lkml.org 
[lkml]   [2018]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 16/16] mmc: tmio: remove useless TMIO_MASK_CMD handling in tmio_mmc_host_probe()
Date
TMIO_MASK_CMD is properly enabled in tmio_mmc_start_command().

We have no reason to set it up in tmio_mmc_host_probe(). (If we
really wanted to set it in the probe, we would have to do likewise
when resuming.)

Even worse, the following code is extremely confusing:

_host->sdcard_irq_mask &= ~irq_mask;

The logic is opposite between "->sdcard_irq_mask" and "irq_mask".
The intention is not clear at a glance.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

Changes in v3: None
Changes in v2:
- Newly added

drivers/mmc/host/tmio_mmc_core.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 494f0b3..b75a51b 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -1209,7 +1209,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
struct tmio_mmc_data *pdata = _host->pdata;
struct mmc_host *mmc = _host->mmc;
int ret;
- u32 irq_mask = TMIO_MASK_CMD;

/*
* Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
@@ -1291,8 +1290,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);

- _host->sdcard_irq_mask &= ~irq_mask;
-
if (_host->native_hotplug)
tmio_mmc_enable_mmc_irqs(_host,
TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
--
2.7.4
\
 
 \ /
  Last update: 2018-01-18 00:21    [W:0.270 / U:4.652 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site