lkml.org 
[lkml]   [2017]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 3/3] usb: dwc3: core: Notify current USB mode to USB3 PHY as well
Date
Driver currently notifies only USB2 PHY on USB mode change.
Extend this to USB3 PHY so that PHY drivers based on the
mode can release system resources - clocks, regulators etc.
Additionally Qualcomm QMP and QUSB2 PHY drivers need to
override VBUS signal in PHY wrapper in device mode as USB
VBUS line is not connected to PHYs. Also, remove NULL checks
for PHY when calling phy_set_mode as PHY ops already check this.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
drivers/usb/dwc3/core.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 23bb192..dabfa16 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -156,9 +156,8 @@ static void __dwc3_set_mode(struct work_struct *work)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
-
+ phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -166,8 +165,8 @@ static void __dwc3_set_mode(struct work_struct *work)

if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);

ret = dwc3_gadget_init(dwc);
if (ret)
@@ -932,8 +931,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)

if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);

ret = dwc3_gadget_init(dwc);
if (ret) {
@@ -948,8 +947,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)

if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);

ret = dwc3_host_init(dwc);
if (ret) {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2017-09-27 13:20    [W:0.136 / U:1.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site