lkml.org 
[lkml]   [2017]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 04/12] ARM: dts: nanopi: Fix node with unit name and no reg property
Date
This patch fix the warning "xxx has a unit name, but no reg property" by
removing "@0" from such node.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun8i-h3-nanopi.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index c6decee41a27..7646e331bd29 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -81,7 +81,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sw_r_npi>;

- k1@0 {
+ k1 {
label = "k1";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -108,19 +108,19 @@
};

&pio {
- leds_npi: led_pins@0 {
+ leds_npi: led_pins {
pins = "PA10";
function = "gpio_out";
};
};

&r_pio {
- leds_r_npi: led_pins@0 {
+ leds_r_npi: led_pins {
pins = "PL10";
function = "gpio_out";
};

- sw_r_npi: key_pins@0 {
+ sw_r_npi: key_pins {
pins = "PL3";
function = "gpio_in";
};
--
2.13.5
\
 
 \ /
  Last update: 2017-09-22 20:47    [W:0.113 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site