU8825
>> select SND_SOC_MAX98357A
>> @@ -215,7 +215,7 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
>> - tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode"
>> + tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
>> depends on MFD_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_DA7219
>> select SND_SOC_MAX98357A
>> @@ -229,7 +229,7 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_BXT_RT298_MACH
>> - tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
>> + tristate "Broxton with RT298 I2S mode"
>> depends on MFD_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_RT298
>> select SND_SOC_DMIC
>> @@ -242,7 +242,7 @@ config SND_SOC_INTEL_BXT_RT298_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
>> - tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode"
>> + tristate "KBL with RT5663 and MAX98927 in I2S Mode"
>> depends on MFD_INTEL_LPSS && I2C && ACPI
>> select SND_SOC_RT5663
>> select SND_SOC_MAX98927
>> @@ -255,7 +255,7 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
>> If unsure select "N".
>>
>> config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
>> - tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
>> + tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
>> depends on MFD_INTEL_LPSS && I2C && SPI && ACPI
>> select SND_SOC_RT5663
>> select SND_SOC_RT5514
>> @@ -267,6 +267,6 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
>> create an alsa sound card for RT5663 + RT5514 + MAX98927.
>> Say Y or m if you have such a device. This is a recommended option.
>> If unsure select "N".
>> -endif
>> +endif ## SND_SOC_INTEL_SKYLAKE
>>
>> endif ## SND_SOC_INTEL_MACH
>>
>

\
 
 \ /
  Last update: 2018-01-03 20:52    [W:1.410 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site