lkml.org 
[lkml]   [2017]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RESEND 1/2] phy: phy-mtk-tphy: fix NULL point of chip bank
From
Date
On Thu, 2017-09-21 at 16:23 +0530, Kishon Vijay Abraham I wrote:
>
> On Thursday 21 September 2017 04:01 PM, Chunfeng Yun wrote:
> > Chip bank of version-1 is initialized as NULL, but it's used
> > by pcie_phy_instance_power_on/off(), so assign it a right
> > address.
>
> merged. How was this not noticed before?

The PCIe function was tested on mt2712 with tphy-v2, and didn't notice
this issue until tested it on mt7622 with tphy-v1.

Ashamed of myself for making such a rookie mistake.
>
> Thanks
> Kishon
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > drivers/phy/mediatek/phy-mtk-tphy.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> > index e3baad7..721a2a1 100644
> > --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> > +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> > @@ -27,6 +27,7 @@
> > /* banks shared by multiple phys */
> > #define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
> > #define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
> > +#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */
> > /* u2 phy bank */
> > #define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
> > /* u3/pcie/sata phy banks */
> > @@ -762,7 +763,7 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy,
> > case PHY_TYPE_USB3:
> > case PHY_TYPE_PCIE:
> > u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
> > - u3_banks->chip = NULL;
> > + u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
> > u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
> > u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
> > break;
> >


\
 
 \ /
  Last update: 2017-09-22 03:15    [W:0.045 / U:11.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site