lkml.org 
[lkml]   [2018]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] fbdev: don't select I2C directly
Date
Using a Kconfig 'select' statement for a user-visible symbol that other
drivers depend on often causes circular dependencies. A new one showed
up when I wanted to add an NVMEM dependency to the DRM_MSM driver:

drivers/i2c/Kconfig:7:error: recursive dependency detected!
drivers/i2c/Kconfig:7: symbol I2C is selected by FB_DDC
drivers/video/fbdev/Kconfig:63: symbol FB_DDC is selected by FB_CYBER2000_DDC
drivers/video/fbdev/Kconfig:390: symbol FB_CYBER2000_DDC depends on FB_CYBER2000
drivers/video/fbdev/Kconfig:378: symbol FB_CYBER2000 depends on FB
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:77: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:71: symbol DRM_KMS_HELPER is selected by DRM_MSM
drivers/gpu/drm/msm/Kconfig:2: symbol DRM_MSM depends on NVMEM
drivers/nvmem/Kconfig:1: symbol NVMEM is selected by EEPROM_AT24
drivers/misc/eeprom/Kconfig:3: symbol EEPROM_AT24 depends on I2C

Here, the problem is that many fbdev drivers have an i2c based interface
and just 'select i2c' for that, while we also select the framebuffer
subsystem indirectly from a DRM driver that now depends on i2c.

This does away with the 'select' statement and instead uses 'depends on',
like almost all I2C users.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/video/fbdev/Kconfig | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 6962b4583fd7..892eb1863100 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -64,7 +64,6 @@ config FB_DDC
tristate
depends on FB
select I2C_ALGOBIT
- select I2C
default n

config FB_BOOT_VESA_SUPPORT
@@ -390,6 +389,7 @@ config FB_CYBER2000
config FB_CYBER2000_DDC
bool "DDC for CyberPro support"
depends on FB_CYBER2000
+ depends on I2C=y || I2C=FB_CYBER2000
select FB_DDC
default y
help
@@ -634,7 +634,7 @@ config FB_BF537_LQ035
config FB_BFIN_7393
tristate "Blackfin ADV7393 Video encoder"
depends on FB && BLACKFIN
- select I2C
+ depends on I2C
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1026,6 +1026,7 @@ config FB_NVIDIA
config FB_NVIDIA_I2C
bool "Enable DDC Support"
depends on FB_NVIDIA
+ depends on I2C=y || I2C=FB_NVIDIA
select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
@@ -1073,6 +1074,7 @@ config FB_RIVA
config FB_RIVA_I2C
bool "Enable DDC Support"
depends on FB_RIVA
+ depends on I2C=y || I2C=FB_RIVA
select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
@@ -1102,6 +1104,7 @@ config FB_RIVA_BACKLIGHT
config FB_I740
tristate "Intel740 support"
depends on FB && PCI
+ depends on I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1155,6 +1158,7 @@ config FB_I810_GTF
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && FB_I810_GTF
+ depends on I2C=y || I2C=FB_I810
select FB_DDC
help

@@ -1206,6 +1210,7 @@ config FB_INTEL_DEBUG
config FB_INTEL_I2C
bool "DDC/I2C for Intel framebuffer support"
depends on FB_INTEL
+ depends on I2C=y || I2C=FB_INTEL
select FB_DDC
default y
help
@@ -1285,6 +1290,7 @@ config FB_MATROX_G
config FB_MATROX_I2C
tristate "Matrox I2C support"
depends on FB_MATROX
+ depends on I2C
select FB_DDC
---help---
This drivers creates I2C buses which are needed for accessing the
@@ -1350,6 +1356,7 @@ config FB_RADEON
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
+ depends on I2C=y || I2C=FB_RADEON
select FB_DDC
default y
help
@@ -1460,6 +1467,7 @@ config FB_S3
config FB_S3_DDC
bool "DDC for S3 support"
depends on FB_S3
+ depends on I2C=y || I2C=FB_S3
select FB_DDC
default y
help
@@ -1485,6 +1493,7 @@ config FB_SAVAGE
config FB_SAVAGE_I2C
bool "Enable DDC2 Support"
depends on FB_SAVAGE
+ depends on I2C=y || I2C=FB_SAVAGE
select FB_DDC
help
This enables I2C support for S3 Savage Chipsets. This is used
@@ -1629,6 +1638,7 @@ config FB_3DFX_ACCEL
config FB_3DFX_I2C
bool "Enable DDC/I2C support"
depends on FB_3DFX
+ depends on I2C=y || I2C=FB_3DFX
select FB_DDC
default y
help
@@ -1669,6 +1679,7 @@ config FB_VT8623
config FB_TRIDENT
tristate "Trident/CyberXXX/CyberBlade support"
depends on FB && PCI
+ depends on I2C
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -2299,8 +2310,8 @@ endchoice

config FB_MB862XX_I2C
bool "Support I2C bus on MB862XX GDC"
- depends on FB_MB862XX && I2C
- depends on FB_MB862XX=m || I2C=y
+ depends on FB_MB862XX
+ depends on I2C=y || I2C=FB_MB862XX
default y
help
Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
--
2.9.0
\
 
 \ /
  Last update: 2018-01-15 17:15    [W:0.381 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site