lkml.org 
[lkml]   [2017]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pinctrl: intel: Mask interrupts on driver probe
On Fri, Sep 22, 2017 at 08:47:12AM +0300, Mika Westerberg wrote:
> On Thu, Sep 21, 2017 at 02:20:03PM -0500, Kyle Roeschley wrote:
> > Powering off the system on Apollo Lake does not clear the interrupt
> > enable registers for the GPIOs. To avoid an interrupt storm on driver
> > probe, clear all interrupt enables before enabling our interrupt line.
>
> It is up to the BIOS to set the proper mask and program the pads
> accordingly. Which platform and BIOS this is?
>
> I would rather not do this because it might cause other problems.

I haven't seen any issues in testing. This is on a platform based on the Oxbow
Hill CRB, but it's entirely possible that there's a bug in the BIOS power
sequencing behavior. I'll dig around and see if something's been missed.

--
Kyle Roeschley
Software Engineer
National Instruments

\
 
 \ /
  Last update: 2017-09-22 16:09    [W:0.178 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site