lkml.org 
[lkml]   [2018]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC v2 1/5] vfio/type1: Introduce iova list and add iommu aperture validity check
From
Date
Hi Shameer,

On 23/01/18 11:04, Shameerali Kolothum Thodi wrote:
> Hi Eric,
>
>> -----Original Message-----
>> From: Auger Eric [mailto:eric.auger@redhat.com]
>> Sent: Tuesday, January 23, 2018 8:25 AM
>> To: Alex Williamson <alex.williamson@redhat.com>; Shameerali Kolothum
>> Thodi <shameerali.kolothum.thodi@huawei.com>
>> Cc: pmorel@linux.vnet.ibm.com; kvm@vger.kernel.org; linux-
>> kernel@vger.kernel.org; Linuxarm <linuxarm@huawei.com>; John Garry
>> <john.garry@huawei.com>; xuwei (O) <xuwei5@huawei.com>
>> Subject: Re: [RFC v2 1/5] vfio/type1: Introduce iova list and add iommu
>> aperture validity check
>>
>> Hi Shameer,
>>
>> On 18/01/18 01:04, Alex Williamson wrote:
>>> On Fri, 12 Jan 2018 16:45:27 +0000
>>> Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> wrote:
>>>
>>>> This introduces an iova list that is valid for dma mappings. Make
>>>> sure the new iommu aperture window is valid and doesn't conflict
>>>> with any existing dma mappings during attach. Also update the iova
>>>> list with new aperture window during attach/detach.
>>>>
>>>> Signed-off-by: Shameer Kolothum
>> <shameerali.kolothum.thodi@huawei.com>
>>>> ---
>>>> drivers/vfio/vfio_iommu_type1.c | 177
>> ++++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 177 insertions(+)
>>>>
>>>> diff --git a/drivers/vfio/vfio_iommu_type1.c
>> b/drivers/vfio/vfio_iommu_type1.c
>>>> index e30e29a..11cbd49 100644
>>>> --- a/drivers/vfio/vfio_iommu_type1.c
>>>> +++ b/drivers/vfio/vfio_iommu_type1.c
>>>> @@ -60,6 +60,7 @@
>>>>
>>>> struct vfio_iommu {
>>>> struct list_head domain_list;
>>>> + struct list_head iova_list;
>>>> struct vfio_domain *external_domain; /* domain for external user
>> */
>>>> struct mutex lock;
>>>> struct rb_root dma_list;
>>>> @@ -92,6 +93,12 @@ struct vfio_group {
>>>> struct list_head next;
>>>> };
>>>>
>>>> +struct vfio_iova {
>>>> + struct list_head list;
>>>> + phys_addr_t start;
>>>> + phys_addr_t end;
>>>> +};
>>>
>>> dma_list uses dma_addr_t for the iova. IOVAs are naturally DMA
>>> addresses, why are we using phys_addr_t?
>>>
>>>> +
>>>> /*
>>>> * Guest RAM pinning working set or DMA target
>>>> */
>>>> @@ -1192,6 +1199,123 @@ static bool vfio_iommu_has_sw_msi(struct
>> iommu_group *group, phys_addr_t *base)
>>>> return ret;
>>>> }
>>>>
>>>> +static int vfio_insert_iova(phys_addr_t start, phys_addr_t end,
>>>> + struct list_head *head)
>>>> +{
>>>> + struct vfio_iova *region;
>>>> +
>>>> + region = kmalloc(sizeof(*region), GFP_KERNEL);
>>>> + if (!region)
>>>> + return -ENOMEM;
>>>> +
>>>> + INIT_LIST_HEAD(&region->list);
>>>> + region->start = start;
>>>> + region->end = end;
>>>> +
>>>> + list_add_tail(&region->list, head);
>>>> + return 0;
>>>> +}
>>>
>>> As I'm reading through this series, I'm learning that there are a lot
>>> of assumptions and subtle details that should be documented. For
>>> instance, the IOMMU API only provides a single geometry and we build
>>> upon that here as this patch creates a list, but there's only a single
>>> entry for now. The following patches carve that single iova range into
>>> pieces and somewhat subtly use the list_head passed to keep the list
>>> sorted, allowing the first/last_entry tricks used throughout. Subtle
>>> interfaces are prone to bugs.
>>>
>>>> +
>>>> +/*
>>>> + * Find whether a mem region overlaps with existing dma mappings
>>>> + */
>>>> +static bool vfio_find_dma_overlap(struct vfio_iommu *iommu,
>>>> + phys_addr_t start, phys_addr_t end)
>>>> +{
>>>> + struct rb_node *n = rb_first(&iommu->dma_list);
>>>> +
>>>> + for (; n; n = rb_next(n)) {
>>>> + struct vfio_dma *dma;
>>>> +
>>>> + dma = rb_entry(n, struct vfio_dma, node);
>>>> +
>>>> + if (end < dma->iova)
>>>> + break;
>>>> + if (start >= dma->iova + dma->size)
>>>> + continue;
>>>> + return true;
>>>> + }
>>>> +
>>>> + return false;
>>>> +}
>>>
>>> Why do we need this in addition to the existing vfio_find_dma()? Why
>>> doesn't this use the tree structure of the dma_list?
>>>
>>>> +
>>>> +/*
>>>> + * Check the new iommu aperture is a valid one
>>>> + */
>>>> +static int vfio_iommu_valid_aperture(struct vfio_iommu *iommu,
>>>> + phys_addr_t start,
>>>> + phys_addr_t end)
>>>> +{
>>>> + struct vfio_iova *first, *last;
>>>> + struct list_head *iova = &iommu->iova_list;
>>>> +
>>>> + if (list_empty(iova))
>>>> + return 0;
>>>> +
>>>> + /* Check if new one is outside the current aperture */
>>>
>>> "Disjoint sets"
>>>
>>>> + first = list_first_entry(iova, struct vfio_iova, list);
>>>> + last = list_last_entry(iova, struct vfio_iova, list);
>>>> + if ((start > last->end) || (end < first->start))
>>>> + return -EINVAL;
>>>> +
>>>> + /* Check for any existing dma mappings outside the new start */
>>>> + if (start > first->start) {
>>>> + if (vfio_find_dma_overlap(iommu, first->start, start - 1))
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + /* Check for any existing dma mappings outside the new end */
>>>> + if (end < last->end) {
>>>> + if (vfio_find_dma_overlap(iommu, end + 1, last->end))
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>
>>> I think this returns an int because you want to use it for the return
