lkml.org 
[lkml]   [2017]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] drivers/hwmon/pmbus: Core extensions for STATUS_WORD support and debugfs
Date
From: "Edward A. James" <eajames@us.ibm.com>

This series adds some functionality to the pmbus core.

The first two patches provide support for the STATUS_WORD register. This allows
more default alarm attributes to be used, as the upper byte of the status
register is available. The third patch then uses the STATUS_INPUT bit of the
status register to setup boolean attributes for input voltage and input power
attributes.

The fourth patch provides support for raw reads of pmbus status registers
through the debugfs interface. These can be very useful for hardware
diagnostics, especially on multi-page pmbus devices, as user-space access of
the i2c space could corrupt the pmbus page accounting.

Since RFC series:
* Just use u16 instead of complicated u8 method for STATUS_WORD.
* Re-ordered the changes.
* Added conditional for creating bool attr for higher byte STATUS_WORD bits.

Edward A. James (4):
drivers/hwmon/pmbus: Switch status registers to 16 bit
drivers/hwmon/pmbus: Access word data for STATUS_WORD
drivers/hwmon/pmbus: Add generic alarm bit for iin and pin
drivers/hwmon/pmbus: Add debugfs for status registers

drivers/hwmon/pmbus/pmbus.c | 24 +++-
drivers/hwmon/pmbus/pmbus.h | 11 ++
drivers/hwmon/pmbus/pmbus_core.c | 251 +++++++++++++++++++++++++++++++++++----
3 files changed, 263 insertions(+), 23 deletions(-)

--
1.8.3.1

\
 
 \ /
  Last update: 2017-08-10 00:21    [W:0.070 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site