lkml.org 
[lkml]   [2017]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] ufs/phy: qcom: Refactor to use phy_init call
Hi Vivek,

Please find one comment inline below, rest look good.

Regards,
Subhash

On 2017-08-03 23:48, Vivek Gautam wrote:
> Refactor ufs_qcom_power_up_sequence() to get rid of ugly
> exported phy APIs and use the phy_init() and phy_power_on()
> to do the phy initialization.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
> drivers/phy/qualcomm/phy-qcom-ufs-i.h | 2 --
> drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 9 +++++--
> drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 9 +++++--
> drivers/phy/qualcomm/phy-qcom-ufs.c | 38
> ++++++++--------------------
> drivers/scsi/ufs/ufs-qcom.c | 36
> ++++++++++----------------
> include/linux/phy/phy-qcom-ufs.h | 3 ---
> 6 files changed, 38 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> index 94326ed107c3..495fd5941231 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> @@ -123,7 +123,6 @@ struct ufs_qcom_phy {
> * struct ufs_qcom_phy_specific_ops - set of pointers to functions
> which have a
> * specific implementation per phy. Each UFS phy, should implement
> * those functions according to its spec and requirements
> - * @calibrate_phy: pointer to a function that calibrate the phy
> * @start_serdes: pointer to a function that starts the serdes
> * @is_physical_coding_sublayer_ready: pointer to a function that
> * checks pcs readiness. returns 0 for success and non-zero for error.
> @@ -132,7 +131,6 @@ struct ufs_qcom_phy {
> * and writes to QSERDES_RX_SIGDET_CNTRL attribute
> */
> struct ufs_qcom_phy_specific_ops {
> - int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
> void (*start_serdes)(struct ufs_qcom_phy *phy);
> int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
> void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> index af65785230b5..c39440b56b6d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> @@ -44,7 +44,13 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct
> ufs_qcom_phy *phy_common)
>
> static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
> {
> - return 0;
> + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
> + bool is_rate_B = false;
> +
> + if (phy_common->mode == PHY_MODE_UFS_HS_B)
> + is_rate_B = true;
> +
> + return ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
> }
>
> static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
> @@ -120,7 +126,6 @@ static int
> ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
> };
>
> static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
> - .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate,
> .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
> .is_physical_coding_sublayer_ready =
> ufs_qcom_phy_qmp_14nm_is_pcs_ready,
> .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> index 5c18c41dbdb4..5705a2d4c6d2 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> @@ -63,7 +63,13 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct
> ufs_qcom_phy *phy_common)
>
> static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
> {
> - return 0;
> + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
> + bool is_rate_B = false;
> +
> + if (phy_common->mode == PHY_MODE_UFS_HS_B)
> + is_rate_B = true;
> +
> + return ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
> }
>
> static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
> @@ -178,7 +184,6 @@ static int
> ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
> };
>
> static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
> - .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate,
> .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
> .is_physical_coding_sublayer_ready =
> ufs_qcom_phy_qmp_20nm_is_pcs_ready,
> .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c
> b/drivers/phy/qualcomm/phy-qcom-ufs.c
> index 43865ef340e2..1febe3294fe3 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
> @@ -518,9 +518,8 @@ void ufs_qcom_phy_disable_iface_clk(struct
> ufs_qcom_phy *phy)
> }
> }
>
> -int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
> +static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy
> *ufs_qcom_phy)
> {
> - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> int ret = 0;
>
> if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
> @@ -533,7 +532,6 @@ int ufs_qcom_phy_start_serdes(struct phy
> *generic_phy)
>
> return ret;
> }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
>
> int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32
> tx_lanes)
> {
> @@ -564,31 +562,8 @@ void ufs_qcom_phy_save_controller_version(struct
> phy *generic_phy,
> }
> EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
>
> -int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool
> is_rate_B)
> -{
> - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> - int ret = 0;
> -
> - if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
> - dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not
> supported\n",
> - __func__);
> - ret = -ENOTSUPP;
> - } else {
> - ret = ufs_qcom_phy->phy_spec_ops->
> - calibrate_phy(ufs_qcom_phy, is_rate_B);
> - if (ret)
> - dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
> - __func__, ret);
> - }
> -
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
> -
> -int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
> +static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy
> *ufs_qcom_phy)
> {
> - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> -
> if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
> dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready()
> callback is not supported\n",
> __func__);
> @@ -598,7 +573,6 @@ int ufs_qcom_phy_is_pcs_ready(struct phy
> *generic_phy)
> return ufs_qcom_phy->phy_spec_ops->
> is_physical_coding_sublayer_ready(ufs_qcom_phy);
> }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
>
> int ufs_qcom_phy_power_on(struct phy *generic_phy)
> {
> @@ -609,6 +583,14 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
> if (phy_common->is_powered_on)
> return 0;
>
> + err = ufs_qcom_phy_start_serdes(phy_common);
> + if (err)
> + return err;
> +
> + err = ufs_qcom_phy_is_pcs_ready(phy_common);
> + if (err)
> + return err;
> +

