lkml.org 
[lkml]   [2018]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/platform] x86/apic: Install an empty physflat_init_apic_ldr
Commit-ID:  32c9c801a853f181448ed4e8730168c556f9e05a
Gitweb: https://git.kernel.org/tip/32c9c801a853f181448ed4e8730168c556f9e05a
Author: Jan Kiszka <jan.kiszka@siemens.com>
AuthorDate: Mon, 27 Nov 2017 09:11:43 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Sun, 14 Jan 2018 21:11:53 +0100

x86/apic: Install an empty physflat_init_apic_ldr

As the comment already stated, there is no need for setting up LDR (and
DFR) in physflat mode as it remains unused (see SDM, 10.6.2.1).
flat_init_apic_ldr only served as a placeholder for a nop operation so
far, causing no harm.

That will change when running over the Jailhouse hypervisor. Here we
must not touch LDR in a way that destroys the mapping originally set up
by the Linux root cell. Jailhouse enforces this setting in order to
efficiently validate any IPI requests sent by a cell.

Avoid a needless clash caused by flat_init_apic_ldr by installing a true
nop handler.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: jailhouse-dev@googlegroups.com
Link: https://lkml.kernel.org/r/f9867d294cdae4d45ed89d3a2e6adb524f4f6794.1511770314.git.jan.kiszka@siemens.com

---
arch/x86/kernel/apic/apic_flat_64.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 25a8702..4b55477 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -218,6 +218,15 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
return 0;
}

+static void physflat_init_apic_ldr(void)
+{
+ /*
+ * LDR and DFR are not involved in physflat mode, rather:
+ * "In physical destination mode, the destination processor is
+ * specified by its local APIC ID [...]." (Intel SDM, 10.6.2.1)
+ */
+}
+
static void physflat_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
@@ -251,8 +260,7 @@ static struct apic apic_physflat __ro_after_init = {
.dest_logical = 0,
.check_apicid_used = NULL,

- /* not needed, but shouldn't hurt: */
- .init_apic_ldr = flat_init_apic_ldr,
+ .init_apic_ldr = physflat_init_apic_ldr,

.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
\
 
 \ /
  Last update: 2018-01-14 23:27    [W:0.104 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site