lkml.org 
[lkml]   [2018]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 07/16] iio: adc: axp20x_adc: add support for AXP813 ADC
On Mon, 22 Jan 2018 09:22:25 +0100
Quentin Schulz <quentin.schulz@free-electrons.com> wrote:

> Hi Jonathan,
>
> On Sun, Jan 21, 2018 at 12:26:55PM +0000, Jonathan Cameron wrote:
> > On Mon, 15 Jan 2018 11:33:41 +0100
> > Quentin Schulz <quentin.schulz@free-electrons.com> wrote:
> >
> > > The X-Powers AXP813 PMIC is really close to what is already done for
> > > AXP20X/AXP22X.
> > >
> > > There are two pairs of bits to set the rate (one for Voltage and Current
> > > measurements and one for TS/GPIO0 voltage measurements) instead of one.
> > >
> > > The register to set the ADC rates is different from the one for
> > > AXP20X/AXP22X.
> > >
> > > GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X.
> > >
> > > The scales to apply to the different inputs are unlike the ones from
> > > AXP20X and AXP22X.
> > >
> > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> > > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > Applied to the togreg branch of iio.git and pushed out as testing
> > for the autobuilders to play with it.
> >
> > One thing that might be nice to tidy up in this driver though.
> >
> > CHECK drivers/iio/adc/axp20x_adc.c
> > drivers/iio/adc/axp20x_adc.c:548:26: warning: dubious: !x & y
> > drivers/iio/adc/axp20x_adc.c:553:26: warning: dubious: !x & y
> >
> > Those are 'interesting' code constructions. It may be worth being
> > a little more verbose to keep sparse happy and suppress the
> > warning.
> >
>
> Would adding a val = !!val; before the call to the macro be "verbose"
> enough for you?
>
> Sparse does not complain anymore after that.
I'd just use a good old fashioned if statement. Few more lines of
code but clearer and will keep sparse happy.

