lkml.org 
[lkml]   [2018]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/2] nvmem: add driver for JZ4780 efuse
On Sat, Jan 6, 2018 at 6:43 AM, PrasannaKumar Muralidharan
<prasannatsmkumar@gmail.com> wrote:
> Hi Rob,
>
> On 4 January 2018 at 01:32, Rob Herring <robh@kernel.org> wrote:
>> On Thu, Dec 28, 2017 at 10:29:52PM +0100, Mathieu Malaterre wrote:
>>> From: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
>>>
>>> This patch brings support for the JZ4780 efuse. Currently it only expose
>>> a read only access to the entire 8K bits efuse memory.
>>>
>>> Tested-by: Mathieu Malaterre <malat@debian.org>
>>> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
>>> Signed-off-by: Mathieu Malaterre <malat@debian.org>
>>> ---
>>> .../ABI/testing/sysfs-driver-jz4780-efuse | 16 ++
>>> .../bindings/nvmem/ingenic,jz4780-efuse.txt | 17 ++
>>
>> Please split bindings to separate patch.
>>
>>> MAINTAINERS | 5 +
>>> arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++-
>>
>> dts files should also be separate.
>>
>>> drivers/nvmem/Kconfig | 10 +
>>> drivers/nvmem/Makefile | 2 +
>>> drivers/nvmem/jz4780-efuse.c | 305 +++++++++++++++++++++
>>> 7 files changed, 383 insertions(+), 12 deletions(-)
>>> create mode 100644 Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>>> create mode 100644 Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt
>>> create mode 100644 drivers/nvmem/jz4780-efuse.c
>>>
>>> diff --git a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>>> new file mode 100644
>>> index 000000000000..bb6f5d6ceea0
>>> --- /dev/null
>>> +++ b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>>> @@ -0,0 +1,16 @@
>>> +What: /sys/devices/*/<our-device>/nvmem
>>> +Date: December 2017
>>> +Contact: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
>>> +Description: read-only access to the efuse on the Ingenic JZ4780 SoC
>>> + The SoC has a one time programmable 8K efuse that is
>>> + split into segments. The driver supports read only.
>>> + The segments are
>>> + 0x000 64 bit Random Number
>>> + 0x008 128 bit Ingenic Chip ID
>>> + 0x018 128 bit Customer ID
>>> + 0x028 3520 bit Reserved
>>> + 0x1E0 8 bit Protect Segment
>>> + 0x1E1 2296 bit HDMI Key
>>> + 0x300 2048 bit Security boot key
>>
>> Why do these need to be exposed to userspace?
>>
>> sysfs is 1 value per file and this is lots of different things.
>>
>> We already have ways to feed random data (entropy) to the system. And we
>> have a way to expose SoC ID info to userspace (socdev).
>
> Currently ingenic chip id is not used anywhere. The vendor BSP exposed
> only chip id and customer id. Should we do the same? Please provide
> your suggestion.

No. Don't create an ABI if you don't really need it.

>
>>> +Users: any user space application which wants to read the Chip
>>> + and Customer ID
>>> diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt
>>> new file mode 100644
>>> index 000000000000..cd6d67ec22fc
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt
>>> @@ -0,0 +1,17 @@
>>> +Ingenic JZ EFUSE driver bindings
>>> +
>>> +Required properties:
>>> +- "compatible" Must be set to "ingenic,jz4780-efuse"
>>> +- "reg" Register location and length
>>> +- "clocks" Handle for the ahb clock for the efuse.
>>> +- "clock-names" Must be "bus_clk"
>>> +
>>> +Example:
>>> +
>>> +efuse: efuse@134100d0 {
>>> + compatible = "ingenic,jz4780-efuse";
>>> + reg = <0x134100D0 0xFF>;
>>> +
>>> + clocks = <&cgu JZ4780_CLK_AHB2>;
>>> + clock-names = "bus_clk";
>>> +};
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index a6e86e20761e..7a050c20c533 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -6902,6 +6902,11 @@ M: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
>>> S: Maintained
>>> F: drivers/dma/dma-jz4780.c
>>>
>>> +INGENIC JZ4780 EFUSE Driver
>>> +M: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
>>> +S: Maintained
>>> +F: drivers/nvmem/jz4780-efuse.c
>>
>> Binding file?
>
> Sorry, missed it. Will add it.
>
>>> +
>>> INGENIC JZ4780 NAND DRIVER
>>> M: Harvey Hunt <harveyhuntnexus@gmail.com>
>>> L: linux-mtd@lists.infradead.org
>>> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>> index 9b5794667aee..3fb9d916a2ea 100644
>>> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>> @@ -224,21 +224,37 @@
>>> reg = <0x10002000 0x100>;
>>> };
>>>
>>> - nemc: nemc@13410000 {
>>> - compatible = "ingenic,jz4780-nemc";
>>> - reg = <0x13410000 0x10000>;
>>> - #address-cells = <2>;
>>> +
>>> + ahb2: ahb2 {
>>> + compatible = "simple-bus";
>>
>> This is an unrelated change and should be its own patch.
>
> The efuse register address range is a subset of address range of nemc.
> So decided to make nemc and efuse as nodes with parent node ahb2. This
> is required for efuse driver to work. I am not able to understand what
> you mean by unrelated change. Can you please explain it?
>
>>> + #address-cells = <1>;
>>> #size-cells = <1>;
>>> - ranges = <1 0 0x1b000000 0x1000000
>>> - 2 0 0x1a000000 0x1000000
>>> - 3 0 0x19000000 0x1000000
>>> - 4 0 0x18000000 0x1000000
>>> - 5 0 0x17000000 0x1000000
>>> - 6 0 0x16000000 0x1000000>;
>>> + ranges = <>;
>>> +
>>> + nemc: nemc@13410000 {
>>> + compatible = "ingenic,jz4780-nemc";
>>> + reg = <0x13410000 0x10000>;
>>> + #address-cells = <2>;
>>> + #size-cells = <1>;
>>> + ranges = <1 0 0x1b000000 0x1000000
>>> + 2 0 0x1a000000 0x1000000
>>> + 3 0 0x19000000 0x1000000
>>> + 4 0 0x18000000 0x1000000
>>> + 5 0 0x17000000 0x1000000
>>> + 6 0 0x16000000 0x1000000>;
>>> +
>>> + clocks = <&cgu JZ4780_CLK_NEMC>;
>>> +
>>> + status = "disabled";
>>> + };
>>>
>>> - clocks = <&cgu JZ4780_CLK_NEMC>;
>>> + efuse: efuse@134100d0 {
>>> + compatible = "ingenic,jz4780-efuse";
>>> + reg = <0x134100d0 0xff>;
>>
>> You are creating an overlapping region here with nemc above. Don't do
>> that.
>
> Should "reg = <0x13410000 0x10000>;" be used instead?

No, that still overlaps with nemc. What's in registers 0x00-0xcf and
0x1d0-0xffff? Either get rid of this node altogether and make the
driver for nemc also instantiate the efuse driver (DT is not the only
way to instantiate drivers), or create sub-nodes under nemc for each
distinct h/w block in the 13410000-13420000 address space.

Or a third option is make nemc reg:

reg = <0x13410000 0xd0>, <0x134101d0 0xfe30>;

But I suspect that is wrong and you probably have some other function in there.

Rob

\
 
 \ /
  Last update: 2018-01-14 23:23    [W:0.842 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site