lkml.org 
[lkml]   [2017]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 07/22] fpga: intel: pcie: parse feature list and create platform device for features.
)On Wed, Sep 20, 2017 at 4:24 PM, Alan Tull <atull@kernel.org> wrote:

Hi Hao,

A few more minor things below.

> a (wh., *()On Sun, Jun 25, 2017 at 8:52 PM, Wu Hao <hao.wu@intel.com> wrote:
>
> Hi Hao,
>
> I'm done with some board bringup so I have time to look at your patchset again.
>
> Something I can't help but notice is that this patchset will be almost
> completely reusable for embedded FPGAs if the enumeration is separated
> from the pcie code. After the devices are created, they are just mmio
> devices. That makes this whole scheme available for embedded FPGAs.
>
> The division of things would be that the pcie code would read the
> headers and do ioremapping. Then pass the headers to the enumeration
> code to create the devices. With that division, another platform that
> is embedded could have its own code that read the headers and did the
> iomapping and then used the separate enumeration code.
>
> Going through intel-pcie.c, the truly pcie specific parts are already
> pretty well contained. The pcie code is in probe,
> cci_pci_ioremap_bar, cci_pci_release_regions, and the 'parse_s*'
> functions that ultimately call cci_pci_ioremap_bar. So it all comes
> down to the code that calls the 'parse_s*' functions. That is, the
> code the reads the fme header and the port headers. Currently, if I'm
> reading this right, this code ioremaps each region, reads its header,
> and creates its device before reading the next header. So we just
> need to change the order a little and ioremap/read all the headers
> before starting to create devices. That separates the pci ioremap
> from creating the devices. So the probe function could ioremap and
> read in the fme header. Then it would ioremap and read in each of the
> port headers. After they are read in, then pass the all these headers
> to the separate enumeration code that will parse it and create the
> devices. That part is not pcie specific, right? With the enumeration
> code in a separate file (and assuming that the ioremap has already
> happened), another platform that is embedded could have its probe do
> the iomapping and reading the headers, and then call the same
> enumeration code.
>
> Actually, there's a bit more to it than that but I think this is
> doable. build_info_add_sub_feature() (which is called by
> create_feature_instance) saves off resource info for each sub device.
> Does this mean this code is ioremapping again (in
> intel-fpga-fme-mgr.c's probe)?
>
> A few more things below...
>
>> From: Xiao Guangrong <guangrong.xiao@linux.intel.com>
>>
>> Device Feature List structure creates a link list of feature headers
>> within the MMIO space to provide an extensible way of adding features.
>>
>> The Intel FPGA PCIe driver walks through the feature headers to enumerate
>> feature devices, FPGA Management Engine (FME) and FPGA Port for Accelerated
>> Function Unit (AFU), and their private sub features. For feature devices,
>> it creates the platform devices and linked the private sub features into
>> their platform data.
>>
>> Signed-off-by: Tim Whisonant <tim.whisonant@intel.com>
>> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com>
>> Signed-off-by: Shiva Rao <shiva.rao@intel.com>
>> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com>
>> Signed-off-by: Kang Luwei <luwei.kang@intel.com>
>> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com>
>> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
>> Signed-off-by: Wu Hao <hao.wu@intel.com>
>> ---
>> v2: moved the code to drivers/fpga folder as suggested by Alan Tull.
>> switched to GPLv2 license.
>> fixed comments from Moritz Fischer.
>> fixed kbuild warning, typos and clean up the code.
>> ---
>> drivers/fpga/Makefile | 2 +-
>> drivers/fpga/intel-feature-dev.c | 130 ++++++
>> drivers/fpga/intel-feature-dev.h | 341 ++++++++++++++++
>> drivers/fpga/intel-pcie.c | 841 ++++++++++++++++++++++++++++++++++++++-
>> 4 files changed, 1311 insertions(+), 3 deletions(-)
>> create mode 100644 drivers/fpga/intel-feature-dev.c
>> create mode 100644 drivers/fpga/intel-feature-dev.h
>>
>> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
>> index 5613133..ad24b3d 100644
>> --- a/drivers/fpga/Makefile
>> +++ b/drivers/fpga/Makefile
>> @@ -31,4 +31,4 @@ obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o
>> # Intel FPGA Support
>> obj-$(CONFIG_INTEL_FPGA_PCI) += intel-fpga-pci.o
>>
>> -intel-fpga-pci-objs := intel-pcie.o
>> +intel-fpga-pci-objs := intel-pcie.o intel-feature-dev.o
>> diff --git a/drivers/fpga/intel-feature-dev.c b/drivers/fpga/intel-feature-dev.c
>> new file mode 100644
>> index 0000000..68f9cba
>> --- /dev/null
>> +++ b/drivers/fpga/intel-feature-dev.c
>> @@ -0,0 +1,130 @@
>> +/*
>> + * Intel FPGA Feature Device Driver
>> + *
>> + * Copyright (C) 2017 Intel Corporation, Inc.
>> + *
>> + * Authors:
>> + * Kang Luwei <luwei.kang@intel.com>
>> + * Zhang Yi <yi.z.zhang@intel.com>
>> + * Wu Hao <hao.wu@intel.com>
>> + * Xiao Guangrong <guangrong.xiao@linux.intel.com>
>> + *
>> + * This work is licensed under the terms of the GNU GPL version 2. See
>> + * the COPYING file in the top-level directory.
>> + */
>> +
>> +#include "intel-feature-dev.h"
>> +
>> +void feature_platform_data_add(struct feature_platform_data *pdata,
>> + int index, const char *name,
>> + int resource_index, void __iomem *ioaddr)
>> +{
>> + WARN_ON(index >= pdata->num);
>> +
>> + pdata->features[index].name = name;
>> + pdata->features[index].resource_index = resource_index;
>> + pdata->features[index].ioaddr = ioaddr;
>> +}

This function is only called once. I understand that it is desirable
to break things up into little functions and avoid overly long
functions, but in this case, the calling function
(build_info_add_sub_feature) is pretty short to begin with. Someone
reading the code will know what is happening better if you just add
its contents to its calling function.

>> +
>> +struct feature_platform_data *
>> +feature_platform_data_alloc_and_init(struct platform_device *dev, int num)
>> +{
>> + struct feature_platform_data *pdata;
>> +
>> + pdata = kzalloc(feature_platform_data_size(num), GFP_KERNEL);
>> + if (pdata) {
>> + pdata->dev = dev;
>> + pdata->num = num;
>> + mutex_init(&pdata->lock);
>> + }
>> +
>> + return pdata;
>> +}

feature_platform_data_alloc_and_init is another function that's small,
called once, and would be better included in its caller.