Jonathan

>
> Thanks,
> Quentin
>
> > Thanks,
> >
> > Jonathan
> >
> > > ---
> > > drivers/iio/adc/axp20x_adc.c | 123 ++++++++++++++++++++++++++++++++++++-
> > > include/linux/mfd/axp20x.h | 2 +-
> > > 2 files changed, 125 insertions(+)
> > >
> > > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> > > index 3968053..7cdb8bc 100644
> > > --- a/drivers/iio/adc/axp20x_adc.c
> > > +++ b/drivers/iio/adc/axp20x_adc.c
> > > @@ -35,8 +35,13 @@
> > > #define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
> > >
> > > #define AXP20X_ADC_RATE_MASK GENMASK(7, 6)
> > > +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4)
> > > +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
> > > #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
> > > #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
> > > +#define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x)
> > > +#define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
> > > +#define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
> > >
> > > #define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \
> > > { \
> > > @@ -95,6 +100,12 @@ enum axp22x_adc_channel_i {
> > > AXP22X_BATT_DISCHRG_I,
> > > };
> > >
> > > +enum axp813_adc_channel_v {
> > > + AXP813_TS_IN = 0,
> > > + AXP813_GPIO0_V,
> > > + AXP813_BATT_V,
> > > +};
> > > +
> > > static struct iio_map axp20x_maps[] = {
> > > {
> > > .consumer_dev_name = "axp20x-usb-power-supply",
> > > @@ -197,6 +208,25 @@ static const struct iio_chan_spec axp22x_adc_channels[] = {
> > > AXP20X_BATT_DISCHRG_I_H),
> > > };
> > >
> > > +static const struct iio_chan_spec axp813_adc_channels[] = {
> > > + {
> > > + .type = IIO_TEMP,
> > > + .address = AXP22X_PMIC_TEMP_H,
> > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > > + BIT(IIO_CHAN_INFO_SCALE) |
> > > + BIT(IIO_CHAN_INFO_OFFSET),
> > > + .datasheet_name = "pmic_temp",
> > > + },
> > > + AXP20X_ADC_CHANNEL(AXP813_GPIO0_V, "gpio0_v", IIO_VOLTAGE,
> > > + AXP288_GP_ADC_H),
> > > + AXP20X_ADC_CHANNEL(AXP813_BATT_V, "batt_v", IIO_VOLTAGE,
> > > + AXP20X_BATT_V_H),
> > > + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> > > + AXP20X_BATT_CHRG_I_H),
> > > + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
> > > + AXP20X_BATT_DISCHRG_I_H),
> > > +};
> > > +
> > > static int axp20x_adc_raw(struct iio_dev *indio_dev,
> > > struct iio_chan_spec const *chan, int *val)
> > > {
> > > @@ -243,6 +273,18 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
> > > return IIO_VAL_INT;
> > > }
> > >
> > > +static int axp813_adc_raw(struct iio_dev *indio_dev,
> > > + struct iio_chan_spec const *chan, int *val)
> > > +{
> > > + struct axp20x_adc_iio *info = iio_priv(indio_dev);
> > > +
> > > + *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
> > > + if (*val < 0)
> > > + return *val;
> > > +
> > > + return IIO_VAL_INT;
> > > +}
> > > +
> > > static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
> > > {
> > > switch (channel) {
> > > @@ -273,6 +315,24 @@ static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
> > > }
> > > }
> > >
> > > +static int axp813_adc_scale_voltage(int channel, int *val, int *val2)
> > > +{
> > > + switch (channel) {
> > > + case AXP813_GPIO0_V:
> > > + *val = 0;
> > > + *val2 = 800000;
> > > + return IIO_VAL_INT_PLUS_MICRO;
> > > +
> > > + case AXP813_BATT_V:
> > > + *val = 1;
> > > + *val2 = 100000;
> > > + return IIO_VAL_INT_PLUS_MICRO;
> > > +
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> > > static int axp20x_adc_scale_current(int channel, int *val, int *val2)
> > > {
> > > switch (channel) {
> > > @@ -342,6 +402,26 @@ static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val,
> > > }
> > > }
> > >
> > > +static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val,
> > > + int *val2)
> > > +{
> > > + switch (chan->type) {
> > > + case IIO_VOLTAGE:
> > > + return axp813_adc_scale_voltage(chan->channel, val, val2);
> > > +
> > > + case IIO_CURRENT:
> > > + *val = 1;
> > > + return IIO_VAL_INT;
> > > +
> > > + case IIO_TEMP:
> > > + *val = 100;
> > > + return IIO_VAL_INT;
> > > +
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> > > static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
> > > int *val)
> > > {
> > > @@ -425,6 +505,26 @@ static int axp22x_read_raw(struct iio_dev *indio_dev,
> > > }
> > > }
> > >
> > > +static int axp813_read_raw(struct iio_dev *indio_dev,
> > > + struct iio_chan_spec const *chan, int *val,
> > > + int *val2, long mask)
> > > +{
> > > + switch (mask) {
> > > + case IIO_CHAN_INFO_OFFSET:
> > > + *val = -2667;
> > > + return IIO_VAL_INT;
> > > +
> > > + case IIO_CHAN_INFO_SCALE:
> > > + return axp813_adc_scale(chan, val, val2);
> > > +
> > > + case IIO_CHAN_INFO_RAW:
> > > + return axp813_adc_raw(indio_dev, chan, val);
> > > +
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> > > static int axp20x_write_raw(struct iio_dev *indio_dev,
> > > struct iio_chan_spec const *chan, int val, int val2,
> > > long mask)
> > > @@ -470,6 +570,10 @@ static const struct iio_info axp22x_adc_iio_info = {
> > > .read_raw = axp22x_read_raw,
> > > };
> > >
> > > +static const struct iio_info axp813_adc_iio_info = {
> > > + .read_raw = axp813_read_raw,
> > > +};
> > > +
> > > static int axp20x_adc_rate(struct axp20x_adc_iio *info, int rate)
> > > {
> > > return regmap_update_bits(info->regmap, AXP20X_ADC_RATE,
> > > @@ -484,6 +588,13 @@ static int axp22x_adc_rate(struct axp20x_adc_iio *info, int rate)
> > > AXP22X_ADC_RATE_HZ(rate));
> > > }
> > >
> > > +static int axp813_adc_rate(struct axp20x_adc_iio *info, int rate)
> > > +{
> > > + return regmap_update_bits(info->regmap, AXP813_ADC_RATE,
> > > + AXP813_ADC_RATE_MASK,
> > > + AXP813_ADC_RATE_HZ(rate));
> > > +}
> > > +
> > > struct axp_data {
> > > const struct iio_info *iio_info;
> > > int num_channels;
> > > @@ -515,9 +626,20 @@ static const struct axp_data axp22x_data = {
> > > .maps = axp22x_maps,
> > > };
> > >
> > > +static const struct axp_data axp813_data = {
> > > + .iio_info = &axp813_adc_iio_info,
> > > + .num_channels = ARRAY_SIZE(axp813_adc_channels),
> > > + .channels = axp813_adc_channels,
> > > + .adc_en1_mask = AXP22X_ADC_EN1_MASK,
> > > + .adc_rate = axp813_adc_rate,
> > > + .adc_en2 = false,
> > > + .maps = axp22x_maps,
> > > +};
> > > +
> > > static const struct of_device_id axp20x_adc_of_match[] = {
> > > { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, },
> > > { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, },
> > > + { .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, },
> > > { /* sentinel */ }
> > > };
> > > MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
> > > @@ -525,6 +647,7 @@ MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
> > > static const struct platform_device_id axp20x_adc_id_match[] = {
> > > { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
> > > { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
> > > + { .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, },
> > > { /* sentinel */ },
> > > };
> > > MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match);
> > > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> > > index 080798f..82bf774 100644
> > > --- a/include/linux/mfd/axp20x.h
> > > +++ b/include/linux/mfd/axp20x.h
> > > @@ -266,6 +266,8 @@ enum axp20x_variants {
> > > #define AXP288_RT_BATT_V_H 0xa0
> > > #define AXP288_RT_BATT_V_L 0xa1
> > >
> > > +#define AXP813_ADC_RATE 0x85
> > > +
> > > /* Fuel Gauge */
> > > #define AXP288_FG_RDC1_REG 0xba
> > > #define AXP288_FG_RDC0_REG 0xbb
> >

\
 
 \ /
  Last update: 2018-01-28 09:14    [W:0.051 / U:0.436 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site