lkml.org 
[lkml]   [2017]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v4 2/2] arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20
Date
Add nodes of thermal monitor and thermal zone for UniPhier LD20 SoC.
The thermal monitor node is included in sysctrl. Since the efuse might not
have a calibrated value of thermal monitor, this patch gives the default
value for LD20.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 45 ++++++++++++++++++++++++
1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a29c279..59e5ae6 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -7,6 +7,8 @@
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/

+#include <dt-bindings/thermal/thermal.h>
+
/memreserve/ 0x80000000 0x02000000;

/ {
@@ -46,6 +48,7 @@
clocks = <&sys_clk 32>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};

cpu1: cpu@1 {
@@ -64,6 +67,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};

cpu3: cpu@101 {
@@ -173,6 +177,40 @@
<1 10 4>;
};

+ thermal-zones {
+ cpu_thermal {
+ polling-delay-passive = <250>; /* 250ms */
+ polling-delay = <1000>; /* 1000ms */
+ thermal-sensors = <&pvtctl>;
+
+ trips {
+ cpu_crit: cpu_crit {
+ temperature = <110000>; /* 110C */
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ cpu_alert: cpu_alert {
+ temperature = <100000>; /* 100C */
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu2
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -410,6 +448,13 @@
watchdog {
compatible = "socionext,uniphier-wdt";
};
+
+ pvtctl: pvtctl {
+ compatible = "socionext,uniphier-ld20-thermal";
+ interrupts = <0 3 4>;
+ #thermal-sensor-cells = <0>;
+ socionext,tmod-calibration = <0x0f22 0x68ee>;
+ };
};

nand: nand@68000000 {
--
2.7.4
\
 
 \ /
  Last update: 2017-09-04 08:59    [W:0.784 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site