lkml.org 
[lkml]   [2018]   [Jan]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] extcon: axp288: Redo charger type dection a couple of seconds after probe()
Hi Hans,

s/dection/detection on patch title.

On 2017년 12월 22일 21:36, Hans de Goede wrote:
> The axp288 extcon code depends on other drivers to do things like mux the
> data lines, enable/disable vbus based on the id-pin, etc.
>
> Sometimes the BIOS has not set these things up correctly resulting in the
> initial charger cable type detection giving a wrong result and we end up
> not charging or charging at only 0.5A.
>
> This commit starts a second charger-detection cycle a couple of seconds
> after the first one finishes, giving the other drivers time to load and
> do their thing.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/extcon/extcon-axp288.c | 32 ++++++++++++++++++++++++++++++--
> 1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index 386afb7d1160..cc7c35c7ff02 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -1,6 +1,7 @@
> /*
> * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
> *
> + * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
> * Copyright (C) 2015 Intel Corporation
> * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
> *
> @@ -97,9 +98,11 @@ struct axp288_extcon_info {
> struct device *dev;
> struct regmap *regmap;
> struct regmap_irq_chip_data *regmap_irqc;
> + struct delayed_work det_work;
> int irq[EXTCON_IRQ_END];
> struct extcon_dev *edev;
> unsigned int previous_cable;
> + bool first_detect_done;

The first_detect_done is used only one time in the axp288_handle_chrg_det_event().
The other function don't use it. So, you better to define and use
'static bool first_detect_done' in the axp288_handle_chrg_det_event()
instead of defining the 'first_detect_done' in the struct axp288_extcon_info.

> };
>
> /* Power up/down reason string array */
> @@ -137,6 +140,25 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
> regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
> }
>
> +static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
> +{
> + /*
> + * We depend on other drivers to do things like mux the data lines,
> + * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
> + * not set these things up correctly resulting in the initial charger
> + * cable type detection giving a wrong result and we end up not charging
> + * or charging at only 0.5A.
> + *
> + * So we schedule a second cable type detection after 2 seconds to
> + * give the other drivers time to load and do their thing.
> + */
> + if (!info->first_detect_done) {
> + queue_delayed_work(system_wq, &info->det_work,
> + msecs_to_jiffies(2000));
> + info->first_detect_done = true;
> + }
> +}

The axp288_chrg_detect_complete() is only used in the axp288_handle_chrg_det_event()
and axp288_chrg_detect_complete() is not a complicate. I think that you don't need
to make the separate function. I'd like you to add the

> +
> static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
> {
> int ret, stat, cfg, pwr_stat;
> @@ -201,6 +223,8 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
> info->previous_cable = cable;
> }
>
> + axp288_chrg_detect_complete(info);

As I commented, you better to add the code directly instead of separate function.

> +
> return 0;
>
> dev_det_ret:
> @@ -222,8 +246,11 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> -static void axp288_extcon_enable(struct axp288_extcon_info *info)
> +static void axp288_extcon_det_work(struct work_struct *work)
> {
> + struct axp288_extcon_info *info =
> + container_of(work, struct axp288_extcon_info, det_work.work);
> +
> regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
> BC_GLOBAL_RUN, 0);
> /* Enable the charger detection logic */
> @@ -245,6 +272,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
> info->regmap = axp20x->regmap;
> info->regmap_irqc = axp20x->regmap_irqc;
> info->previous_cable = EXTCON_NONE;
> + INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);
>
> platform_set_drvdata(pdev, info);
>
> @@ -287,7 +315,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
> }
>
> /* Start charger cable type detection */
> - axp288_extcon_enable(info);
> + queue_delayed_work(system_wq, &info->det_work, 0);
>
> return 0;
> }
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2018-01-02 01:55    [W:0.100 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site