>>> value below, but it really seems like a bool question, ie. does this
>>> aperture conflict with existing mappings. Additionally, the aperture
>>> is valid, it was provided to us by the IOMMU API, the question is
>>> whether it conflicts. Please also name consistently to the other
>>> functions in this patch, vfio_iommu_aper_xxxx().
>>>
>>>> +
>>>> +/*
>>>> + * Adjust the iommu aperture window if new aperture is a valid one
>>>> + */
>>>> +static int vfio_iommu_iova_aper_adjust(struct vfio_iommu *iommu,
>>>> + phys_addr_t start,
>>>> + phys_addr_t end)
>>>
>>> Perhaps "resize", "prune", or "shrink" to make it more clear what is
>>> being adjusted?
>>>
>>>> +{
>>>> + struct vfio_iova *node, *next;
>>>> + struct list_head *iova = &iommu->iova_list;
>>>> +
>>>> + if (list_empty(iova))
>>>> + return vfio_insert_iova(start, end, iova);
>>>> +
>>>> + /* Adjust iova list start */
>>>> + list_for_each_entry_safe(node, next, iova, list) {
>>>> + if (start < node->start)
>>>> + break;
>>>> + if ((start >= node->start) && (start <= node->end)) {
>>>
>>> start == node->end results in a zero sized node. s/<=/</
>>>
>>>> + node->start = start;
>>>> + break;
>>>> + }
>>>> + /* Delete nodes before new start */
>>>> + list_del(&node->list);
>>>> + kfree(node);
>>>> + }
>>>> +
>>>> + /* Adjust iova list end */
>>>> + list_for_each_entry_safe(node, next, iova, list) {
>>>> + if (end > node->end)
>>>> + continue;
>>>> +
>>>> + if ((end >= node->start) && (end <= node->end)) {
>>>
>>> end == node->start results in a zero sized node. s/>=/>/
>>>
>>>> + node->end = end;
>>>> + continue;
>>>> + }
>>>> + /* Delete nodes after new end */
>>>> + list_del(&node->list);
>>>> + kfree(node);
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> static int vfio_iommu_type1_attach_group(void *iommu_data,
>>>> struct iommu_group *iommu_group)
>>>> {
>>>> @@ -1202,6 +1326,7 @@ static int vfio_iommu_type1_attach_group(void
>> *iommu_data,
>>>> int ret;
>>>> bool resv_msi, msi_remap;
>>>> phys_addr_t resv_msi_base;
>>>> + struct iommu_domain_geometry geo;
>>>>
>>>> mutex_lock(&iommu->lock);
>>>>
>>>> @@ -1271,6 +1396,14 @@ static int vfio_iommu_type1_attach_group(void
>> *iommu_data,
>>>> if (ret)
>>>> goto out_domain;
>>>>
>>>> + /* Get aperture info */
>>>> + iommu_domain_get_attr(domain->domain,
>> DOMAIN_ATTR_GEOMETRY, &geo);
>>>> +
>>>> + ret = vfio_iommu_valid_aperture(iommu, geo.aperture_start,
>>>> + geo.aperture_end);
>>>> + if (ret)
>>>> + goto out_detach;
>>>> +
>>>> resv_msi = vfio_iommu_has_sw_msi(iommu_group, &resv_msi_base);
>>>>
>>>> INIT_LIST_HEAD(&domain->group_list);
>>>> @@ -1327,6 +1460,11 @@ static int vfio_iommu_type1_attach_group(void
>> *iommu_data,
>>>> goto out_detach;
>>>> }
>>>>
>>>> + ret = vfio_iommu_iova_aper_adjust(iommu, geo.aperture_start,
>>>> + geo.aperture_end);
>>>> + if (ret)
>>>> + goto out_detach;
>>>> +
>>>> list_add(&domain->next, &iommu->domain_list);
>>>>
>>>> mutex_unlock(&iommu->lock);
>>>> @@ -1392,6 +1530,35 @@ static void vfio_sanity_check_pfn_list(struct
>> vfio_iommu *iommu)
>>>> WARN_ON(iommu->notifier.head);
>>>> }
>>>>
>>>> +/*
>>>> + * Called when a domain is removed in detach. It is possible that
>>>> + * the removed domain decided the iova aperture window. Modify the
>>>> + * iova aperture with the smallest window among existing domains.
>>>> + */
>>>> +static void vfio_iommu_iova_aper_refresh(struct vfio_iommu *iommu)
>>>> +{
>>>> + struct vfio_domain *domain;
>>>> + struct iommu_domain_geometry geo;
>>>> + struct vfio_iova *node;
>>>> + phys_addr_t start = 0;
>>>> + phys_addr_t end = (phys_addr_t)~0;
>>>> +
>>>> + list_for_each_entry(domain, &iommu->domain_list, next) {
>>>> + iommu_domain_get_attr(domain->domain,
>> DOMAIN_ATTR_GEOMETRY,
>>>> + &geo);
>>>> + if (geo.aperture_start > start)
>>>> + start = geo.aperture_start;
>>>> + if (geo.aperture_end < end)
>>>> + end = geo.aperture_end;
>>>> + }
>>>> +
>>>> + /* modify iova aperture limits */
>>>> + node = list_first_entry(&iommu->iova_list, struct vfio_iova, list);
>>>> + node->start = start;
>>>> + node = list_last_entry(&iommu->iova_list, struct vfio_iova, list);
>>>> + node->end = end;
>>>
>>> We can do this because the new aperture is the same or bigger than the
>>> current aperture, never smaller. That's not fully obvious and should
>>> be noted in the comment. Perhaps this function should be "expand"
>>> rather than "refresh".
>> This one is not obvious to me either:
>> assuming you have 2 domains, resp with aperture 1 and 2, resulting into
>> aperture 3. Holes are created by resv regions for instance. If you
>> remove domain 1, don't you get 4) instead of 2)?
>>
>> 1) |------------|
>> +
>> 2) |---| |--| |-----|
>> =
>> 3) |-| |--|
>>
>>
>> 4) |---| |----------------|
>
> That is true partially. But please remember that this patch is not aware of
> any reserved regions yet. That is introduced in patch #2. So patch #1 and #2
> together, the iova aperture might looks like 4) after this function call and once
> vfio_iommu_iova_resv_refresh() in patch #2 is done, the aperture will be
> back to 2).
>
> Hope I am clear. Please let me know.
Ah OK.
>
> In any case, based on comments by Alex, I will be removing this aperture/reserve
> refresh functions and leave the iova list as it is when a group is detached.
Looking forwarding to reviewing the next version then.