>> +
>> +int fme_feature_num(void)
>> +{
>> + return FME_FEATURE_ID_MAX;
>> +}
>> +
>> +int port_feature_num(void)
>> +{
>> + return PORT_FEATURE_ID_MAX;
>> +}
>
> Do these need to be functions? If so, static. But if you can just
> use the #define'd values that's one level of indirection we can get
> rid of. And when I'm going through code where there's extra levels of
> indirection that don't do anything, it makes it harder to understand
> ;)
>
>> +
>> +int fpga_port_id(struct platform_device *pdev)
>> +{
>> + struct feature_port_header *port_hdr;
>> + struct feature_port_capability capability;
>> +
>> + port_hdr = get_feature_ioaddr_by_index(&pdev->dev,
>> + PORT_FEATURE_ID_HEADER);
>> + WARN_ON(!port_hdr);
>> +
>> + capability.csr = readq(&port_hdr->capability);
>> + return capability.port_number;
>> +}
>> +EXPORT_SYMBOL_GPL(fpga_port_id);
>
> This is here because every feature is a port, right?
>
>> +
>> +/*
>> + * Enable Port by clear the port soft reset bit, which is set by default.
>> + * The User AFU is unable to respond to any MMIO access while in reset.
>> + * __fpga_port_enable function should only be used after __fpga_port_disable
>> + * function.
>> + */
>> +void __fpga_port_enable(struct platform_device *pdev)
>> +{
>> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
>> + struct feature_port_header *port_hdr;
>> + struct feature_port_control control;
>> +
>> + WARN_ON(!pdata->disable_count);
>> +
>> + if (--pdata->disable_count != 0)
>> + return;
>> +
>> + port_hdr = get_feature_ioaddr_by_index(&pdev->dev,
>> + PORT_FEATURE_ID_HEADER);
>> + WARN_ON(!port_hdr);
>> +
>> + control.csr = readq(&port_hdr->control);
>> + control.port_sftrst = 0x0;
>> + writeq(control.csr, &port_hdr->control);
>> +}
>> +EXPORT_SYMBOL_GPL(__fpga_port_enable);
>> +
>> +#define RST_POLL_INVL 10 /* us */
>> +#define RST_POLL_TIMEOUT 1000 /* us */
>> +
>> +int __fpga_port_disable(struct platform_device *pdev)
>> +{
>> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
>> + struct feature_port_header *port_hdr;
>> + struct feature_port_control control;
>> +
>> + if (pdata->disable_count++ != 0)
>> + return 0;
>> +
>> + port_hdr = get_feature_ioaddr_by_index(&pdev->dev,
>> + PORT_FEATURE_ID_HEADER);
>> + WARN_ON(!port_hdr);
>> +
>> + /* Set port soft reset */
>> + control.csr = readq(&port_hdr->control);
>> + control.port_sftrst = 0x1;
>> + writeq(control.csr, &port_hdr->control);
>> +
>> + /*
>> + * HW sets ack bit to 1 when all outstanding requests have been drained
>> + * on this port and minimum soft reset pulse width has elapsed.
>> + * Driver polls port_soft_reset_ack to determine if reset done by HW.
>> + */
>> + if (readq_poll_timeout(&port_hdr->control, control.csr,
>> + (control.port_sftrst_ack == 1),
>> + RST_POLL_INVL, RST_POLL_TIMEOUT)) {
>> + dev_err(&pdev->dev, "timeout, fail to reset device\n");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(__fpga_port_disable);
>> diff --git a/drivers/fpga/intel-feature-dev.h b/drivers/fpga/intel-feature-dev.h
>> new file mode 100644
>> index 0000000..f67784a
>> --- /dev/null
>> +++ b/drivers/fpga/intel-feature-dev.h
>> @@ -0,0 +1,341 @@
>> +/*
>> + * Intel FPGA Feature Device Driver Header File
>> + *
>> + * Copyright (C) 2017 Intel Corporation, Inc.
>> + *
>> + * Authors:
>> + * Kang Luwei <luwei.kang@intel.com>
>> + * Zhang Yi <yi.z.zhang@intel.com>
>> + * Wu Hao <hao.wu@intel.com>
>> + * Xiao Guangrong <guangrong.xiao@linux.intel.com>
>> + *
>> + * This work is licensed under the terms of the GNU GPL version 2. See
>> + * the COPYING file in the top-level directory.
>> + */
>> +
>> +#ifndef __INTEL_FPGA_FEATURE_H
>> +#define __INTEL_FPGA_FEATURE_H
>> +
>> +#include <linux/fs.h>
>> +#include <linux/pci.h>
>> +#include <linux/uuid.h>
>> +#include <linux/delay.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/platform_device.h>
>> +
>> +#ifndef readq
>> +static inline u64 readq(void __iomem *addr)
>> +{
>> + return readl(addr) + ((u64)readl(addr + 4) << 32);
>> +}
>> +#endif
>> +
>> +#ifndef writeq
>> +static inline void writeq(u64 val, void __iomem *addr)
>> +{
>> + writel((u32) (val), addr);
>> + writel((u32) (val >> 32), (addr + 4));
>> +}
>> +#endif
>> +
>> +/* maximum supported number of ports */
>> +#define MAX_FPGA_PORT_NUM 4
>> +/* plus one for fme device */
>> +#define MAX_FEATURE_DEV_NUM (MAX_FPGA_PORT_NUM + 1)
>> +
>> +#define FME_FEATURE_HEADER "fme_hdr"
>> +#define FME_FEATURE_THERMAL_MGMT "fme_thermal"
>> +#define FME_FEATURE_POWER_MGMT "fme_power"
>> +#define FME_FEATURE_GLOBAL_PERF "fme_gperf"
>> +#define FME_FEATURE_GLOBAL_ERR "fme_error"
>> +#define FME_FEATURE_PR_MGMT "fme_pr"
>> +
>> +#define PORT_FEATURE_HEADER "port_hdr"
>> +#define PORT_FEATURE_UAFU "port_uafu"
>> +#define PORT_FEATURE_ERR "port_err"
>> +#define PORT_FEATURE_UMSG "port_umsg"
>> +#define PORT_FEATURE_PR "port_pr"
>> +#define PORT_FEATURE_STP "port_stp"
>> +
>> +/* All headers and structures must be byte-packed to match the spec. */
>> +#pragma pack(1)
>> +
>> +/* common header for all features */
>> +struct feature_header {
>> + union {
>> + u64 csr;
>> + struct {
>> + u64 id:12;
>> + u64 revision:4;
>> + u64 next_header_offset:24; /* offset to next header */
>> + u64 rsvdz:20;
>> + u64 type:4; /* feature type */
>> +#define FEATURE_TYPE_AFU 0x1
>> +#define FEATURE_TYPE_PRIVATE 0x3
>> + };
>> + };
>> +};
>> +
>> +/* common header for non-private features */
>> +struct feature_afu_header {
>> + uuid_le guid;
>> + union {
>> + u64 csr;
>> + struct {
>> + u64 next_afu:24; /* pointer to next afu header */
>> + u64 rsvdz:40;
>> + };
>> + };
>> +};
>> +
>> +/* FME Header Register Set */
>> +/* FME Capability Register */
>> +struct feature_fme_capability {
>> + union {
>> + u64 csr;
>> + struct {
>> + u64 fabric_verid:8; /* Fabric version ID */
>> + u64 socket_id:1; /* Socket id */
>> + u64 rsvdz1:3;
>> + u64 pcie0_link_avl:1; /* PCIe0 link availability */
>> + u64 pcie1_link_avl:1; /* PCIe1 link availability */
>> + u64 coherent_link_avl:1;/* Coherent link availability */
>> + u64 rsvdz2:1;
>> + u64 iommu_support:1; /* IOMMU or VT-d supported */
