lkml.org 
[lkml]   [2017]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 00/10] net: stmmac: dwmac-sun8i: Handle integrated PHY
Date
Hello

The current way to find if the PHY is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the integrated one.

This patchs series adds a new way to find if the PHY is integrated, via
the phy-is-integrated DT property.

Since it exists both integrated and external ethernet-phy@1, they are merged in
the final DTB and so share all properties.
For avoiding this, and better represent the reality, we use a MDIO mux.

The first try was to create a new MDIO mux "mdio-mux-syscon".
mdio-mux-syscon working the same way than mdio-mux-mmioreg with the exception
that the register is used via syscon/regmap.
But this solution does not work for two reason:
- changing the MDIO selection need the reset of MAC which cannot be done by the
mdio-mux-syscon driver
- There were driver loading order problem:
- mdio-mux-syscon needing that stmmac register the parent MDIO
- stmmac needing that child MDIO was registered just after registering parent MDIO

So we cannot use any external MDIO-mux.

The final solution was to represent a mdio-mux and let the MAC handle all things.
Note that phy-is-integrated is still needed (even if we use a MDIO mux) since
some properties apply only on integrated PHY and we need to know the final MDIO
bus in mdio_mux_syscon_switch_fn().

Since DT bits was reverted in 4.13, this patch series include the revert of the revert.
So
- the first four patchs bring back DT/stmmac stuff that was in 4.13 (and reverted)
- fifth patch document how DT MDIO mux is implemented
- patch 6 and 7 modify DT
- patch 8, 9, 10 Modify stmmac according to the new bindings

I have let patch splited for easy review. (for seeing what's new)
But the final serie could have some patch squashed if someone want.
Like squashing patch and 2 and 5 (documentation)

Since DT worked well in 4.13, could it be targeted for 4.14 ?
If necessary I could split this serie in two:
- bring back A64/A83T (patchs 1, 2, 4, 7, 9)
- add MXIO-mux and H3 (patchs 3, 4, 5, 6, 8, 10)

Regards

Changes since v4:
- Update documentation for new bindings
- Added 4 patchs for bring back reverted stuff of 4.13
- dwmac-sun8i now handle mdio-mux
- MDIO use now compatible = "snps,dwmac-mdio";

Changes since v3:
- Added a patch for handling fixed-link
- Updated documentation

Changes since v2:
- Add a MDIO mux for creating distinction between integrated and external MDIO.
- phy-is-integrated is not set in dtsi.

Changes since v1:
- Dropped phy-is-integrated documentation patch since another same patch was already merged
- Moved phy-is-integrated from SoC dtsi to final board DT.


Corentin Labbe (10):
arm64: dts: allwinner: Restore EMAC changes
dt-bindings: net: Restore sun8i dwmac binding
arm: dts: sunxi: Restore EMAC changes
net: stmmac: sun8i: Restore the compatibles
dt-bindings: net: dwmac-sun8i: update documentation about integrated
PHY
ARM: dts: sunxi: h3/h5: represent the mdio switch used by
sun8i-h3-emac
arm64: dts: allwinner: add snps,dwmac-mdio compatible to emac/mdio
net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated
net: stmmac: snps,dwmac-mdio MDIOs are automatically registered
net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs

.../devicetree/bindings/net/dwmac-sun8i.txt | 197 +++++++++++++++++++++
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 9 +
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 19 ++
arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 7 +
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 +
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 +
arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 +
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 22 +++
arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 16 ++
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 46 +++++
.../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 16 ++
.../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 15 ++
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 17 ++
.../dts/allwinner/sun50i-a64-sopine-baseboard.dts | 16 ++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++
.../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts | 17 ++
.../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts | 17 ++
.../dts/allwinner/sun50i-h5-orangepi-prime.dts | 17 ++
drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 140 ++++++++++++---
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 -
22 files changed, 601 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt

--
2.13.5

\
 
 \ /
  Last update: 2017-09-08 09:18    [W:6.061 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site