Now that we are doing serdes start (and checking the PCS ready), I am
not sure we can call phy_power_on() from ufs_qcom_resume(). Please
check.


> err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
> if (err) {
> dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 44c21d5818ee..890eafeb8ad4 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -281,10 +281,10 @@ static int ufs_qcom_power_up_sequence(struct
> ufs_hba *hba)
> /* provide 1ms delay to let the reset pulse propagate */
> usleep_range(1000, 1100);
>
> - ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
> -
> + /* phy initialization - calibrate the phy */
> + ret = phy_init(phy);
> if (ret) {
> - dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret =
> %d\n",
> + dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
> __func__, ret);
> goto out;
> }
> @@ -297,21 +297,22 @@ static int ufs_qcom_power_up_sequence(struct
> ufs_hba *hba)
> * voltage, current to settle down before starting serdes.
> */
> usleep_range(1000, 1100);
> - ret = ufs_qcom_phy_start_serdes(phy);
> +
> + /* power on phy - start serdes and phy's power and clocks */
> + ret = phy_power_on(phy);
> if (ret) {
> - dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret =
> %d\n",
> + dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
> __func__, ret);
> - goto out;
> + goto out_disable_phy;
> }
>
> - ret = ufs_qcom_phy_is_pcs_ready(phy);
> - if (ret)
> - dev_err(hba->dev,
> - "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
> - __func__, ret);
> -
> ufs_qcom_select_unipro_mode(host);
>
> + return 0;
> +
> +out_disable_phy:
> + ufs_qcom_assert_reset(hba);
> + phy_exit(phy);
> out:
> return ret;
> }
> @@ -1276,14 +1277,9 @@ static int ufs_qcom_init(struct ufs_hba *hba)
> ufs_qcom_phy_save_controller_version(host->generic_phy,
> host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
>
> - phy_init(host->generic_phy);
> - err = phy_power_on(host->generic_phy);
> - if (err)
> - goto out_unregister_bus;
> -
> err = ufs_qcom_init_lane_clks(host);
> if (err)
> - goto out_disable_phy;
> + goto out_variant_clear;
>
> ufs_qcom_set_caps(hba);
> ufs_qcom_advertise_quirks(hba);
> @@ -1304,10 +1300,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>
> goto out;
>
> -out_disable_phy:
> - phy_power_off(host->generic_phy);
> -out_unregister_bus:
> - phy_exit(host->generic_phy);
> out_variant_clear:
> ufshcd_set_variant(hba, NULL);
> out:
> diff --git a/include/linux/phy/phy-qcom-ufs.h
> b/include/linux/phy/phy-qcom-ufs.h
> index 35c070ea6ea3..0a2c18a9771d 100644
> --- a/include/linux/phy/phy-qcom-ufs.h
> +++ b/include/linux/phy/phy-qcom-ufs.h
> @@ -31,10 +31,7 @@
> */
> void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
>
> -int ufs_qcom_phy_start_serdes(struct phy *phy);
> int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
> -int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
> -int ufs_qcom_phy_is_pcs_ready(struct phy *phy);
> void ufs_qcom_phy_save_controller_version(struct phy *phy,
> u8 major, u16 minor, u16 step);

--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2017-09-27 01:15    [W:0.136 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site