lkml.org 
[lkml]   [2018]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv3 1/5] net: dsa: Support internal phy on 'cpu' port
From
Date
On 01/15/2018 11:37 AM, Sebastian Reichel wrote:
> This adds support for enabling the internal PHY for a 'cpu' port.
> It has been tested on GE B850v3, B650v3 and B450v3, which have a
> built-in MV88E6240 switch connected to a PCIe based network card.
> Without this patch the link does not come up and no traffic can be
> routed through the switch.
>
> The PHY interface, that is being used on the above test systems is
> part of the MV88E6240 and since mv88e6xxx driver resets the chip
> during probe, it is definitely disabled without this patch.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
> ---
> net/dsa/port.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/net/dsa/port.c b/net/dsa/port.c
> index bb4be2679904..011ecd9b1be7 100644
> --- a/net/dsa/port.c
> +++ b/net/dsa/port.c
> @@ -273,6 +273,55 @@ int dsa_port_vlan_del(struct dsa_port *dp,
> return 0;
> }
>
> +static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
> +{
> + struct device_node *port_dn = dp->dn;
> + struct device_node *phy_dn;
> + struct dsa_switch *ds = dp->ds;
> + struct phy_device *phydev;
> + int port = dp->index;
> + int err = 0;

I don't have a better solution to offer yet, but this is really making
the number of special cases within DSA much worse, thus impending the
on-going conversion to PHYLINK...

Having PHYs with no network devices is clearly a hack so maybe we should
re-think this whole design paradigm in DSA for which we don't have
net_device being created for CPU and DSA links, and maybe come up with
an actual net_device and just not expose it to the default namespace.

Anyway...

> +
> + phy_dn = of_parse_phandle(port_dn, "phy-handle", 0);
> + if (!phy_dn)
> + return 0;
> +
> + phydev = of_phy_find_device(phy_dn);
> + if (!phydev) {
> + err = -EPROBE_DEFER;
> + goto err_put_of;
> + }
> +
> + if (enable) {
> + err = genphy_config_init(phydev);
> + if (err < 0)
> + goto err_put_dev;
> +
> + err = genphy_resume(phydev);
> + if (err < 0)
> + goto err_put_dev;
> +
> + err = genphy_read_status(phydev);
> + if (err < 0)
> + goto err_put_dev;
> + } else {
> + err = genphy_suspend(phydev);
> + if (err < 0)
> + goto err_put_dev;
> + }
> +
> + if (ds->ops->adjust_link)
> + ds->ops->adjust_link(ds, port, phydev);
> +
> + dev_dbg(ds->dev, "enabled port's phy: %s", phydev_name(phydev));
> +
> +err_put_dev:
> + put_device(&phydev->mdio.dev);
> +err_put_of:
> + of_node_put(phy_dn);
> + return err;
> +}
> +
> int dsa_port_fixed_link_register_of(struct dsa_port *dp)
> {
> struct device_node *dn = dp->dn;
> @@ -305,6 +354,10 @@ int dsa_port_fixed_link_register_of(struct dsa_port *dp)
> ds->ops->adjust_link(ds, port, phydev);
>
> put_device(&phydev->mdio.dev);
> + } else {
> + err = dsa_port_setup_phy_of(dp, true);
> + if (err)
> + return err;
> }
>
> return 0;
> @@ -316,4 +369,6 @@ void dsa_port_fixed_link_unregister_of(struct dsa_port *dp)
>
> if (of_phy_is_fixed_link(dn))
> of_phy_deregister_fixed_link(dn);
> + else
> + dsa_port_setup_phy_of(dp, false);
> }
>


--
Florian

\
 
 \ /
  Last update: 2018-01-15 21:26    [W:0.073 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site