lkml.org 
[lkml]   [2017]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] tee: optee: allow selection of ti-smc as a calling method
On Mon, Sep 18, 2017 at 3:50 PM, Andrew F. Davis <afd@ti.com> wrote:
> On TI platforms OP-TEE must be called using a modified SMC call,
> allow the selection of this though DT.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
> Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt | 2 ++
> drivers/tee/optee/core.c | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
> index d38834c67dff..a3275ecdf186 100644
> --- a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
> +++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
> @@ -20,6 +20,8 @@ the reference implementation maintained by Linaro.
> "hvc" : HVC #0, with the register assignments specified
> in drivers/tee/optee/optee_smc.h
>
> + "ti-smc" : Similar to "smc" with TI specific register
> + adjustments

Sigh, really? IMO, this should be determined from the compatible
string. Then the next TI (or any vendor) specific thing can be handled
without a DT change.

Maybe some day we'll figure out that not just h/w needs to be
probe-able, but all the firmware pieces do too.

Rob

\
 
 \ /
  Last update: 2017-09-19 15:37    [W:0.129 / U:11.352 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site