lkml.org 
[lkml]   [2018]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 7/7] ARM: dts: imx6ull: add UART8 support
Date
In i.MX 6ULL UART8 is part of the AIPS-3 memory map instead of
AIPS-1. Clocks and interrupts remain the same.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
---
arch/arm/boot/dts/imx6ull.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index bc2cd4fb8b12..571ddd71cdba 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -43,6 +43,9 @@
#include "imx6ull-pinfunc.h"
#include "imx6ull-pinfunc-snvs.h"

+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+
/ {
soc {
aips3: aips-bus@2200000 {
@@ -56,6 +59,17 @@
compatible = "fsl,imx6ull-iomuxc-snvs";
reg = <0x02290000 0x4000>;
};
+
+ uart8: serial@2288000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x02288000 0x4000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+ <&clks IMX6UL_CLK_UART8_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
};
};
};
--
2.15.1
\
 
 \ /
  Last update: 2018-01-14 23:22    [W:0.044 / U:4.952 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site