>> + u64 num_ports:3; /* Num of ports implemented */
>> + u64 rsvdz3:4;
>> + u64 addr_width_bits:6; /* Address width supported */
>> + u64 rsvdz4:2;
>> + u64 cache_size:12; /* Cache size in kb */
>> + u64 cache_assoc:4; /* Cache Associativity */
>> + u64 rsvdz5:15;
>> + u64 lock_bit:1; /* Latched lock bit by BIOS */
>> + };
>> + };
>> +};
>> +
>> +/* FME Port Offset Register */
>> +struct feature_fme_port {
>> + union {
>> + u64 csr;
>> + struct {
>> + u64 port_offset:24; /* Offset to port header */
>> + u64 rsvdz1:8;
>> + u64 port_bar:3; /* Bar id */
>> + u64 rsvdz2:20;
>> + u64 afu_access_ctrl:1; /* AFU access type: PF/VF */
>> + u64 rsvdz3:4;
>> + u64 port_implemented:1; /* Port implemented or not */
>> + u64 rsvdz4:3;
>> + };
>> + };
>> +};
>> +
>> +struct feature_fme_header {
>> + struct feature_header header;
>> + struct feature_afu_header afu_header;
>> + u64 rsvd[2];
>> + struct feature_fme_capability capability;
>> + struct feature_fme_port port[MAX_FPGA_PORT_NUM];
>> +};
>> +
>> +/* FME Thermal Sub Feature Register Set */
>> +struct feature_fme_thermal {
>> + struct feature_header header;
>> +};
>> +
>> +/* FME Power Sub Feature Register Set */
>> +struct feature_fme_power {
>> + struct feature_header header;
>> +};
>> +
>> +/* FME Global Performance Sub Feature Register Set */
>> +struct feature_fme_gperf {
>> + struct feature_header header;
>> +};
>> +
>> +/* FME Error Sub Feature Register Set */
>> +struct feature_fme_err {
>> + struct feature_header header;
>> +};
>> +
>> +/* FME Partial Reconfiguration Sub Feature Register Set */
>> +struct feature_fme_pr {
>> + struct feature_header header;
>> +};
>> +
>> +/* PORT Header Register Set */
>> +/* Port Capability Register */
>> +struct feature_port_capability {
>> + union {
>> + u64 csr;
>> + struct {
>> + u64 port_number:2; /* Port Number 0-3 */
>> + u64 rsvdz1:6;
>> + u64 mmio_size:16; /* User MMIO size in KB */
>> + u64 rsvdz2:8;
>> + u64 sp_intr_num:4; /* Supported interrupts num */
>> + u64 rsvdz3:28;
>> + };
>> + };
>> +};
>> +
>> +/* Port Control Register */
>> +struct feature_port_control {
>> + union {
>> + u64 csr;
>> + struct {
>> + u64 port_sftrst:1; /* Port Soft Reset */
>> + u64 rsvdz1:1;
>> + u64 latency_tolerance:1;/* '1' >= 40us, '0' < 40us */
>> + u64 rsvdz2:1;
>> + u64 port_sftrst_ack:1; /* HW ACK for Soft Reset */
>> + u64 rsvdz3:59;
>> + };
>> + };
>> +};
>> +
>> +struct feature_port_header {
>> + struct feature_header header;
>> + struct feature_afu_header afu_header;
>> + u64 rsvd[2];
>> + struct feature_port_capability capability;
>> + struct feature_port_control control;
>> +};
>> +
>> +/* PORT Error Sub Feature Register Set */
>> +struct feature_port_error {
>> + struct feature_header header;
>> +};
>> +
>> +/* PORT Unordered Message Sub Feature Register Set */
>> +struct feature_port_umsg {
>> + struct feature_header header;
>> +};
>> +
>> +/* PORT SignalTap Sub Feature Register Set */
>> +struct feature_port_stp {
>> + struct feature_header header;
>> +};
>> +
>> +#pragma pack()
>> +
>> +struct feature {
>> + const char *name;
>> + int resource_index;
>> + void __iomem *ioaddr;
>> +};
>> +
>> +struct feature_platform_data {
>> + /* list the feature dev to cci_drvdata->port_dev_list. */
>> + struct list_head node;
>> + struct mutex lock;
>> + struct platform_device *dev;
>> + unsigned int disable_count; /* count for port disable */
>> +
>> + int num; /* number of features */
>> + struct feature features[0];
>> +};
>> +
>> +enum fme_feature_id {
>> + FME_FEATURE_ID_HEADER = 0x0,
>> + FME_FEATURE_ID_THERMAL_MGMT = 0x1,
>> + FME_FEATURE_ID_POWER_MGMT = 0x2,
>> + FME_FEATURE_ID_GLOBAL_PERF = 0x3,
>> + FME_FEATURE_ID_GLOBAL_ERR = 0x4,
>> + FME_FEATURE_ID_PR_MGMT = 0x5,
>> + FME_FEATURE_ID_MAX = 0x6,
>> +};
>> +
>> +enum port_feature_id {
>> + PORT_FEATURE_ID_HEADER = 0x0,
>> + PORT_FEATURE_ID_ERROR = 0x1,
>> + PORT_FEATURE_ID_UMSG = 0x2,
>> + PORT_FEATURE_ID_PR = 0x3,
>> + PORT_FEATURE_ID_STP = 0x4,
>> + PORT_FEATURE_ID_UAFU = 0x5,
>> + PORT_FEATURE_ID_MAX = 0x6,
>> +};
>> +
>> +int fme_feature_num(void);
>> +int port_feature_num(void);
>> +
>> +#define FPGA_FEATURE_DEV_FME "intel-fpga-fme"
>> +#define FPGA_FEATURE_DEV_PORT "intel-fpga-port"
>> +
>> +void feature_platform_data_add(struct feature_platform_data *pdata,
>> + int index, const char *name,
>> + int resource_index, void __iomem *ioaddr);
>> +
>> +static inline int feature_platform_data_size(const int num)
>> +{
>> + return sizeof(struct feature_platform_data) +
>> + num * sizeof(struct feature);
>> +}
>> +
>> +struct feature_platform_data *
>> +feature_platform_data_alloc_and_init(struct platform_device *dev, int num);
>> +
>> +int fpga_port_id(struct platform_device *pdev);
>> +
>> +static inline int fpga_port_check_id(struct platform_device *pdev,
>> + void *pport_id)
>> +{
>> + return fpga_port_id(pdev) == *(int *)pport_id;
>> +}
>> +
>> +void __fpga_port_enable(struct platform_device *pdev);
>> +int __fpga_port_disable(struct platform_device *pdev);
>> +
>> +static inline void fpga_port_enable(struct platform_device *pdev)
>> +{
>> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
>> +
>> + mutex_lock(&pdata->lock);
>> + __fpga_port_enable(pdev);
>> + mutex_unlock(&pdata->lock);
>> +}
>> +
>> +static inline int fpga_port_disable(struct platform_device *pdev)
>> +{
>> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
>> + int ret;
>> +
>> + mutex_lock(&pdata->lock);
>> + ret = __fpga_port_disable(pdev);
>> + mutex_unlock(&pdata->lock);
>> +
>> + return ret;
>> +}
>> +
>> +static inline int __fpga_port_reset(struct platform_device *pdev)
>> +{
>> + int ret;
>> +
>> + ret = __fpga_port_disable(pdev);
>> + if (ret)
>> + return ret;
>> +
>> + __fpga_port_enable(pdev);
>> + return 0;
>> +}
>> +
>> +static inline int fpga_port_reset(struct platform_device *pdev)
>> +{
>> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
>> + int ret;
>> +
>> + mutex_lock(&pdata->lock);
>> + ret = __fpga_port_reset(pdev);
>> + mutex_unlock(&pdata->lock);
>> + return ret;
>> +}
>> +
>> +static inline void __iomem *
>> +get_feature_ioaddr_by_index(struct device *dev, int index)
>> +{