Thanks

Eric
>
> Thanks,
> Shameer
>
>> Thanks
>>
>> Eric
>>>
>>>> +}
>>>> +
>>>> static void vfio_iommu_type1_detach_group(void *iommu_data,
>>>> struct iommu_group *iommu_group)
>>>> {
>>>> @@ -1445,6 +1612,7 @@ static void vfio_iommu_type1_detach_group(void
>> *iommu_data,
>>>> iommu_domain_free(domain->domain);
>>>> list_del(&domain->next);
>>>> kfree(domain);
>>>> + vfio_iommu_iova_aper_refresh(iommu);
>>>> }
>>>> break;
>>>> }
>>>> @@ -1475,6 +1643,7 @@ static void *vfio_iommu_type1_open(unsigned
>> long arg)
>>>> }
>>>>
>>>> INIT_LIST_HEAD(&iommu->domain_list);
>>>> + INIT_LIST_HEAD(&iommu->iova_list);
>>>> iommu->dma_list = RB_ROOT;
>>>> mutex_init(&iommu->lock);
>>>> BLOCKING_INIT_NOTIFIER_HEAD(&iommu->notifier);
>>>> @@ -1502,6 +1671,7 @@ static void vfio_iommu_type1_release(void
>> *iommu_data)
>>>> {
>>>> struct vfio_iommu *iommu = iommu_data;
>>>> struct vfio_domain *domain, *domain_tmp;
>>>> + struct vfio_iova *iova, *iova_tmp;
>>>>
>>>> if (iommu->external_domain) {
>>>> vfio_release_domain(iommu->external_domain, true);
>>>> @@ -1517,6 +1687,13 @@ static void vfio_iommu_type1_release(void
>> *iommu_data)
>>>> list_del(&domain->next);
>>>> kfree(domain);
>>>> }
>>>> +
>>>> + list_for_each_entry_safe(iova, iova_tmp,
>>>> + &iommu->iova_list, list) {
>>>> + list_del(&iova->list);
>>>> + kfree(iova);
>>>> + }
>>>> +
>>>> kfree(iommu);
>>>> }
>>>>
>>>

\
 
 \ /
  Last update: 2018-01-23 12:21    [W:0.065 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site