lkml.org 
[lkml]   [2018]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Ocfs2-devel] [PATCH v2 2/2] ocfs2: add trimfs lock to avoid duplicated trims in cluster
Hi Changwei,


>>>
> Hi Gang,
>
> On 2017/12/14 13:16, Gang He wrote:
>> As you know, ocfs2 has support trim the underlying disk via
>> fstrim command. But there is a problem, ocfs2 is a shared disk
>> cluster file system, if the user configures a scheduled fstrim
>> job on each file system node, this will trigger multiple nodes
>> trim a shared disk simultaneously, it is very wasteful for CPU
>> and IO consumption, also might negatively affect the lifetime
>> of poor-quality SSD devices.
>> Then, we introduce a trimfs dlm lock to communicate with each
>> other in this case, which will make only one fstrim command to
>> do the trimming on a shared disk among the cluster, the fstrim
>> commands from the other nodes should wait for the first fstrim
>> to finish and returned success directly, to avoid running a the
>> same trim on the shared disk again.
>>
>> Compare with first version, I change the fstrim commands' returned
>> value and behavior in case which meets a fstrim command is running
>> on a shared disk.
>>
>> Signed-off-by: Gang He <ghe@suse.com>
>> ---
>> fs/ocfs2/alloc.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>>
>> diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
>> index ab5105f..5c9c3e2 100644
>> --- a/fs/ocfs2/alloc.c
>> +++ b/fs/ocfs2/alloc.c
>> @@ -7382,6 +7382,7 @@ int ocfs2_trim_fs(struct super_block *sb, struct
> fstrim_range *range)
>> struct buffer_head *gd_bh = NULL;
>> struct ocfs2_dinode *main_bm;
>> struct ocfs2_group_desc *gd = NULL;
>> + struct ocfs2_trim_fs_info info, *pinfo = NULL;
>
> I think *pinfo* is not necessary.
This pointer is necessary, since it can be NULL or non-NULL depend on the code logic.

>>
>> start = range->start >> osb->s_clustersize_bits;
>> len = range->len >> osb->s_clustersize_bits;
>> @@ -7419,6 +7420,42 @@ int ocfs2_trim_fs(struct super_block *sb, struct
> fstrim_range *range)
>>
>> trace_ocfs2_trim_fs(start, len, minlen);
>>
>> + ocfs2_trim_fs_lock_res_init(osb);
>> + ret = ocfs2_trim_fs_lock(osb, NULL, 1);
>
> I don't get why try to lock here and if fails, acquire the same lock again
> later but wait until granted.
Please think about the user case, the patch is only used to handle this case.
When the administer configures a fstrim schedule task on each node, then each node will trigger a fstrim on shared disks concurrently.
In this case, we should avoid duplicated fstrim on a shared disk since this will waste CPU/IO resources and affect SSD lifetime sometimes.
Firstly, we use try_lock to get fstrim dlm lock to identify if there is any other node which is doing fstrim on the disk.
If not, this node is the first one, this node should do fstrim operation on the disk.
If yes, this node is not the first one, this node should wait until the first node is done for fstrim operation, then return the result from DLM lock's value.

> Can it just acquire the _trimfs_ lock as a blocking one directly here?
We can not do a blocking lock directly, since we need to identify if there is any other node has being do fstrim operation when this node start to do fstrim.

>
>> + if (ret < 0) {
>> + if (ret != -EAGAIN) {
>> + mlog_errno(ret);
>> + ocfs2_trim_fs_lock_res_uninit(osb);
>> + goto out_unlock;
>> + }
>> +
>> + mlog(ML_NOTICE, "Wait for trim on device (%s) to "
>> + "finish, which is running from another node.\n",
>> + osb->dev_str);
>> + ret = ocfs2_trim_fs_lock(osb, &info, 0);
>> + if (ret < 0) {
>> + mlog_errno(ret);
>> + ocfs2_trim_fs_lock_res_uninit(osb);
>
> In ocfs2_trim_fs_lock_res_uninit(), you drop lock. But it is never granted.
> Still need to drop lock resource?
Yes, we need to init/uninit fstrim dlm lock resource for each time.
Otherwise, trylock does not work, this is a little different from other dlm lock usage in ocfs2.

>
>> + goto out_unlock;
>> + }
>> +
>> + if (info.tf_valid && info.tf_success &&
>> + info.tf_start == start && info.tf_len == len &&
>> + info.tf_minlen == minlen) {
>> + /* Avoid sending duplicated trim to a shared device */
>> + mlog(ML_NOTICE, "The same trim on device (%s) was "
>> + "just done from node (%u), return.\n",
>> + osb->dev_str, info.tf_nodenum);
>> + range->len = info.tf_trimlen;
>> + goto out_trimunlock;
>> + }
>> + }
>> +
>> + info.tf_nodenum = osb->node_num;
>> + info.tf_start = start;
>> + info.tf_len = len;
>> + info.tf_minlen = minlen;
>
> If we faild during dong trimfs, I think we should not cache above info in
> LVB.
It is necessary, if the second node is waiting the first node, the first node fails to do fstrim,
the first node should update dlm lock's value, then the second node can get the latest dlm lock value (rather than the last time DLM lock value),
the second node will do the fstrim again, since the first node has failed.

> BTW, it seems that this patch is on top of 'try lock' patches which you
> previously sent out.
> Are they related?
try lock patch is related to non-block aio support for ocfs2.

Thanks
Gang
>
> Thanks,
> Changwei
>
>> +
>> /* Determine first and last group to examine based on start and len */
>> first_group = ocfs2_which_cluster_group(main_bm_inode, start);
>> if (first_group == osb->first_cluster_group_blkno)
>> @@ -7463,6 +7500,13 @@ int ocfs2_trim_fs(struct super_block *sb, struct
> fstrim_range *range)
>> group += ocfs2_clusters_to_blocks(sb, osb->bitmap_cpg);
>> }
>> range->len = trimmed * sb->s_blocksize;
>> +
>> + info.tf_trimlen = range->len;
>> + info.tf_success = (ret ? 0 : 1);
>> + pinfo = &info;
>> +out_trimunlock:
>> + ocfs2_trim_fs_unlock(osb, pinfo);
>> + ocfs2_trim_fs_lock_res_uninit(osb);
>> out_unlock:
>> ocfs2_inode_unlock(main_bm_inode, 0);
>> brelse(main_bm_bh);
>>

\
 
 \ /
  Last update: 2018-01-14 23:20    [W:0.305 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site