>> + struct feature_platform_data *pdata = dev_get_platdata(dev);
>> +
>> + return pdata->features[index].ioaddr;
>> +}
>> +#endif
>> diff --git a/drivers/fpga/intel-pcie.c b/drivers/fpga/intel-pcie.c
>> index f697de4..70b8284 100644
>> --- a/drivers/fpga/intel-pcie.c
>> +++ b/drivers/fpga/intel-pcie.c
>> @@ -23,10 +23,827 @@
>> #include <linux/stddef.h>
>> #include <linux/errno.h>
>> #include <linux/aer.h>
>> +#include <linux/fpga/fpga-dev.h>
>> +
>> +#include "intel-feature-dev.h"
>>
>> #define DRV_VERSION "0.8"
>> #define DRV_NAME "intel-fpga-pci"
>>
>> +#define INTEL_FPGA_DEV "intel-fpga-dev"
>> +
>> +static DEFINE_MUTEX(fpga_id_mutex);
>> +
>> +enum fpga_id_type {
>> + FME_ID, /* fme id allocation and mapping */
>> + PORT_ID, /* port id allocation and mapping */
>> + FPGA_ID_MAX,
>> +};
>> +
>> +/* it is protected by fpga_id_mutex */
>> +static struct idr fpga_ids[FPGA_ID_MAX];
>> +
>> +struct cci_drvdata {
>> + struct device *fme_dev;
>> +
>> + struct mutex lock;
>> + struct list_head port_dev_list;
>> +
>> + struct list_head regions; /* global list of pci bar mapping region */
>> +};
>> +
>> +/* pci bar mapping info */
>> +struct cci_pci_region {
>> + int bar;
>> + void __iomem *ioaddr; /* pointer to mapped bar region */
>> + struct list_head node;
>> +};
>> +
>> +static void fpga_ids_init(void)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(fpga_ids); i++)
>> + idr_init(fpga_ids + i);
>> +}
>> +
>> +static void fpga_ids_destroy(void)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(fpga_ids); i++)
>> + idr_destroy(fpga_ids + i);
>> +}
>> +
>> +static int alloc_fpga_id(enum fpga_id_type type, struct device *dev)
>> +{
>> + int id;
>> +
>> + WARN_ON(type >= FPGA_ID_MAX);
>> + mutex_lock(&fpga_id_mutex);
>> + id = idr_alloc(fpga_ids + type, dev, 0, 0, GFP_KERNEL);
>> + mutex_unlock(&fpga_id_mutex);
>> + return id;
>> +}
>> +
>> +static void free_fpga_id(enum fpga_id_type type, int id)
>> +{
>> + WARN_ON(type >= FPGA_ID_MAX);
>> + mutex_lock(&fpga_id_mutex);
>> + idr_remove(fpga_ids + type, id);
>> + mutex_unlock(&fpga_id_mutex);
>> +}
>> +
>> +static void cci_pci_add_port_dev(struct pci_dev *pdev,
>> + struct platform_device *port_dev)
>> +{
>> + struct cci_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
>> + struct feature_platform_data *pdata = dev_get_platdata(&port_dev->dev);
>> +
>> + mutex_lock(&drvdata->lock);
>> + list_add(&pdata->node, &drvdata->port_dev_list);
>> + get_device(&pdata->dev->dev);
>> + mutex_unlock(&drvdata->lock);
>> +}
>> +
>> +static void cci_pci_remove_port_devs(struct pci_dev *pdev)
>> +{
>> + struct cci_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
>> + struct feature_platform_data *pdata, *ptmp;
>> +
>> + mutex_lock(&drvdata->lock);
>> + list_for_each_entry_safe(pdata, ptmp, &drvdata->port_dev_list, node) {
>> + struct platform_device *port_dev = pdata->dev;
>> +
>> + /* the port should be unregistered first. */
>> + WARN_ON(device_is_registered(&port_dev->dev));
>> + list_del(&pdata->node);
>> + free_fpga_id(PORT_ID, port_dev->id);
>> + put_device(&port_dev->dev);
>> + }
>> + mutex_unlock(&drvdata->lock);
>> +}
>> +
>> +/* info collection during feature dev build. */
>> +struct build_feature_devs_info {
>> + struct pci_dev *pdev;
>> +
>> + /*
>> + * PCI BAR mapping info. Parsing feature list starts from
>> + * BAR 0 and switch to different BARs to parse Port
>> + */
>> + void __iomem *ioaddr;
>> + void __iomem *ioend;
>> + int current_bar;
>> +
>> + /* points to FME header where the port offset is figured out. */
>> + void __iomem *pfme_hdr;
>> +
>> + /* the container device for all feature devices */
>> + struct fpga_dev *parent_dev;
>> +
>> + /* current feature device */
>> + struct platform_device *feature_dev;
>> +};
>> +
>> +static void cci_pci_release_regions(struct pci_dev *pdev)
>> +{
>> + struct cci_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
>> + struct cci_pci_region *tmp, *region;
>> +
>> + list_for_each_entry_safe(region, tmp, &drvdata->regions, node) {
>> + list_del(&region->node);
>> + if (region->ioaddr)
>> + pci_iounmap(pdev, region->ioaddr);
>> + devm_kfree(&pdev->dev, region);
>> + }
>> +}
>> +
>> +static void __iomem *cci_pci_ioremap_bar(struct pci_dev *pdev, int bar)
>> +{
>> + struct cci_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
>> + struct cci_pci_region *region;
>> +
>> + list_for_each_entry(region, &drvdata->regions, node)
>> + if (region->bar == bar) {
>> + dev_dbg(&pdev->dev, "BAR %d region exists\n", bar);
>> + return region->ioaddr;
>> + }
>> +
>> + region = devm_kzalloc(&pdev->dev, sizeof(*region), GFP_KERNEL);
>> + if (!region)
>> + return NULL;
>> +
>> + region->bar = bar;
>> + region->ioaddr = pci_ioremap_bar(pdev, bar);
>> + if (!region->ioaddr) {
>> + dev_err(&pdev->dev, "can't ioremap memory from BAR %d.\n", bar);
>> + devm_kfree(&pdev->dev, region);
>> + return NULL;
>> + }
>> +
>> + list_add(&region->node, &drvdata->regions);
>> + return region->ioaddr;
>> +}
>> +
>> +static int parse_start_from(struct build_feature_devs_info *binfo, int bar)
>> +{
>> + binfo->ioaddr = cci_pci_ioremap_bar(binfo->pdev, bar);
>> + if (!binfo->ioaddr)
>> + return -ENOMEM;
>> +
>> + binfo->current_bar = bar;
>> + binfo->ioend = binfo->ioaddr + pci_resource_len(binfo->pdev, bar);
>> + return 0;
>> +}
>> +
>> +static int parse_start(struct build_feature_devs_info *binfo)
>> +{
>> + /* fpga feature list starts from BAR 0 */
>> + return parse_start_from(binfo, 0);
>> +}
>> +
>> +/* switch the memory mapping to BAR# @bar */
>> +static int parse_switch_to(struct build_feature_devs_info *binfo, int bar)
>> +{
>> + return parse_start_from(binfo, bar);
>> +}
>
> parse_switch_to() and parse_start() are both one line wrappers for
> parse_start_from() and are only called once. :-) Please just use
> parse_start_from and get rid of parse_start and parse_switch_to. I
> don't think this code is all that super complicated. But as I'm
> grepping through this code, I'm trying to see all the places that do
> the same thing; if I have to look for multiple function names, it
> takes longer to get what is going on here.
