lkml.org 
[lkml]   [2018]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] dt-bindings: gpio: Add binding for Wii GPIO controller
Date
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
.../bindings/gpio/nintendo,hollywood-gpio.txt | 27 ++++++++++++++++++++++
.../devicetree/bindings/powerpc/nintendo/wii.txt | 9 +-------
2 files changed, 28 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt

diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
new file mode 100644
index 000000000000..a97ce6b5b724
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
@@ -0,0 +1,27 @@
+Nintendo Wii (Hollywood) GPIO controller
+
+Required properties:
+- compatible: "nintendo,hollywood-gpio
+- reg: Physical base address and length of the controller's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+ second cell is used to specify optional parameters:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted).
+
+Optional properties:
+- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
+ interrupt.
+- interrupt-parent: phandle of the parent interrupt controller.
+
+Example:
+
+ GPIO: gpio@0d8000c0 {
+ #gpio-cells = <2>;
+ compatible = "nintendo,hollywood-gpio";
+ reg = <0x0d8000c0 0x40>;
+ gpio-controller;
+ ngpios = <24>;
+ }
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
index 36afa322b04b..a3dc4b9fa11a 100644
--- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -152,14 +152,7 @@ Nintendo Wii device tree

1.l) The General Purpose I/O (GPIO) controller node

- Represents the dual access 32 GPIO controller interface.
-
- Required properties:
-
- - #gpio-cells : <2>
- - compatible : should be "nintendo,hollywood-gpio"
- - reg : should contain the IPC registers location and length
- - gpio-controller
+ see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt

1.m) The control node

--
2.15.1
\
 
 \ /
  Last update: 2018-01-15 04:15    [W:0.060 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site