lkml.org 
[lkml]   [2017]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] [PATCH 2/3] arm64: allwinner: a64: add CPU opp table
From
Date
Hello,

On 09/22/17 19:15, Icenowy Zheng wrote:
> Add the operating table for the CPU (ARM cores) on Allwinner A64 SoC.
>
> OPPs higher to 816MHz is temporarily dropped, to prevent overheat on
> boards with AXP803 support and undervoltage on boards without AXP803
> support.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 20aba7b186aa..0532da4939eb 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -52,6 +52,23 @@
> #address-cells = <1>;
> #size-cells = <1>;
>
> + cpu0_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-648000000 {
> + opp-hz = /bits/ 64 <648000000>;
> + opp-microvolt = <1040000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +
> + opp-816000000 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <1100000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + };
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -61,6 +78,10 @@
> device_type = "cpu";
> reg = <0>;
> enable-method = "psci";
> + clocks = <&ccu CLK_CPUX>;
CLK_CPUX is not currently exposed in the dt-bindings header, so this
doesn't compile.

> + clock-names = "cpu";
> + operating-points-v2 = <&cpu0_opp_table>;
> + #cooling-cells = <2>;
> };
>
> cpu1: cpu@1 {
> @@ -68,6 +89,7 @@
> device_type = "cpu";
> reg = <1>;
> enable-method = "psci";
> + operating-points-v2 = <&cpu0_opp_table>;
> };
>
> cpu2: cpu@2 {
> @@ -75,6 +97,7 @@
> device_type = "cpu";
> reg = <2>;
> enable-method = "psci";
> + operating-points-v2 = <&cpu0_opp_table>;
> };
>
> cpu3: cpu@3 {
> @@ -82,6 +105,7 @@
> device_type = "cpu";
> reg = <3>;
> enable-method = "psci";
> + operating-points-v2 = <&cpu0_opp_table>;
> };
> };
>
>

Thanks,
Samuel

\
 
 \ /
  Last update: 2017-09-25 19:39    [W:0.095 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site