>
> Actually, cci_pci_ioremap_bar is only called in one place -
> parse_start_from - which really just adds two lines of code.
> parse_start_from could go away. Just a suggestion. The reason this
> comes up is that cci_pci_ioremap_bar is the more descriptive function
> name. The parse_start/switch function names hide the biggest thing
> they do, which is ioremapping. They don't actually do any parsing ;)
>
>> +
>> +static struct build_feature_devs_info *
>> +build_info_alloc_and_init(struct pci_dev *pdev)
>> +{
>> + struct build_feature_devs_info *binfo;
>> +
>> + binfo = devm_kzalloc(&pdev->dev, sizeof(*binfo), GFP_KERNEL);
>> + if (binfo)
>> + binfo->pdev = pdev;
>
> build_info_alloc_and_init() is only doing a devm_kzalloc and is only
> called once. The code would be more readable if you just had the
> devm_kzalloc in the function that called this
> (cci_pci_create_feature_devs).
>
>> +
>> + return binfo;
>> +}
>> +
>> +static enum fpga_id_type feature_dev_id_type(struct platform_device *pdev)
>> +{
>> + if (!strcmp(pdev->name, FPGA_FEATURE_DEV_FME))
>> + return FME_ID;
>> +
>> + if (!strcmp(pdev->name, FPGA_FEATURE_DEV_PORT))
>> + return PORT_ID;
>> +
>> + WARN_ON(1);
>> + return FPGA_ID_MAX;
>> +}
>> +
>> +/*
>> + * register current feature device, it is called when we need to switch to
>> + * another feature parsing or we have parsed all features
>> + */
>> +static int build_info_commit_dev(struct build_feature_devs_info *binfo)
>> +{
>> + int ret;
>> +
>> + if (!binfo->feature_dev)
>> + return 0;
>> +
>> + ret = platform_device_add(binfo->feature_dev);
>> + if (!ret) {
>> + struct cci_drvdata *drvdata;
>> +
>> + drvdata = dev_get_drvdata(&binfo->pdev->dev);
>> + if (feature_dev_id_type(binfo->feature_dev) == PORT_ID)
>> + cci_pci_add_port_dev(binfo->pdev, binfo->feature_dev);
>> + else
>> + drvdata->fme_dev = get_device(&binfo->feature_dev->dev);
>> +
>> + /*
>> + * reset it to avoid build_info_free() freeing their resource.
>> + *
>> + * The resource of successfully registered feature devices
>> + * will be freed by platform_device_unregister(). See the
>> + * comments in build_info_create_dev().
>> + */
>> + binfo->feature_dev = NULL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int
>> +build_info_create_dev(struct build_feature_devs_info *binfo,
>> + enum fpga_id_type type, int feature_nr, const char *name)
>> +{
>> + struct platform_device *fdev;
>> + struct resource *res;
>> + struct feature_platform_data *pdata;
>> + int ret;
>> +
>> + /* we will create a new device, commit current device first */
>> + ret = build_info_commit_dev(binfo);
>> + if (ret)
>> + return ret;
>> +
>> + /*
>> + * we use -ENODEV as the initialization indicator which indicates
>> + * whether the id need to be reclaimed
>> + */
>> + fdev = binfo->feature_dev = platform_device_alloc(name, -ENODEV);
>> + if (!fdev)
>> + return -ENOMEM;
>> +
>> + fdev->id = alloc_fpga_id(type, &fdev->dev);
>> + if (fdev->id < 0)
>> + return fdev->id;
>> +
>> + fdev->dev.parent = &binfo->parent_dev->dev;
>> +
>> + /*
>> + * we do not need to care for the memory which is associated with
>> + * the platform device. After calling platform_device_unregister(),
>> + * it will be automatically freed by device's release() callback,
>> + * platform_device_release().
>> + */
>> + pdata = feature_platform_data_alloc_and_init(fdev, feature_nr);
>> + if (!pdata)
>> + return -ENOMEM;
>> +
>> + /*
>> + * the count should be initialized to 0 to make sure
>> + *__fpga_port_enable() following __fpga_port_disable()
>> + * works properly for port device.
>> + * and it should always be 0 for fme device.
