[lkml]   [2017]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] Support HVR-1200 analog video as a clone of HVR-1500. Tested, composite and s-video inputs.
On Sun, Sep 17, 2017 at 5:42 PM, Nigel Kettlewell
<> wrote:
> I propose the following patch to support Hauppauge HVR-1200 analog video,
> nothing more than a clone of HVR-1500. Patch based on Linux 4.9 commit
> 69973b830859bc6529a7a0468ba0d80ee5117826
> I have tested composite and S-Video inputs.
> With the change, HVR-1200 devices have a /dev/video<n> entry which is
> accessible in the normal way.
> Let me know if you need anything more.

I'm not confident the tuner config for this board is correct. The
HVR-1200 is much closer to the HVR-1250 as opposed to the HVR-1500,
and IIRC it didn't have an xc3028.

I don't dispute that with the patch in question the composite/s-video
are probably working ok, but I wouldn't recommend accepting this patch
as-is until the tuner is verified for DVB-T and analog (ideally both).

Can you provide the output of dmesg on device load? If it's filled
with a bunch of errors showing xc3028 firmware load failures, that
would be a smoking gun that it doesn't have the xc3028.


Devin J. Heitmueller - Kernel Labs

 \ /
  Last update: 2017-09-18 14:58    [W:0.055 / U:2.824 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site