lkml.org 
[lkml]   [2017]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 3/4] drivers/hwmon/pmbus: Add generic alarm bit for iin and pin
On Wed, Aug 09, 2017 at 05:19:16PM -0500, Eddie James wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> Add PB_STATUS_INPUT as the generic alarm bit for iin and pin. We also
> need to redo the status register checking before setting up the boolean
> attribute, since it won't necessarily check STATUS_WORD if the device
> doesn't support it, which we need for this bit.
>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>

For the entire series: subject should start with "hwmon: (pmbus)".

> ---
> drivers/hwmon/pmbus/pmbus_core.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 277d170..1a51f8f 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -1045,6 +1045,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
> const struct pmbus_sensor_attr *attr)
> {
> struct pmbus_sensor *base;
> + bool upper = !!(attr->gbit & 0xff00); /* need to check STATUS_WORD */
> int ret;
>
> if (attr->label) {
> @@ -1065,10 +1066,13 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
> /*
> * Add generic alarm attribute only if there are no individual
> * alarm attributes, if there is a global alarm bit, and if
> - * the generic status register for this page is accessible.
> + * the generic status register (word or byte, depending on
> + * which global bit is set) for this page is accessible.
> */
> if (!ret && attr->gbit &&
> - pmbus_check_status_register(client, page)) {
> + ((upper && pmbus_check_word_register(client, page,
> + PMBUS_STATUS_WORD)) ||
> + (!upper && pmbus_check_status_register(client, page)))) {

We already know if PMBUS_STATUS_WORD is supported or not, since
pmbus_check_status_register() will use it. Just store that knowledge
in a flag when discovered and make this something like

if (!ret && attr->gbit &&
(!upper || (upper && data->has_word_status)) &&
pmbus_check_status_register(client, page)) {

> ret = pmbus_add_boolean(data, name, "alarm", index,
> NULL, NULL,
> PB_STATUS_BASE + page,
> @@ -1324,6 +1328,7 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client,
> .func = PMBUS_HAVE_IIN,
> .sfunc = PMBUS_HAVE_STATUS_INPUT,
> .sbase = PB_STATUS_INPUT_BASE,
> + .gbit = PB_STATUS_INPUT,
> .limit = iin_limit_attrs,
> .nlimit = ARRAY_SIZE(iin_limit_attrs),
> }, {
> @@ -1408,6 +1413,7 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client,
> .func = PMBUS_HAVE_PIN,
> .sfunc = PMBUS_HAVE_STATUS_INPUT,
> .sbase = PB_STATUS_INPUT_BASE,
> + .gbit = PB_STATUS_INPUT,
> .limit = pin_limit_attrs,
> .nlimit = ARRAY_SIZE(pin_limit_attrs),
> }, {
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2017-08-10 00:54    [W:0.040 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site