>> + */
>> + WARN_ON(pdata->disable_count);
>> +
>> + fdev->dev.platform_data = pdata;
>> + fdev->num_resources = feature_nr;
>> + fdev->resource = kcalloc(feature_nr, sizeof(*res), GFP_KERNEL);
>> + if (!fdev->resource)
>> + return -ENOMEM;
>> +
>> + return 0;
>> +}
>> +
>> +static int remove_feature_dev(struct device *dev, void *data)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> +
>> + platform_device_unregister(pdev);
>> + return 0;
>> +}
>> +
>> +static int remove_parent_dev(struct device *dev, void *data)
>> +{
>> + /* remove platform devices attached in the parent device */
>> + device_for_each_child(dev, NULL, remove_feature_dev);
>> + fpga_dev_destroy(to_fpga_dev(dev));
>> + return 0;
>> +}
>> +
>> +static void remove_all_devs(struct pci_dev *pdev)
>> +{
>> + /* remove parent device and all its children. */
>> + device_for_each_child(&pdev->dev, NULL, remove_parent_dev);
>> +}
>> +
>> +static void build_info_free(struct build_feature_devs_info *binfo)
>> +{
>> + if (!IS_ERR_OR_NULL(binfo->parent_dev))
>> + remove_all_devs(binfo->pdev);
>> +
>> + /*
>> + * it is a valid id, free it. See comments in
>> + * build_info_create_dev()
>> + */
>> + if (binfo->feature_dev && binfo->feature_dev->id >= 0)
>> + free_fpga_id(feature_dev_id_type(binfo->feature_dev),
>> + binfo->feature_dev->id);
>> +
>> + platform_device_put(binfo->feature_dev);
>> +
>> + devm_kfree(&binfo->pdev->dev, binfo);
>> +}
>> +
>> +#define FEATURE_TYPE_AFU 0x1
>> +#define FEATURE_TYPE_PRIVATE 0x3
>> +
>> +/* FME and PORT GUID are fixed */
>> +#define FEATURE_FME_GUID "f9e17764-38f0-82fe-e346-524ae92aafbf"
>> +#define FEATURE_PORT_GUID "6b355b87-b06c-9642-eb42-8d139398b43a"
>> +
>> +static bool feature_is_fme(struct feature_afu_header *afu_hdr)
>> +{
>> + uuid_le u;
>> +
>> + uuid_le_to_bin(FEATURE_FME_GUID, &u);
>> +
>> + return !uuid_le_cmp(u, afu_hdr->guid);
>> +}
>> +
>> +static bool feature_is_port(struct feature_afu_header *afu_hdr)
>> +{
>> + uuid_le u;
>> +
>> + uuid_le_to_bin(FEATURE_PORT_GUID, &u);
>> +
>> + return !uuid_le_cmp(u, afu_hdr->guid);
>> +}
>> +
>> +/*
>> + * UAFU GUID is dynamic as it can be changed after FME downloads different
>> + * Green Bitstream to the port, so we treat the unknown GUIDs which are
>> + * attached on port's feature list as UAFU.
>> + */
>> +static bool feature_is_UAFU(struct build_feature_devs_info *binfo)
>> +{
>> + if (!binfo->feature_dev ||
>> + feature_dev_id_type(binfo->feature_dev) != PORT_ID)
>> + return false;
>> +
>> + return true;
>> +}
>> +
>> +static void
>> +build_info_add_sub_feature(struct build_feature_devs_info *binfo,
>> + int feature_id, const char *feature_name,
>> + resource_size_t resource_size, void __iomem *start)
>> +{
>> +
>> + struct platform_device *fdev = binfo->feature_dev;
>> + struct feature_platform_data *pdata = dev_get_platdata(&fdev->dev);
>> + struct resource *res = &fdev->resource[feature_id];
>> +
>> + res->start = pci_resource_start(binfo->pdev, binfo->current_bar) +
>> + start - binfo->ioaddr;
>> + res->end = res->start + resource_size - 1;
>> + res->flags = IORESOURCE_MEM;
>> + res->name = feature_name;
>> +
>> + feature_platform_data_add(pdata, feature_id,
>> + feature_name, feature_id, start);
>> +}
>> +
>> +struct feature_info {
>> + const char *name;
>> + resource_size_t resource_size;
>> + int feature_index;
>> +};
>> +
>> +/* indexed by fme feature IDs which are defined in 'enum fme_feature_id'. */
>> +static struct feature_info fme_features[] = {
>> + {
>> + .name = FME_FEATURE_HEADER,
>> + .resource_size = sizeof(struct feature_fme_header),
>> + .feature_index = FME_FEATURE_ID_HEADER,
>> + },
>> + {
>> + .name = FME_FEATURE_THERMAL_MGMT,
>> + .resource_size = sizeof(struct feature_fme_thermal),
>> + .feature_index = FME_FEATURE_ID_THERMAL_MGMT,
>> + },
>> + {
>> + .name = FME_FEATURE_POWER_MGMT,
>> + .resource_size = sizeof(struct feature_fme_power),
>> + .feature_index = FME_FEATURE_ID_POWER_MGMT,
>> + },
>> + {
>> + .name = FME_FEATURE_GLOBAL_PERF,
>> + .resource_size = sizeof(struct feature_fme_gperf),
>> + .feature_index = FME_FEATURE_ID_GLOBAL_PERF,
>> + },
>> + {
>> + .name = FME_FEATURE_GLOBAL_ERR,
>> + .resource_size = sizeof(struct feature_fme_err),
>> + .feature_index = FME_FEATURE_ID_GLOBAL_ERR,
>> + },
>> + {
>> + .name = FME_FEATURE_PR_MGMT,
>> + .resource_size = sizeof(struct feature_fme_pr),
>> + .feature_index = FME_FEATURE_ID_PR_MGMT,
>> + }
>> +};
>> +
>> +/* indexed by port feature IDs which are defined in 'enum port_feature_id'. */
>> +static struct feature_info port_features[] = {
>> + {
>> + .name = PORT_FEATURE_HEADER,
>> + .resource_size = sizeof(struct feature_port_header),
>> + .feature_index = PORT_FEATURE_ID_HEADER,
>> + },
>> + {
>> + .name = PORT_FEATURE_ERR,
>> + .resource_size = sizeof(struct feature_port_error),
>> + .feature_index = PORT_FEATURE_ID_ERROR,
>> + },
>> + {
>> + .name = PORT_FEATURE_UMSG,
>> + .resource_size = sizeof(struct feature_port_umsg),
>> + .feature_index = PORT_FEATURE_ID_UMSG,
>> + },
>> + {
>> + /* This feature isn't available for now */
>> + .name = PORT_FEATURE_PR,
>> + .resource_size = 0,
>> + .feature_index = PORT_FEATURE_ID_PR,
>> + },
>> + {
>> + .name = PORT_FEATURE_STP,
>> + .resource_size = sizeof(struct feature_port_stp),
>> + .feature_index = PORT_FEATURE_ID_STP,
>> + },
>> + {
>> + /*
>> + * For User AFU feature, its region size is not fixed, but
>> + * reported by register PortCapability.mmio_size. Resource
>> + * size of UAFU will be set while parse port device.
>> + */
>> + .name = PORT_FEATURE_UAFU,
>> + .resource_size = 0,
>> + .feature_index = PORT_FEATURE_ID_UAFU,
>> + },
>> +};
>> +
>> +static int
>> +create_feature_instance(struct build_feature_devs_info *binfo,
>> + void __iomem *start, struct feature_info *finfo)
>> +{
>> + if (binfo->ioend - start < finfo->resource_size)
>> + return -EINVAL;
>> +
>> + build_info_add_sub_feature(binfo, finfo->feature_index, finfo->name,
>> + finfo->resource_size, start);
>> + return 0;
>> +}
>
> build_info_add_sub_feature() is only called one time - here. Could
> you collapse these two functions together?
