lkml.org 
[lkml]   [2018]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] PCI: imx6: Add PHY reference clock source support
Hi Ilya,

+ Rob and dt list

On Sun, Dec 31, 2017 at 6:31 AM, Ilya Ledvich <ilya@compulab.co.il> wrote:
> i.MX7D variant of the IP can use either Crystal Oscillator input
> or internal clock input as a Reference Clock input for PCIe PHY.
> Add support for an optional property 'pcie-phy-refclk-internal'.
> If present then an internal clock input is used as PCIe PHY
> reference clock source. By default an external oscillator input
> is still used.
>
> Verified on Compulab SBC-iMX7 Single Board Computer.
>
> Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
> ---
> Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 5 +++++
> drivers/pci/dwc/pci-imx6.c | 8 +++++++-
> 2 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index 7b1e48b..581bc09 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -50,6 +50,11 @@ Additional required properties for imx7d-pcie:
> - "pciephy"
> - "apps"
>
> +Additional optional properties for imx7d-pcie:
> +- pcie-phy-refclk-internal: If present then an internal PLL input is used as
> + PCIe PHY reference clock source. By default an external oscillator input
> + is used.

Should this contain the vendor prefix, like fsl,pcie-phy-refclk-internal ?

\
 
 \ /
  Last update: 2018-01-02 23:55    [W:0.098 / U:12.392 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site