Messages in this thread | | | From | Ulf Hansson <> | Date | Tue, 8 Aug 2017 12:37:25 +0200 | Subject | Re: [PATCH] mmc: host: omap_hsmmc: Add CMD23 capability to omap_hsmmc driver |
| |
On 8 August 2017 at 07:18, Kishon Vijay Abraham I <kishon@ti.com> wrote: > omap_hsmmc driver always relied on CMD12 to stop transmission. > However if CMD12 is not issued at the correct timing, the card will > indicate a out of range error. With certain cards in some of the > DRA7 based boards, -EIO error is observed. By Adding CMD23 capability, > the MMC core will send MMC_SET_BLOCK_COUNT command before > MMC_READ_MULTIPLE_BLOCK/MMC_WRITE_MULTIPLE_BLOCK commands. > > commit a04e6bae9e6f12 ("mmc: core: check also R1 response for > stop commands") exposed this bug in omap_hsmmc driver. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Thanks, applied for fixes!
Kind regards Uffe
> --- > drivers/mmc/host/omap_hsmmc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c > index 04ff3c97a535..2ab4788d021f 100644 > --- a/drivers/mmc/host/omap_hsmmc.c > +++ b/drivers/mmc/host/omap_hsmmc.c > @@ -2086,7 +2086,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) > mmc->max_seg_size = mmc->max_req_size; > > mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | > - MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE; > + MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE | MMC_CAP_CMD23; > > mmc->caps |= mmc_pdata(host)->caps; > if (mmc->caps & MMC_CAP_8_BIT_DATA) > -- > 2.11.0 >
| |