>
>> +
>> +static int parse_feature_fme(struct build_feature_devs_info *binfo,
>> + void __iomem *start)
>> +{
>> + struct cci_drvdata *drvdata = dev_get_drvdata(&binfo->pdev->dev);
>> + int ret;
>> +
>> + ret = build_info_create_dev(binfo, FME_ID, fme_feature_num(),
>> + FPGA_FEATURE_DEV_FME);
>> + if (ret)
>> + return ret;
>> +
>> + if (drvdata->fme_dev) {
>> + dev_err(&binfo->pdev->dev, "Multiple FMEs are detected.\n");
>> + return -EINVAL;
>> + }
>> +
>> + return create_feature_instance(binfo, start,
>> + &fme_features[FME_FEATURE_ID_HEADER]);
>> +}
>> +
>> +static int parse_feature_fme_private(struct build_feature_devs_info *binfo,
>> + struct feature_header *hdr)
>> +{
>> + struct feature_header header;
>> +
>> + header.csr = readq(hdr);
>> +
>> + if (header.id >= ARRAY_SIZE(fme_features)) {
>> + dev_info(&binfo->pdev->dev, "FME feature id %x is not supported yet.\n",
>> + header.id);
>> + return 0;
>> + }
>> +
>> + return create_feature_instance(binfo, hdr, &fme_features[header.id]);
>> +}
>> +
>> +static int parse_feature_port(struct build_feature_devs_info *binfo,
>> + void __iomem *start)
>> +{
>> + int ret;
>> +
>> + ret = build_info_create_dev(binfo, PORT_ID, port_feature_num(),
>> + FPGA_FEATURE_DEV_PORT);
>> + if (ret)
>> + return ret;
>> +
>> + return create_feature_instance(binfo, start,
>> + &port_features[PORT_FEATURE_ID_HEADER]);
>> +}
>> +
>> +static void enable_port_uafu(struct build_feature_devs_info *binfo,
>> + void __iomem *start)
>> +{
>> + enum port_feature_id id = PORT_FEATURE_ID_UAFU;
>> + struct feature_port_header *port_hdr;
>> + struct feature_port_capability capability;
>> +
>> + port_hdr = (struct feature_port_header *)start;
>> + capability.csr = readq(&port_hdr->capability);
>> + port_features[id].resource_size = capability.mmio_size << 10;
>> +
>> + /*
>> + * To enable User AFU, driver needs to clear reset bit on related port,
>> + * otherwise the mmio space of this user AFU will be invalid.
>> + */
>> + if (port_features[id].resource_size)
>> + fpga_port_reset(binfo->feature_dev);
>> +}
>> +
>> +static int parse_feature_port_private(struct build_feature_devs_info *binfo,
>> + struct feature_header *hdr)
>> +{
>> + struct feature_header header;
>> + enum port_feature_id id;
>> +
>> + header.csr = readq(hdr);
>> + /*
>> + * the region of port feature id is [0x10, 0x13], + 1 to reserve 0
>> + * which is dedicated for port-hdr.
>> + */
>> + id = (header.id & 0x000f) + 1;
>> +
>> + if (id >= ARRAY_SIZE(port_features)) {
>> + dev_info(&binfo->pdev->dev, "Port feature id %x is not supported yet.\n",
>> + header.id);
>> + return 0;
>> + }
>> +
>> + return create_feature_instance(binfo, hdr, &port_features[id]);
>> +}
>> +
>> +static int parse_feature_port_uafu(struct build_feature_devs_info *binfo,
>> + struct feature_header *hdr)
>> +{
>> + enum port_feature_id id = PORT_FEATURE_ID_UAFU;
>> + int ret;
>> +
>> + if (port_features[id].resource_size) {
>> + ret = create_feature_instance(binfo, hdr, &port_features[id]);
>> + port_features[id].resource_size = 0;
>> + } else {
>> + dev_err(&binfo->pdev->dev, "the uafu feature header is mis-configured.\n");
>> + ret = -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int parse_feature_afus(struct build_feature_devs_info *binfo,
>> + struct feature_header *hdr)
>> +{
>> + int ret;
>> + struct feature_afu_header *afu_hdr, header;
>> + void __iomem *start;
>> + void __iomem *end = binfo->ioend;
>> +
>> + start = hdr;
>> + for (; start < end; start += header.next_afu) {
>> + if (end - start < (sizeof(*afu_hdr) + sizeof(*hdr)))
>> + return -EINVAL;
>> +
>> + hdr = start;
>> + afu_hdr = (struct feature_afu_header *) (hdr + 1);
>> + header.csr = readq(&afu_hdr->csr);
>> +
>> + if (feature_is_fme(afu_hdr)) {
>> + ret = parse_feature_fme(binfo, hdr);
>> + binfo->pfme_hdr = hdr;
>> + if (ret)
>> + return ret;
>> + } else if (feature_is_port(afu_hdr)) {
>> + ret = parse_feature_port(binfo, hdr);
>> + enable_port_uafu(binfo, hdr);
>> + if (ret)
>> + return ret;
>> + } else if (feature_is_UAFU(binfo)) {
>> + ret = parse_feature_port_uafu(binfo, hdr);
>> + if (ret)
>> + return ret;
>> + } else
>> + dev_info(&binfo->pdev->dev, "AFU GUID %pUl is not supported yet.\n",
>> + afu_hdr->guid.b);
>> +
>> + if (!header.next_afu)
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int parse_feature_private(struct build_feature_devs_info *binfo,
>> + struct feature_header *hdr)
>> +{
>> + struct feature_header header;
>> +
>> + header.csr = readq(hdr);
>> +
>> + if (!binfo->feature_dev) {
>> + dev_err(&binfo->pdev->dev, "the private feature %x does not belong to any AFU.\n",
>> + header.id);
>> + return -EINVAL;
>> + }
>> +
>> + switch (feature_dev_id_type(binfo->feature_dev)) {
>> + case FME_ID:
>> + return parse_feature_fme_private(binfo, hdr);
>> + case PORT_ID:
>> + return parse_feature_port_private(binfo, hdr);
>> + default:
>> + dev_info(&binfo->pdev->dev, "private feature %x belonging to AFU %s is not supported yet.\n",
>> + header.id, binfo->feature_dev->name);
>> + }
>> + return 0;
>> +}
>> +
>> +static int parse_feature(struct build_feature_devs_info *binfo,
>> + struct feature_header *hdr)
>> +{
>> + struct feature_header header;
>> + int ret = 0;
>> +
>> + header.csr = readq(hdr);
>> +
>> + switch (header.type) {
>> + case FEATURE_TYPE_AFU:
>> + ret = parse_feature_afus(binfo, hdr);
>> + break;
>> + case FEATURE_TYPE_PRIVATE:
>> + ret = parse_feature_private(binfo, hdr);
>> + break;
>> + default:
>> + dev_info(&binfo->pdev->dev,
>> + "Feature Type %x is not supported.\n", hdr->type);
>> + };
>> +
>> + return ret;
>> +}
>> +
>> +static int
>> +parse_feature_list(struct build_feature_devs_info *binfo, void __iomem *start)
>> +{
>> + struct feature_header *hdr, header;
>> + void __iomem *end = binfo->ioend;
>> + int ret = 0;
>> +
>
> Maybe a helpful comment that we are stepping through a linked list of features.
