lkml.org 
[lkml]   [2018]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 20/44] dt-bindings: clock: Add bindings for TI DA8XX USB PHY clocks
From
Date
On 01/18/2018 06:10 AM, Sekhar Nori wrote:
> On Monday 08 January 2018 07:47 AM, David Lechner wrote:
>> This adds a new binding for TI DA8XX USB PHY clocks. These clocks are part
>> of a syscon register called CFGCHIP3.
>
> CFGCHIP2
>
>>
>> Signed-off-by: David Lechner <david@lechnology.com>
>
>> +Examples:
>> +
>> + cfgchip: syscon@1417c {
>> + compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
>> + reg = <0x1417c 0x14>;
>> +
>> + usb0_phy_clk: usb0-phy-clock {
>> + compatible = "ti,da830-usb0-phy-clock";
>> + #clock-cells = <0>;
>> + clocks = <&usb_refclkin>, <&pll0_aux_clk>, <&psc1 1>;
>> + clock-names = "usb_refclkin", "auxclk", "usb0_lpsc";
>> + clock-output-names = "usb0_phy_clk";
>
> Probably call this "usb0_phy" to match with the input name used for
> usb1_phy_clk?

I was planning on just dropping clock-output-names altogether actually
since they don't really do anything useful.

Also, I was considering sending a series to change the con_id for the
PHY clocks.

My current revision of the device tree bindings is looking like this:

usb_phy: usb-phy {
compatible = "ti,da830-usb-phy";
#phy-cells = <1>;
clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
clock-names = "usb20_phy", "usb11_phy";
status = "disabled";
};
usb_phy_clk: usb-phy-clocks {
compatible = "ti,da830-usb-phy-clocks";
#clock-cells = <1>;
clocks = <&psc1 1>, <&usb_refclkin>, <&pll0_auxclk>;
clock-names = "fck", "usb_refclkin", "auxclk";
};

The clock-names = "usb20_phy", "usb11_phy" comes from the existing con_ids
in the PHY driver's clk_get()s.

However, in device tree, we are usually referring to the USB devices as
usb0 and usb1 instead of usb20 and usb11, respectively. Figure 6-2 "USB
Clocking Diagram" in spruh82c.pdf (AM1808 TRM) calls these clocks "CLK48"
and "CLK48MHz from USB 2.0 PHY", so I was thinking of changing the con_ids
(and therefore also clock-names) to "usb0_clk48" and "usb1_clk48".


\
 
 \ /
  Last update: 2018-01-18 20:00    [W:0.220 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site