lkml.org 
[lkml]   [2017]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: Fix legacy IRQ assignment execution stage
On Thu, Sep 28, 2017 at 05:37:19PM -0500, Bjorn Helgaas wrote:
> On Thu, Sep 28, 2017 at 12:37:07PM +0100, Lorenzo Pieralisi wrote:
> > Through struct pci_host_bridge->{map/swizzle}_irq() hooks is now
> > possible to define IRQ mapping functions on a per PCI host bridge basis.
> >
> > Actual IRQ allocation is carried out by the pci_assign_irq() function in
> > pci_device_probe() - to make sure a device is assigned an IRQ only if it
> > is probed (ie match a driver); it retrieves a struct pci_host_bridge*
> > for a given PCI device and through {map/swizzle}_irq() hooks it carries
> > out the PCI IRQ allocation.
> >
> > As it turned out, some legacy drivers (eg IDE layer) require that a
> > device allocates IRQ as soon as it is added so that its actual IRQ
> > settings are available early in the boot process. With current code
> > calling pci_assign_irq() in pci_device_probe() IDE IRQ probing fails
> > for some drivers:
>
> I think the patch is fine, but I don't understand the changelog. I
> want to know specifically what the dependency on dev->irq is. "Early
> in the boot process" is pretty vague.

I agree with you Bjorn and I also agree that this fix does not
explain what the problem really is so it is not actually fixing
anything.

> I *thought* we were doing something like this:
>
> pci_device_probe(dev1)
> pci_assign_irq(dev1)
> ...
> ide_pci_init_two(dev1, dev2, ...)
> do_ide_setup_pci_device(dev1)
> pciirq = dev1->irq # this one is fine
> do_ide_setup_pci_device(dev2)
> pciirq = dev2->irq # not fine
>
> where the problem is that we haven't called pci_assign_irq(dev2), so
> dev2->irq hasn't been set.
>
> But that doesn't match the data because we should be coming through
> cmd64x_init_one(), which calls ide_pci_init_one(), so we shouldn't
> have a dev2 in this path.

That's my understanding too and pci_assign_irq() should have been called
for dev1 (and failed) by then, why calling it again succeeds is not
clear to me.

There is something I am missing here which is not obvious, I need
more data to debug this, I will try to replicate Guenter's setup.

Thanks,
Lorenzo

> > ide0: disabled, no IRQ
> > ide0: failed to initialize IDE interface
> > ide0: disabling port
> > cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> > CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
> > cmd64x 0000:00:02.0: can't reserve resources
> > CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
> > ide_generic: please use "probe_mask=0x3f" module parameter for probing
> > all legacy ISA IDE ports
> > ------------[ cut here ]------------
> > WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
> > sysfs: cannot create duplicate filename '/class/ide_port/ide0'
> > ...
> >
> > Trace:
> > [<fffffc00003308a0>] __warn+0x160/0x190
> > [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> > [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
> > [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> > [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
> > [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> > [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> > [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
> > [<fffffc00005b9d64>] device_add+0x2a4/0x7c0
> > [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
> > [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
> > [<fffffc00005ba690>] device_create+0x50/0x70
> > [<fffffc00005df36c>] ide_host_register+0x48c/0xa00
> > [<fffffc00005df330>] ide_host_register+0x450/0xa00
> > [<fffffc00005ba2a0>] device_register+0x20/0x50
> > [<fffffc00005df330>] ide_host_register+0x450/0xa00
> > [<fffffc00005df944>] ide_host_add+0x64/0xe0
> > [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
> > [<fffffc0000310288>] do_one_initcall+0x68/0x260
> > [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
> > [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> > [<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
> > [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> >
> > ---[ end trace 24a70433c3e4d374 ]---
> > ide0: disabling port
> >
> > Fix the IRQ allocation issue by moving the pci_assign_irq() call from
> > pci_device_probe() to pci_device_add(), so that IRQs for a given PCI
> > device are allocated as soon as it is scanned by the PCI enumeration.
> >
> > This has the drawback of allocating an IRQ even for PCI devices that
> > do not have a matching kernel driver but it should be safe to carry
> > out in all configurations.
> >
> > Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
> > pci_device_probe()")
> > Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > Reported-by: Guenter Roeck <linux@roeck-us.net>
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Richard Henderson <rth@twiddle.net>
> > Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
> > Cc: David S. Miller <davem@davemloft.net>
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > Cc: Matt Turner <mattst88@gmail.com>
> > ---
> > drivers/pci/pci-driver.c | 2 --
> > drivers/pci/probe.c | 3 +++
> > 2 files changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> > index 11bd267..750d688 100644
> > --- a/drivers/pci/pci-driver.c
> > +++ b/drivers/pci/pci-driver.c
> > @@ -415,8 +415,6 @@ static int pci_device_probe(struct device *dev)
> > struct pci_dev *pci_dev = to_pci_dev(dev);
> > struct pci_driver *drv = to_pci_driver(dev->driver);
> >
> > - pci_assign_irq(pci_dev);
> > -
> > error = pcibios_alloc_irq(pci_dev);
> > if (error < 0)
> > return error;
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index ff94b69..ba4e466 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -2103,6 +2103,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> > /* Initialize various capabilities */
> > pci_init_capabilities(dev);
> >
> > + /* Assign device IRQ number */
>
> Pointless comment (as is the existing capabilities one above).
>
> > + pci_assign_irq(dev);
> > +
> > /*
> > * Add the device to our list of discovered devices
> > * and the bus list for fixup functions, etc.
> > --
> > 2.4.12
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2017-09-29 15:23    [W:0.078 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site