[lkml]   [2018]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/4] usb: dwc3: Add dual-role support using OTG core
Hi Felipe,

Some platforms (e.g. TI's AM437x) don't have USB ID pin state available
over GPIO/extcon but need to rely on the DWC3 core's OTG block to
get the ID pin state instead.

This series implements simple dual-role functionality using DWC3's OTG block.
Debugfs 'mode' override is also functional so user can switch
between "otg", "host" or "device" modes for debug.

Although system suspend/resume isn't working yet in mainline for AM437x,
I've tested this series for system suspend/resume using a local tree.

This series depends on [1] and [2]



Roger Quadros (4):
usb: dwc3: prevent setting PRTCAP to OTG from debugfs
usb: dwc3: core.h: add some register definitions
usb: dwc3: add dual role support using OTG block
ARM: dts: am43xx: Enable dual-role mode for USB1

arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
drivers/usb/dwc3/core.c | 70 ++++-
drivers/usb/dwc3/core.h | 111 ++++++++
drivers/usb/dwc3/drd.c | 492 +++++++++++++++++++++++++++++++++--
6 files changed, 650 insertions(+), 29 deletions(-)


Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

 \ /
  Last update: 2018-01-22 14:12    [W:0.049 / U:1.792 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site