lkml.org 
[lkml]   [2018]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/2] printk: Console owner and waiter logic cleanup
Hello,

On (01/23/18 11:24), Steven Rostedt wrote:
[..]
> > With WQ we don't lockup the kernel, because we flush printk_safe in
> > preemptible context. And people are very much expected to fix the
> > misbehaving consoles. But that should not be printk_safe problem.
>
> Right, but now you just made printk safe unreliable to get information
> out, because you need to wait for a schedule to occur, and if there's
> issues, like a deadlock, that thread will never run. And you just lost
> you lockdep splat.

Yes and No.

printk_safe and printk_nmi are unreliable - both need irq_work. That's
why we forcibly flush those buffers in panic(). At least for printk_safe
case, and I'm pretty sure the same stands for printk_nmi, we never said
that we will store all the messages that were printed from unsafe context
(recursion or NMI). The only thing we said - we will try not to deadlock
the system.

Now we are adding one more thing to printk_safe - we will also try not to
lockup the system.

Default printk_safe buffer size might not be enough to store a very large
lockdep splat. And we will report that the buffer is too small and that we
lost some of the lines: "here is what we have, we lost N lines, but at least
we didn't deadlock the system". See f975237b76827956fe13ecfe993a319158e2c303
for more details, it contains a list of recursive-printk deadlock scenarios
that printk_safe was meant to handle.

It is possible and OK to lose messages in printk_safe/printk_nmi

printk_safe_enter_irqsave()
printk
printk
...
...
printk
printk
printk_safe_exit_irqrestore()

No flush will take place as long as there is no IRQ on that CPU.
But printk_safe and printk_nmi are solving different problem in
the first place.

> > I'll re-read this one tomorrow. Not quite following it.
>
> I'll add more capitals next time ;-)

Ha-ha-ha ;)

[..]
> > pintk_safe was designed to be recursive. It was never designed to be
> > used to troubleshoot or debug consoles. But it was designed to be
> > recursive - because that's the sort of the problems it was meant to
> > handle: recursive printks that would otherwise deadlock us. That's why
> > we have it in the first place.
>
> So printk safe is only triggered when at the same context? If we can
> guarantee that printk safe is triggered only when its because a printk
> is happening at the same context (not because of an interrupt, but
> really at the same context, using my context check), then I'm fine with
> delaying them to a work queue.

printk_safe is for printk recursion only. It happens in the same context
only. When we switch to printk_safe we disable local IRQs, NMIs have their
own printk_nmi thing. And the way we flush printk_safe is mostly recursive.
Because we flush when we know that we will not deadlock [as much as we can;
we can't control any 3rd party locks which might be involved; thus
printk_deferred() usage].

Usually it's something like

printk
spin_lock_irqsave(logbuf_lock)
printk
spin_lock_irqsave(logbuf_lock) << deadlock

What we have with printk_safe is

printk
local_irq_save
printk_safe_enter
spin_lock(logbuf_lock)
printk
vprintk_safe
queue irq work
spin_unlock(logbuf_lock)
printk_safe_exit
local_irq_restore
>>> IRQ work
printk_safe_flush
printk
spin_lock_irqsave(logbuf_lock)
log_store()
spin_unlock_irqrestore(logbuf_lock)

So we flush printk_safe ASAP, which usually (unless originally we were
not in IRQ) means that the flush is recursive, but safe - we don't
deadlock.

> That is, if we have this:
>
> printk()
> console_lock()
> <interrupt>
> printk()
> add to log buffer
> <print irq printk too>
> console_unlock();

Right. This is what we have right now. Every time we enable local IRQs in
the console_unlock() printing loop - we flush printk_safe. And that's the
problem.

> printk()
> console_lock()
> <console does a printk>
> put in printk safe buffer
> trigger work queue
> console_unlock()
> <work queue>
> flush safe buffer
> printk()

Right. This is what we will have with WQ. We don't flush printk_safe until
we return from console_unlock(). Because printk() disables preemption for
the duration of console_unlock(), we can't schedule WQ on that CPU. And we
schedule flushing work only on the CPU that has triggered the recursion.

Another thing:

console_lock()
blah blah
console_unlock()

In this case we will flush printk_safe withing the printing loop.
Immediately. But we don't care - the CPU is preemptible, we don't
lock up the kernel.


> Then I'm fine with that.
>
> I have to look at the latest code. If this is indeed what we have, then
> I admit I misunderstood the problem you want to solve.
>
> I only want recursive printks (those that are actually triggered by
> doing a printk) to be allowed to be delayed.
>
> Make sense?

Please take a look.

-ss

\
 
 \ /
  Last update: 2018-01-24 03:12    [W:0.236 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site