lkml.org 
[lkml]   [2018]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/16] add support for AXP813 ADC and battery power supply
Date
The AXP813 PMIC is relatively close to the already supported AXP20X and
AXP22X. It provides three different power outputs: battery, AC and USB, and
measures a few different things: temperature, power supply status, current
current and voltage supplied, maximum current limit, battery capacity, min
and max voltage limits.

One of its two GPIOs can be used as an ADC.

There are a few differences with AXP20X/AXP22X PMICs though:
- a different constant charge current formula,
- battery temperature, GPIO0 and battery voltages are the only voltages
measurable,
- all data are stored on 12 bits (AXP20X/AXP22X had one type of data that
was stored on 13 bits),
- different scales and offsets,
- a different ADC rate formula and register,

This patch series adds support for the PMIC's ADC and battery power supply
in the existing drivers.

Make the axp20x MFD automatically probe the ADC driver, add the battery
power supply node in axp81x node and enable it for the TBS A711 since it
has a soldered battery.

I suggest patches:
- 4,5,8,14,15,16 go through Maxime and Chen-Yu's tree,
- 1,2,3,7 go through Jonathan's tree,
- 6,9,13 go through Lee's tree,
- 10,11,12 go through Sebastian's tree,

v3:
- merging dt-bindings patches for axp_adc as requested by Rob,
- re-ordered constant in IIO driver as requested by Julian,
- compatibles for ADC are now named after the first design that
introduced the IP instead of wildcard as requested by Maxime,
- renamed DT node name from axp-adc to adc as requested by Rob,
- replaced enumeration of supported PMICs in battery power supply DT
bindings documentation by "supported devices" as requested by Jonathan,
- added a new patch for removing "axp-" from axp81x's pinctrl DT node,

v2:
- introduce data structure instead of ID for variant specific code in
battery driver,
- add DT binding for ADC driver,
- make mfd probe the ADC driver via DT as well so that its IIO channels
can be consumed by other drivers via DT mapping,

Thanks,
Quentin

Quentin Schulz (16):
iio: adc: axp20x_adc: put ADC rate setting in a per-variant function
dt-bindings: iio: adc: add binding for X-Powers AXP PMICs ADC
iio: adc: axp20x_adc: make it possible to probe from DT
ARM: dtsi: axp209: add node for ADC
ARM: dtsi: axp22x: add node for ADC
mfd: axp20x: make AXP209/22x cells probe their ADC via DT
iio: adc: axp20x_adc: add support for AXP813 ADC
ARM: dtsi: axp81x: add node for ADC
mfd: axp20x: probe axp20x_adc driver for AXP813
power: supply: axp20x_battery: use data structure instead of ID for variant specific code
dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
power: supply: axp20x_battery: add support for AXP813
mfd: axp20x: add battery power supply cell for AXP813
ARM: dtsi: axp81x: add battery power supply subnode
ARM: dtsi: sun8i: a711: enable battery power supply subnode
ARM: dtsi: axp81x: remove IP name from DT node name

Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt | 48 ++++++++++++++++++++++-
Documentation/devicetree/bindings/power/supply/axp20x_battery.txt | 8 ++--
arch/arm/boot/dts/axp209.dtsi | 5 ++-
arch/arm/boot/dts/axp22x.dtsi | 5 ++-
arch/arm/boot/dts/axp81x.dtsi | 12 ++++-
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 4 ++-
drivers/iio/adc/axp20x_adc.c | 160 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
drivers/mfd/axp20x.c | 13 +++++-
drivers/power/supply/axp20x_battery.c | 134 ++++++++++++++++++++++++++++++++++++++++++++++--------------
include/linux/mfd/axp20x.h | 2 +-
10 files changed, 346 insertions(+), 45 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt

base-commit: b625c1ff82272e26c76570d3c7123419ec345b20
--
git-series 0.9.1

\
 
 \ /
  Last update: 2018-01-15 11:35    [W:0.161 / U:0.800 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site