[lkml]   [2017]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2] ARC: reset: introduce AXS10x reset driver
Hi Philipp,

On 09/18/2017 05:07 AM, Philipp Zabel wrote:
> On Thu, 2017-09-14 at 17:28 +0300, Eugeniy Paltsev wrote:
>> ARC AXS10x boards support custom IP-block which allows to control
>> reset signals of selected peripherals. For example DW GMAC, etc...
>> This block is controlled via memory-mapped register (AKA CREG) which
>> represents up-to 32 reset lines. This regiter is self-clearing so we
>> don't need to deassert line after reset.
>> As of today only the following lines are used:
>> - DW GMAC - line 5
>>> Signed-off-by: Eugeniy Paltsev <>
>> ---
>> Changes v1 -> v2:
>> * The creg reset register is self-clearing so we don't need to clear it
>> manually. Fixed it.
>> * Use reset callback instead of assert/deassert pair.
>> * Rename reset node in documentation to "reset-controller" for consistency
>> with the other bindings.
>> * Use devm_reset_controller_register instead of reset_controller_register
>> NOTE:
>> This driver couldn't be replaced by reset-simple driver as we mustn't
>> read from reset register or clear it.
> Thanks, I've applied this patch to the reset/next branch.

Will it be OK for you to apply the corresponding DT update for platform - that way
I don't have to keep track of when ur branch hits mainline etc.

The chances of any ensuing conflicts are pretty rare - and easy to resolve if at all.

If so, Eugeniy can send the patch ur way !


 \ /
  Last update: 2017-09-18 18:15    [W:0.076 / U:1.420 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site