lkml.org 
[lkml]   [2018]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
From
Date


On 29.01.2018 10:52, Maxime Ripard wrote:
> On Mon, Jan 29, 2018 at 12:29:17AM +0100, Philipp Rossak wrote:
>> This patch enables the the sid controller in the H3. It can be used
>> for thermal calibration data.
>>
>> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
>> ---
>> arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
>> index 3f83f6a27c74..9bb5cc29fec5 100644
>> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
>> @@ -72,6 +72,13 @@
>> };
>> };
>>
>> + soc {
>> + sid: eeprom@1c14000 {
>> + compatible = "allwinner,sun8i-h3-sid";
>> + reg = <0x01c14000 0x400>;
>> + };
>> + };
>> +
>
> Shouldn't you also use a nvmem-cells property to the THS node?
>
> Maxime
>

Oh seems like I forgot that.
As related to the wiki [1] this should be 64 bit wide at the address
0x34. I will add that in the next version.


[1]: http://linux-sunxi.org/SID_Register_Guide#eFUSE

Thanks,
Philipp

\
 
 \ /
  Last update: 2018-01-29 13:04    [W:0.233 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site