lkml.org 
[lkml]   [2018]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 24/41] ARM: dm644x: add new clock init using common clock framework
Date
This adds the new board-specific clock init in mach-davinci/dm644x.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Signed-off-by: David Lechner <david@lechnology.com>
---

v6 changes:
- add blank lines between function calls

arch/arm/mach-davinci/dm644x.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index b409801..5b5de85 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -8,28 +8,34 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/init.h>
+#include <linux/clk-provider.h>
#include <linux/clk.h>
-#include <linux/serial_8250.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
#include <linux/dmaengine.h>
-#include <linux/platform_device.h>
+#include <linux/init.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>

#include <asm/mach/map.h>

+#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include "psc.h"
#include <mach/mux.h>
-#include <mach/time.h>
#include <mach/serial.h>
-#include <mach/common.h>
+#include <mach/time.h>

+#include "asp.h"
#include "davinci.h"
-#include "clock.h"
#include "mux.h"
-#include "asp.h"
+
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif

/*
* Device specific clocks
@@ -43,6 +49,7 @@
#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000

+#ifndef CONFIG_COMMON_CLK
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -326,6 +333,7 @@ static struct clk_lookup dm644x_clks[] = {
CLK("davinci-wdt", NULL, &timer2_clk),
CLK(NULL, NULL, NULL),
};
+#endif

static struct emac_platform_data dm644x_emac_pdata = {
.ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
@@ -934,7 +942,21 @@ void __init dm644x_init(void)

void __init dm644x_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll1, *pll2, *psc;
+
+ pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_4K);
+ pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_4K);
+ psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ);
+
+ dm644x_pll_clk_init(pll1, pll2);
+
+ dm644x_psc_clk_init(psc);
+#else
davinci_clk_init(dm644x_clks);
+#endif
davinci_timer_init();
}

--
2.7.4
\
 
 \ /
  Last update: 2018-01-20 18:19    [W:0.303 / U:11.400 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site