lkml.org 
[lkml]   [2018]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 50/96] target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
Date
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream.

This patch fixes bug where early se_cmd exceptions that occur
before backend execution can result in use-after-free if/when
a subsequent ABORT_TASK occurs for the same tag.

Since an early se_cmd exception will have had se_cmd added to
se_session->sess_cmd_list via target_get_sess_cmd(), it will
not have CMD_T_COMPLETE set by the usual target_complete_cmd()
backend completion path.

This causes a subsequent ABORT_TASK + __target_check_io_state()
to signal ABORT_TASK should proceed. As core_tmr_abort_task()
executes, it will bring the outstanding se_cmd->cmd_kref count
down to zero releasing se_cmd, after se_cmd has already been
queued with error status into fabric driver response path code.

To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is
set at target_get_sess_cmd() time, and cleared immediately before
backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE
is set.

Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to
determine when an early exception has occured, and avoid aborting
this se_cmd since it will have already been queued into fabric
driver response path code.

Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
drivers/target/target_core_tmr.c | 9 +++++++++
drivers/target/target_core_transport.c | 2 ++
include/target/target_core_base.h | 1 +
3 files changed, 12 insertions(+)

--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -133,6 +133,15 @@ static bool __target_check_io_state(stru
spin_unlock(&se_cmd->t_state_lock);
return false;
}
+ if (se_cmd->transport_state & CMD_T_PRE_EXECUTE) {
+ if (se_cmd->scsi_status) {
+ pr_debug("Attempted to abort io tag: %llu early failure"
+ " status: 0x%02x\n", se_cmd->tag,
+ se_cmd->scsi_status);
+ spin_unlock(&se_cmd->t_state_lock);
+ return false;
+ }
+ }
if (sess->sess_tearing_down || se_cmd->cmd_wait_set) {
pr_debug("Attempted to abort io tag: %llu already shutdown,"
" skipping\n", se_cmd->tag);
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1939,6 +1939,7 @@ void target_execute_cmd(struct se_cmd *c
}

cmd->t_state = TRANSPORT_PROCESSING;
+ cmd->transport_state &= ~CMD_T_PRE_EXECUTE;
cmd->transport_state |= CMD_T_ACTIVE|CMD_T_BUSY|CMD_T_SENT;
spin_unlock_irq(&cmd->t_state_lock);

@@ -2592,6 +2593,7 @@ int target_get_sess_cmd(struct se_cmd *s
ret = -ESHUTDOWN;
goto out;
}
+ se_cmd->transport_state |= CMD_T_PRE_EXECUTE;
list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list);
out:
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -493,6 +493,7 @@ struct se_cmd {
#define CMD_T_BUSY (1 << 9)
#define CMD_T_TAS (1 << 10)
#define CMD_T_FABRIC_STOP (1 << 11)
+#define CMD_T_PRE_EXECUTE (1 << 12)
spinlock_t t_state_lock;
struct kref cmd_kref;
struct completion t_transport_stop_comp;

\
 
 \ /
  Last update: 2018-01-15 14:46    [W:0.246 / U:3.976 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site