>
>> + for (; start < end; start += header.next_header_offset) {
>> + if (end - start < sizeof(*hdr)) {
>> + dev_err(&binfo->pdev->dev, "The region is too small to contain a feature.\n");
>> + ret = -EINVAL;
>> + break;
>> + }
>> +
>> + hdr = (struct feature_header *)start;
>> + ret = parse_feature(binfo, hdr);
>> + if (ret)
>> + break;
>
> Instead of parse_feature, this can save off the enumeration info and
> continue to read in the linked list. After all the headers are read
> in, call the (separate) enumeration code to step through the saved
> headers, parse them, and create the devices. Since the memory is
> iomapped during the process of reading in the headers, the enumeration
> code doesn't have to be so pcie specific. Then this code base is
> better set to run on embedded devices also.
>
>> +
>> + header.csr = readq(hdr);
>> + if (!header.next_header_offset)
>> + break;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int parse_ports_from_fme(struct build_feature_devs_info *binfo)
>> +{
>> + struct feature_fme_header *fme_hdr;
>> + struct feature_fme_port port;
>> + int i = 0, ret = 0;
>> +
>> + if (binfo->pfme_hdr == NULL) {
>> + dev_dbg(&binfo->pdev->dev, "VF is detected.\n");
>> + return ret;
>> + }
>> +
>> + fme_hdr = binfo->pfme_hdr;
>> +
>> + do {
>> + port.csr = readq(&fme_hdr->port[i]);
>> + if (!port.port_implemented)
>> + break;
>> +
>> + ret = parse_switch_to(binfo, port.port_bar);
>> + if (ret)
>> + break;
>> +
>> + ret = parse_feature_list(binfo,
>> + binfo->ioaddr + port.port_offset);
>> + if (ret)
>> + break;
>> + } while (++i < MAX_FPGA_PORT_NUM);
>> +
>> + return ret;
>> +}
>> +
>> +static int create_init_drvdata(struct pci_dev *pdev)
>> +{
>> + struct cci_drvdata *drvdata;
>> +
>> + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
>> + if (!drvdata)
>> + return -ENOMEM;
>> +
>> + mutex_init(&drvdata->lock);
>> + INIT_LIST_HEAD(&drvdata->port_dev_list);
>> + INIT_LIST_HEAD(&drvdata->regions);
>> +
>> + dev_set_drvdata(&pdev->dev, drvdata);
>> + return 0;
>> +}
>> +
>> +static void destroy_drvdata(struct pci_dev *pdev)
>> +{
>> + struct cci_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
>> +
>> + if (drvdata->fme_dev) {
>> + /* fme device should be unregistered first. */
>> + WARN_ON(device_is_registered(drvdata->fme_dev));
>> + free_fpga_id(FME_ID, to_platform_device(drvdata->fme_dev)->id);
>> + put_device(drvdata->fme_dev);
>> + }
>> +
>> + cci_pci_remove_port_devs(pdev);
>> + cci_pci_release_regions(pdev);
>> + dev_set_drvdata(&pdev->dev, NULL);
>> + devm_kfree(&pdev->dev, drvdata);
>> +}
>> +
>> +static int cci_pci_create_feature_devs(struct pci_dev *pdev)
>> +{
>> + struct build_feature_devs_info *binfo;
>> + int ret;
>> +
>> + binfo = build_info_alloc_and_init(pdev);
>> + if (!binfo)
>> + return -ENOMEM;
>> +
>> + binfo->parent_dev = fpga_dev_create(&pdev->dev, INTEL_FPGA_DEV);
>> + if (IS_ERR(binfo->parent_dev)) {
>> + ret = PTR_ERR(binfo->parent_dev);
>> + goto free_binfo_exit;
>> + }
>> +
>> + ret = parse_start(binfo);
>> + if (ret)
>> + goto free_binfo_exit;
>> +
>> + ret = parse_feature_list(binfo, binfo->ioaddr);
>> + if (ret)
>> + goto free_binfo_exit;
>> +
>> + ret = parse_ports_from_fme(binfo);
>> + if (ret)
>> + goto free_binfo_exit;
>
> So ideally, there would be a function call here that read all the
> headers from hardware, ioremapping as it went along. Then after that,
> call the enumeration code to create the devices.
>
>> +
>> + ret = build_info_commit_dev(binfo);
>> + if (ret)
>> + goto free_binfo_exit;
>> +
>> + /*
>> + * everything is okay, reset ->parent_dev to stop it being
>> + * freed by build_info_free()
>> + */
>> + binfo->parent_dev = NULL;
>> +
>> +free_binfo_exit:
>> + build_info_free(binfo);
>> + return ret;
>> +}
>> +
>> /* PCI Device ID */
>> #define PCIe_DEVICE_ID_PF_INT_5_X 0xBCBD
>> #define PCIe_DEVICE_ID_PF_INT_6_X 0xBCC0
>> @@ -81,9 +898,18 @@ int cci_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *pcidevid)
>> goto release_region_exit;
>> }
>>
>> - /* TODO: create and add the platform device per feature list */
>> + ret = create_init_drvdata(pcidev);
>> + if (ret)
>> + goto release_region_exit;
>> +
>> + ret = cci_pci_create_feature_devs(pcidev);
>> + if (ret)
>> + goto destroy_drvdata_exit;
>> +
>> return 0;
>>
>> +destroy_drvdata_exit:
>> + destroy_drvdata(pcidev);
>> release_region_exit:
>> pci_release_regions(pcidev);
>> disable_error_report_exit:
>> @@ -94,6 +920,8 @@ int cci_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *pcidevid)
>>
>> static void cci_pci_remove(struct pci_dev *pcidev)
>> {
>> + remove_all_devs(pcidev);
>> + destroy_drvdata(pcidev);
>> pci_release_regions(pcidev);
>> pci_disable_pcie_error_reporting(pcidev);
>> pci_disable_device(pcidev);
>> @@ -108,14 +936,23 @@ static void cci_pci_remove(struct pci_dev *pcidev)
>>
>> static int __init ccidrv_init(void)
>> {
>> + int ret;
>> +
>> pr_info("Intel(R) FPGA PCIe Driver: Version %s\n", DRV_VERSION);
>>
>> - return pci_register_driver(&cci_pci_driver);
>> + fpga_ids_init();
>> +
>> + ret = pci_register_driver(&cci_pci_driver);
>> + if (ret)
>> + fpga_ids_destroy();
>> +
>> + return ret;
>> }
>>
>> static void __exit ccidrv_exit(void)
>> {
>> pci_unregister_driver(&cci_pci_driver);
>> + fpga_ids_destroy();
>> }
>>
>> module_init(ccidrv_init);
>> --
>> 1.8.3.1
>>

\
 
 \ /
  Last update: 2017-09-21 22:27    [W:0.280 / U:15.120 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site