Messages in this thread | | | Subject | Re: [PATCH 1/2] arm: dts: Add support for National Instruments Project Sulfur SDRs | From | Michal Simek <> | Date | Mon, 25 Sep 2017 10:19:44 +0200 |
| |
Hi Moritz
sorry for delay.
On 12.9.2017 01:22, Moritz Fischer wrote: > Add support for the National Instruments Project Sulfur SDR > motherboards Rev 2,3 and 4. > > Signed-off-by: Moritz Fischer <mdf@kernel.org> > --- > arch/arm/boot/dts/Makefile | 3 + > arch/arm/boot/dts/zynq-ni-sulfur-rev2.dts | 84 +++++++++++++++++++ > arch/arm/boot/dts/zynq-ni-sulfur-rev3.dts | 118 ++++++++++++++++++++++++++ > arch/arm/boot/dts/zynq-ni-sulfur-rev4.dts | 26 ++++++ > arch/arm/boot/dts/zynq-ni-sulfur.dtsi | 133 ++++++++++++++++++++++++++++++ > 5 files changed, 364 insertions(+) > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur-rev2.dts > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur-rev3.dts > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur-rev4.dts > create mode 100644 arch/arm/boot/dts/zynq-ni-sulfur.dtsi
Is this publicly available board?
I am not quite sure we should apply these dts files. There are a lot of boards with zynq and there must be any strong argument for applying this to the tree. For arm32 with even flat tree structure.
Arnd: Do you have any policy about it?
Thanks, Michal
| |