lkml.org 
[lkml]   [2018]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 1/7] ARM: imx: add timer stop flag to ARM power off state
    Date
    When the CPU is in ARM power off state the ARM architected
    timers are stopped. The flag is already present in the higher
    power WAIT mode.

    This allows to use the ARM generic timer on i.MX 6UL/6ULL SoC.
    Without the flag the kernel freezes when the timer enters the
    first time ARM power off mode.

    Note: The default timer on i.MX6SX is the i.MX GPT timer which is
    not disabled during CPU idle. However, the timer is not affected
    by the CPUIDLE_FLAG_TIMER_STOP flag. The flag only affects CPU
    local timers.

    Cc: Anson Huang <anson.huang@nxp.com>
    Signed-off-by: Stefan Agner <stefan@agner.ch>
    Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
    ---
    arch/arm/mach-imx/cpuidle-imx6sx.c | 1 +
    1 file changed, 1 insertion(+)

    diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
    index c5a5c3a70ab1..d0f14b761ff7 100644
    --- a/arch/arm/mach-imx/cpuidle-imx6sx.c
    +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
    @@ -89,6 +89,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
    */
    .exit_latency = 300,
    .target_residency = 500,
    + .flags = CPUIDLE_FLAG_TIMER_STOP,
    .enter = imx6sx_enter_wait,
    .name = "LOW-POWER-IDLE",
    .desc = "ARM power off",
    --
    2.15.1
    \
     
     \ /
      Last update: 2018-01-14 23:22    [W:3.772 / U:0.296 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site