lkml.org 
[lkml]   [2018]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 5/5] backlight: adp8860: document sysfs attributes
Add documentation for sysfs interface of adp8860 series backlight
devices by reading through code and git commits.

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
---
.../ABI/testing/sysfs-class-backlight-adp8860 | 54 ++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-backlight-adp8860

diff --git a/Documentation/ABI/testing/sysfs-class-backlight-adp8860 b/Documentation/ABI/testing/sysfs-class-backlight-adp8860
new file mode 100644
index 000000000000..54d61c788b1b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-backlight-adp8860
@@ -0,0 +1,54 @@
+sysfs interface for analog devices adp8860 backlight driver
+-----------------------------------------------------------
+
+The backlight brightness control operates at three different levels for the
+adp8860, adp8861 and adp8863 devices: daylight (level 1), office (level 2) and
+dark (level 3). By default the brightness operates at the daylight brightness
+level.
+
+What: /sys/class/backlight/<backlight>/ambient_light_level
+Date: Apr, 2010
+KernelVersion: v2.6.35
+Contact: Michael Hennerich <michael.hennerich@analog.com>
+Description:
+ (RO) 13-bit conversion value for the first light sensor—high
+ byte (Bit 12 to Bit 8). The value is updated every 80 ms (when
+ the light sensor is enabled).
+
+
+What: /sys/class/backlight/<backlight>/ambient_light_zone
+Date: Apr, 2010
+KernelVersion: v2.6.35
+Contact: Michael Hennerich <michael.hennerich@analog.com>
+Description:
+ (RW) Read or write the specific level at which the backlight
+ operates. Value "0" enables automatic ambient light sensing, and
+ values "1", "2" or "3" set the control to daylight, office or
+ dark respectively.
+
+
+What: /sys/class/backlight/<backlight>/l1_daylight_max
+What: /sys/class/backlight/<backlight>/l2_office_max
+What: /sys/class/backlight/<backlight>/l3_dark_max
+Date: Apr, 2010
+KernelVersion: v2.6.35
+Contact: Michael Hennerich <michael.hennerich@analog.com>
+Description:
+ (RW) Maximum current setting for the backlight when brightness
+ is at one of the three levels (daylight, office or dark). This
+ is an input code between 0 and 127, which is transformed to a
+ value between 0 mA and 30 mA using linear or non-linear
+ algorithms.
+
+
+What: /sys/class/backlight/<backlight>/l1_daylight_dim
+What: /sys/class/backlight/<backlight>/l2_office_dim
+What: /sys/class/backlight/<backlight>/l3_dark_dim
+Date: Apr, 2010
+KernelVersion: v2.6.35
+Contact: Michael Hennerich <michael.hennerich@analog.com>
+Description:
+ (RW) Dim current setting for the backlight when brightness is at
+ one of the three levels (daylight, office or dark). This is an
+ input code between 0 and 127, which is transformed to a value
+ between 0 mA and 30 mA using linear or non-linear algorithms.
--
2.16.1
\
 
 \ /
  Last update: 2018-01-26 15:55    [W:0.121 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site